V I V O STAND-TV00M4 Swivel Bolt Down TV Stand Instruction Manual

: June 14, 2024
: V I V O

Table of Contents

SKU: STAND-TV00M4
PACKAGE CONTENTS
TOOLS NEEDED
ASSEMBLY STEPS
Documents / Resources

Bolt-Down TV Mount
Instruction Manual

SKU: STAND-TV00M4

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products /stand-tv00m4

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

****	help@vivo-us.com
www.vivo-us.com

Chat live with an agent!
| 309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

PACKAGE CONTENTS

TOOLS NEEDED

NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

ASSEMBLY STEPS

STEP 1
STEP 2
Position Pole (A) on the desktop and use a 3/16” drill bit to drill pilot holes. For desktops 1” thick, secure with M6x25mm Screws (S-C). For desktops greater than 1” thick, use M6x30mm Screws (S-D). Slide Base Cover (A1) down.

STEP 3
STEP 4
Position the VESA Bracket (B) on the back of the TV, making sure the hooks are towards the top of the TV. Secure using Screws (M-A thru M-D), M8 Washers (M-E) and a Phillips screwdriver. Spacers (M-F, M-G) are provided if needed.

STEP 5
Loosen Set Screws (B1) on VESA Brackets (B) with a Phillips screwdriver and hang TV over TV Plate (D). use a Phillips screwdriver to tighten security screws underneath to secure.

STEP 6

STEP 7

Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 02/10/2023 REV2
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
---|---|---
| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
**| help@vivo-us.com**| AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo- us.com

Documents / Resources

| V I V O STAND-TV00M4 Swivel Bolt Down TV Stand [pdf] Instruction Manual
STAND-TV00M4 Swivel Bolt Down TV Stand, STAND-TV00M4, Swivel Bolt Down TV Stand, Bolt Down TV Stand, Down TV Stand, TV Stand, Stand
---|---