WORKPRO UKCA-OL Piece Home Tool Kit Instruction Manual

Table of Contents

OPERATOR’S MANUAL OF HOME TOOL KIT

To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

Children should be supervised to ensure that they do not play with the appliance.
Always keep blades away from fingers and body and beware of cuts.
There is a risk of product damage or injury. Do not use for any other purpose.
Do not use this product for tasks beyond its capacity.
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) and protective gloves when using this product.
Always check that all mounting bolts and nuts are securely tightened before using. If any parts are missing, do not use this product until the missing parts are replaced. When servicing, use only identical replacement parts.
When selecting a socket, it is necessary to choose a suitable size according to the shape and size of the bolt and nut. If it is not correct, it is possible to slip and damage the bolt and nut.
Look behind and above you before swinging the hammer. Keep enough clearance from others.
Do not allow tape measure to retract at high speed. To avoid injury do not grasp or slide your fingers along the side of the blade, it can cut.
Do not use tools that have damaged or worn out.
Do not use pliers as hammers or pry bars.
Do not use tools near flammable or explosive materials. Sparks or heat generated by the tool can ignite these materials.
Do not use on live circuits.

This home tool kit includes the common tools you may need in your daily. Perfect for DIY or home repair and maintenance.

Following brief for reference, if set contains below tools.

Long Nose Pliers: A good choice for cutting, holding, bending, gripping, snip wire, and so on.
Diagonal Pliers: Ideal for cutting and skinning wires quickly and effectively.
Linesman Pliers: Intended for twisting or cutting wires, and clamping screws better
Groove Joint Pliers: Adjustable jaw capacity with different positions for better grasping and turning of round and irregular workpieces.
Hammer: pulling nails, prying boards and perfect for home repairs.
Screwdriver Set: Ideal for daily repairs like electronics, cameras, watches, glasses, jewelry, etc.
Tape Measure: Get walls, windows and floors measured, furniture, shelves and appliances positioned and aligned.
Torpedo Level: Used to determine the surface level.
Hex Key Wrenches: fit inside a recessed hexagonal hole in screw heads and bent into an L-shape for leverage.
Adjustable Wrench and combination wrenches adapt to mostly types of nuts and bolts, and each wrench has clear dimensioning for quickly identifying the size you need, used for automotive maintenance and repair, plumbing, and general assembly tasks.
The sockets in the tool set include virtually any common size you may need and are clearly marked, so you can easily find what you need when you need it.
The quick release ratchet handle in the tool set is designed with:
Precision machined ratchet gears provide smooth ratcheting action.
Forward/reverse switch moves smoothly for easy direction change.
Ergonomic handle design can ensure safety and ensures less fatigue.

Do not leave water or dirt on your tools, which are easy to cause them to rust. So when you have finished using your pliers, wipe them down with a clean towel, make sure they are clean and dry, and coat them with oil to prevent tools from rusting.
Wipe off the tape measure after each use to remove any dirt, dust, or debris. Do not scrub the surface with sharp objects or rough sponges, or strong acid or scrubbing cleansers, as it could damage the tape measure.
Regularly check whether all parts are in good condition. If any parts are damaged or worn, replace them immediately. Do not use a damaged or worn part, as it may break or malfunction during use.
Store tools in a dry and clean place. Avoid exposing them to moisture or extreme temperatures.
Sockets should be kept stored in a storage system such as a socket case, on socket rails or foam inserts in a toolbox.
In order to prevent loss of sockets, please recheck whether there are any missing socket after using them before putting them back into a storage system.

Distributed by
Hangzhou Great Star Industrial Co., Ltd.
No.35 Jiuhuan Road, Jiubao Town,
Hangzhou 310019, China
www.greatstartools.com