ADVANTECH ICR-4401 Router App Web Terminal User Guide

: October 30, 2023
: Advantech

Table of Contents

ADVANTECH ICR-4401 Router App Web Terminal
Description of the module
Installation
How to use
Licenses

ADVANTECH ICR-4401 Router App Web Terminal

Description of the module

The Router App Web Terminal is not included in the standard router firmware. It can be installed by following the instructions in the Configuration manual (see Chapter Related Documents). Web Terminal is a remote router command line that can be accessed by connecting to the router via ssh or Putty. The same set of commands that are used in the ssh or Putty interface can be used in the Web Terminal.

Installation

The Web Terminal can be installed like any other Router App in the Router Apps section on the router configuration page. Once the installation is complete, the module will be listed among other installed modules, and it will only add the possibility to use the Web Terminal.

How to use

Command line

To use the Web Terminal, first, you need to connect to your router. When using ssh, it should look like this:
After entering your password, the Web Terminal will be ready to use.

Licenses

The Licenses section provides information about licenses listed below in Figure 3. By clicking on the specific License button, a text file describing the copyright-terms and agreements of the specific license will open. More information about specific items can be found online.

Related Documents

Product-related documents such as Quick Start Guide, User Manual, Configuration Manual, or Firmware can be obtained from the Engineering Portal at icr. Advantech. cz address. To find the required model, go to the Router Models page and switch to the Manuals or Firmware tab. The Router Apps installation packages and manuals are available on the Router Apps page. For Development Documents, visit the DevZone page.

Used symbols

Danger – Information regarding user safety or potential damage to the router.
Attention – Problems that may arise in specific situations.
Information or notice – Useful tips or information of special interest.
Example – Example of function, command or script.

Description of the module

Router App Web Terminal is not contained in the standard router firmware. Uploading of this router app is described in the Configuration manual (see Chapter Related Docu-ments).
Web Terminal is a remote router command line, when connected to router via ssh or putty. You can use all of the same commands that are used in ssh or putty interface.

Installation

Like every other Router App, the Web Terminal is installed in Router Apps section in the router configuration page. Once the installation of the module is complete, the module is listed among other installed modules, the module itself only adds the possibility to use the Web Terminal.

How to use

Command line

Firstly, you have to connect to your router. When using ssh, it should look like this: ssh username@router_address
Password: and Web Terminal is ready.

Licenses

This section is about information about licenses listed below in Figure 3. By clicking on the specific License button you will open up a text file that describes copyright terms and agreements of the specific license. You can find more information about specific items online.

You can obtain product-related documents on Engineering Portal at icr. Advantech. cz address. To get your router’s Quick Start Guide, User Manual, Configuration Manual, or Firmware go to the Router Models page, find the required model, and switch to the
Manuals or Firmware tab, respectively.
The Router Apps installation packages and manuals are available on the Router Apps page. For the Development Documents, go to the DevZone page.
Advantech Czech s.r.o., Sokolska 71, 562 04 Usti nad Orlici, Czech Republic
Document No. APP-0111-EN, revised on October 4, 2022. Released in the Czech Republic.