V I V O DESK-V201P-CH Height Adjustable Kids Desk Chair Instruction Manual
- June 14, 2024
- V I V O
Table of Contents
- V I V O DESK-V201P-CH Height Adjustable Kids Desk Chair
- Product Information
- Product Usage Instructions
- Assembly Steps
- Step 2
- FAQ
- Package Contents
- Included Hardware & Tools
- Tools Needed
- ASSEMBLY STEPS
- ADJUSTING CHAIR AND DESK HEIGHT
- CONTACT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
V I V O DESK-V201P-CH Height Adjustable Kids Desk Chair
Product Information
Specifications
- Product: Kids’ Height Adjustable Chair
- SKU: DESK-V201B-CH/G/P
- Weight Capacity: 220lbs (100kg)
Product Usage Instructions
Package Contents
- A (x1) Chair Leg
- B (x2) Foot
- C (x1) Right Support
- D (x1) Left Support
- E (x1) Straight Support
- F (x1) Seat Bottom
- G (x1) Seat Back
- S-A (x4) M6 Lock Washer
- S-B (x10) M6x20mm Screw
- S-C (x4) Plastic Washer
- S-D (x4) ST4.8x25mm Screw
- T-A (x1) 4mm Allen Wrench
Tools Needed
- Phillips Screwdriver
Assembly Steps
Step 1
- Place Chair Leg (A) into Feet (B).
- Secure Feet to Chair Leg using M6x20mm Screws (S-B), Metal Lock Washers (S-A), and 4mm Allen Wrench (T-A).
Step 2
- Secure the Right Support (C) up top the right side of Chair Leg (A) using M6x20mm Screws (S-B), Plastic Washers (S-C), and 4mm Allen Wrench (T-A).
- Slide Straight Support (E) into Left and Right Support (C, D). Then secure Left Support Tube to Chair Leg (A) using M6x20mm Screws (S-B), Plastic Washers (S-C), and a 4mm Allen Wrench (T-A).
Step 3
- Place Seat Bottom (F) over Right and Left Supports (C, D). Secure using ST4.8x25mm Screws (S-D) and a Phillips screwdriver.
- Slide the Seat Back (G) onto the Right and Left Supports (C, D).
Step 4
- Secure the Seat Back (G) to the Right and Left Supports (C, D) using M6x20mm Screws (S-B) and 4mm Allen Wrench (T-A). If needed, the chair can be levelled using pads on Feet (B).
Adjusting Chair & Desk Height
- To adjust the chair height, remove the 4 pre-installed screws on Chair Legs (A) using the 4mm Allen Wrench (T-A). Reinstall screws at the desired height.
FAQ
Q: What is the weight capacity of the chair?
A: The weight capacity of the chair is 220lbs (100kg).
Q: How do I adjust the chair height?
A: To adjust the chair height, remove the 4 pre-installed screws on Chair Legs (A) using the 4mm Allen Wrench (T-A). Reinstall screws at the desired height.
Q: How can I contact customer support?
A: You can contact our dedicated support team by phone, chat, or email.
- Phone: 309-278-5303
- Chat: www.vivo-us.com
- Email: help@vivo-us.com
Average response and resolution times
- Phone Resolution Time (within office hours): 5 minutes 4 seconds
- Chat Resolution Time (within office hours): less than 15 minutes
- Email Response Time (within office hrs): 1 hour 8 minutes – 23% within less than 15 minutes, 38% within less than 30 minutes, 61% within less than 1 hour, 83% within less than 2 hours, 92% within less than 3 hours.
CAUTION!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo- us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
- SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
DO NOT EXCEED WEIGHT CAPACITY
- FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY.
TIPOVER WARNING
- SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER.
- TO HELP PREVENT TIPOVER:
- NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART
- USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
- THE USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: PINCH POINT
- DO NOT PLACE HANDS ON OR NEAR SUPPORT BARS. MOVING PARTS CAN CRUSH AND CUT. PINCH POINTS ARE CREATED DURING LIFTING AND
- LOWERING THE WORK SURFACE. FAILURE TO FOLLOW THESE
- INSTRUCTIONS MAY RESULT IN SERIOUS PERSONAL INJURY.
We’re Here for You
Open Monday – Friday 7:00 am – 7:00 pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
- Give us a Call:
- 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S
- Chat Us:
- www.vivo-us.com. AVG. RESOLUTION TIME (within office hours): < 15 M
- Email Us:
- help@vivo-us.com. AVG. RESPONSE TIME (within office hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3h
Package Contents
Included Hardware & Tools
Tools Needed
Weight Capacity
ASSEMBLY STEPS
STEP 1
-
Place Chair Leg (A) into Feet (B).
-
Secure Feet to Chair Leg using M6x20mm Screws (S-B), Metal Lock Washers (S-A), and 4mm Allen Wrench (T-A).
STEP 2
- Secure the Right Support (C) up top the right side of Chair Leg (A) using M6x20mm Screws (S-B), Plastic Washers (S-C), and 4mm Allen Wrench (T-A).
- Slide Straight Support (E) into Left and Right Support (C, D). Then secure Left Support Tube to Chair Leg (A) using M6x20mm Screws (S-B), Plastic Washers (S-C), and a 4mm Allen Wrench (T-A).
STEP 3
- Place Seat Bottom (F) over Right and Left Supports (C, D). Secure using ST4.8x25mm Screws (S-D) and a Phillips screwdriver.
- Slide the Seat Back (G) onto the Right and Left Supports (C, D).
STEP 4
- Secure the Seat Back (G) to the Right and Left Supports (C, D) using M6x20mm Screws (S-B) and 4mm Allen Wrench (T-A). If needed, the chair can be levelled using pads on the Feet (B).
ADJUSTING CHAIR AND DESK HEIGHT
-
To adjust the chair height, remove the 4 pre-installed screws on Chair Legs (A) using the 4mm Allen Wrench (T-A). Reinstall screws at the desired height.
-
LAST UPDATED: 10/24/2023
-
REV2L
-
DESK-V201B-CH v2.2
-
DESK-V201G-CH v4.2
-
DESK-V201P-CH v2.2
CONTACT
- Need Help? Get In Touch
- Monday-Friday from 7:00 am-7:00pm CST
- help@vivo-us.com
- www.vivo-us.com. Chat live with an agent!
- 309-278-5303
FOR MORE GREAT VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: WWW.VIVO- US.COM.
Assembly Video & Product Info https://vivo-us.com/products/desk-v201b- ch.
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- Kids’ Height Adjustable Ergonomic Chair – VIVO - desk solutions, screen mounting, and more