ZOSI C1 Pro Smart Wi-Fi Battery Security Camera User Guide
- June 14, 2024
- ZOSI
Table of Contents
ZOSI C1 Pro Smart Wi-Fi Battery Security Camera
Product Information
The product is a camera designed for surveillance purposes. It comes with various accessories and features, including IR LEDs, HD lens, status indicator, microphone, spotlights, PIR sensor, speaker, wall mount, magnetic mount, power switch, DC 5V power port, charge indicator, micro SD card slot, and reset hole. The appearance of the camera may vary depending on the model.
Specifications
- IR LEDs : Yes
- HD Lens : Yes
- Status Indicator : Yes
- Microphone: Yes
- Spotlights: Yes
- PIR Sensor : Yes
- Speaker : Yes
- Wall Mount: Yes
- Magnetic Mount: Yes
- Power Switch: Yes
- DC 5V Power Port : Yes
- Charge Indicator: Yes
- Micro SD Card Slot : Yes
- Reset Hole : Yes
Product Usage Instructions
Power-On
To power on the camera, press and hold the power switch on the back of the
camera for 3 seconds. The network indicator lights will blink red. Then, power
on the NVR to automatically connect and display video. The camera network
indicator lights will turn into solid blue lights when connected.
Battery Charging
Before using the camera for the first time, fully charge the built-in
battery using the provided USB cable and charger. The cameras come with
partial charge when leaving the factory.
Add Extra Devices
For instructions on adding extra devices to the camera, please refer to the
tutorial video.
Mount the Camera
There are two ways to mount the camera
-
Place it on any flat surface
You can place the camera on a table, chair, TV cabinet, or any other flat surface. -
Install with Mounting Bracket
-
Unscrew the mount base and drill holes in accordance with the holes on the base.
-
Tap the drywall anchors into the wall and screw the mount base.
-
Attach the bracket to the base.
-
Screw the camera to the bracket and adjust the camera angle.
-
Install with Magnetic Bracket
Tear off the protective film on one side of the double-sided adhesive pad and stick it on the desired location. Remove the protective film on the other side and stick the bracket on the adhesive pad. Adjust the camera angle as needed.
Installation Environment
The camera’s wake-up may be affected by factors such as the distance
between the person and the camera, the height of the person, and the height
and angle of the camera.
Installation Precautions
Please follow all safety precautions and guidelines provided in the user
manual during installation to ensure proper usage and avoid any accidents.
Notification of Compliance
This device complies with Part 15 of the FCC Rules. It must not cause
harmful interference and must accept any interference received that may cause
undesired operation.
FAQ (Frequently Asked Questions)
- Q: Where can I find more details and information about the camera?
- A: For more details and information about the camera, please visit our official website at www.zositech.com.
- Q: What accessories are included in the box?
- A: The accessories included in the box are : Battery Camera, USB Cable, Mounting Screws, Adhesive Pad, Magnetic Base, Mounting Bracket, Quick Start Guide, Reset Needle, and Warning Sticker. Please note that accessories may vary depending on the model purchased.
This guide will get you going with your camera. For more details and information of the camera, please visit our official website：www.zositech.com
What’s in the box
NOTE : Accessories are subject to the model you purchased.
Gallery & Specs
NOTE : The actual appearance varies by different models.
Power-ON
Press and hold the power switch on the back of the camera for 3 seconds, the
network indicator lights blink red. Power on the NVR, the camera network
indicator’s blinking red lights will turn into solid blue lights, and the NVR
will automatically connect and display video.
NOTE : It is recommended to test that each camera can work normally before installation, if not, please contact us.
- Solid Red Light Camera’s charging Solid
- Blue Light Camera’s fully Charged
Battery Charging
Cameras come with batteries with partial charge when it leaves the factory. Before using it for the first time, please fully charge the camera with USB cable and charger before first use. Built-in battery, non-removable.
Precautions
- Do not charge the camera when the temperature is higher than 45℃ or lower than 0℃.
- Please do not charge with an adapter in a humid environment.
- If using a power adapter to charge, please use a certified power adapter.
- After fully charged, please plug the power port with the rubber plug to prevent moisture or water.
Add Extra Devices
NOTE : The camera system has been matched before shipment. After the camera is powered on, the system will automatically connect and display video.
If you want to add or reset a camera, follow the steps below.
- Press and hold the power switch on the back of the camera for 3 seconds, and you will hear “Device is waiting to connect”, and the network indicator light will flash red slowly.
- Right-click the mouse, click the Menu – Main Menu – Information – System, aim the camera at the QR code on the bottom right at a distance of 30-100cm, and scan the QR code to start pairing.
- When you hear “wireless configuration succeed” from the camera, the network indicator light comes solid red for about 20 seconds, the camera will be automatically added to the system and display video.
The operation video is as follows
Mount the Camera
- Place it on any flat surface: table, chair, TV cabinet, etc
- Install with Mounting Bracket
- Unscrew the mount base, drill holes in accordance with the holes on the base, and tap the drywall anchors into the wall and screw the mount base.
- Attach the bracket to the base.
- Screw the camera to the bracket and adjust the camera angle.
Unscrew the Mount Base
Screw the Mount Base on the Wall
Attach the Bracket to the Base
Adjust the Camera Angle
Install with Magnetic Bracket
Please wipe the wall surface and the bottom of the magnetic bracket before installation.
- Tear the protective film on one side of the double-sided tape and paste it in the position where you want to install. please noted that you have to press the double-sided tape for more than 3 minutes to squeeze the air between the double-sided tape and the wall.
- Please Tear the protective film on the other side, and fix the bracket on the surface of the double-sided tape, press the bracket and keep it for more than 3 minutes as well. For best results, you can place camera on the bracket after waiting for 10 minutes .
- Attach the camera to the magnetic bracket and adjust the camera angle.
- NOTE : Please keep the surface clean, smooth and dry. It is unsuitable for uneven wood and plaster walls.
- Tear off the protective film on one side of the double-sided adhesive pad, stick it on the location.
- Remove the protective film on the other side, and stick the bracket on the adhesive pad.
- Adjust the camera angle
Installation Environment
- Height: Install the camera 6-9 ft (2-3m) above the ground.
- Distance: Best accuracy for objects within 5-50 ft (1.5-15 m).
- Angle : Tilt the camera down about 30°-60°from the horizontal position. It is suggested to adjust the angle between camera and detected object larger than 10°.
NOTE: Wake-up of the camera will be affected by various factors, such as the distance between the person and the camera, the height of the person, the height and angle of the camera, etc.
Installation Precautions
- Do not face the camera to any light source.
- Do not point the camera at glass windows or reflective objects. Otherwise, it may result in poor image performance due to reflections from infrared LEDs, ambient lights or status lights.
- Do not mount the camera in shaded area, and point the camera towards a well-lit area. For better image quality, make sure the camera and the captured subject are at the same lighting conditions.
- For optimum performance, it is recommended that the camera be installed as far away as possible from electronic devices such as microwaves, televisions, radio phones and baby monitors to prevent signal interference.
- It is recommended to clean the lens with a soft cloth from time to time.
- Do not expose the power port to water or moisture, or blocked by dirt or other things.
- Do not install the camera where rain and snow may hit the lens directly.
- Camera may work in extremely cold conditions as low as -10°C as it will produce heat when powered on. You may power the camera indoors for a few minutes before installing it outdoors. (Only for outdoor cameras)
Notification of Compliance
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions
- This device may not cause harmful interference,
- This device must accept any interference received, including interference that may cause undesired operation.
CE Simplified EU Declaration of Conformity
ZOSI declares that product is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
Correct Dispose of this product
This marking indicates that this product should not be disposed with other
household waste throughout the EU. To prevent harm to the environment or human
health from uncontrolled waste disposal and promote the sustainable reuse of
material resources, please recycle it responsibly. To return your used device,
please use the return and collection system or contact the retailer from whom
the product was purchased. They can take this product for environmentally safe
recycling.
- www.zositech.com
- Support Email : service@zositech.com
- Facebook: https://www.facebook.com/ZosiTechnology/
- Whatsapp : +1-866-841-6932
- UK Whatsapp: +86 18675610962
Copyright © 2023 ZOSI Technology Co., Ltd.
No part of this publication may be reproduced in any way without the
written permission of ZOSI. The information in this publication is believed to
be accurate in all respects. ZOSI assumes no responsibility for any
consequenc-es resulting from their use. As our products require continuous
improvement, ZOSI reserves the right to modify product designs, specifications
and prices without notice and without any obligation. All rights reserved,and
ZOSI reserves the final interpretation right of this manual.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>