Spigen PE2202UJ GaN III 352 Wall Charger User Manual
- June 14, 2024
- Spigen
Table of Contents
Spiga Arc Station Pro
Gann 352 Wall Charger
User Manual
PE2202UJ GaN III 352 Wall Charger
PE2202UJ
Instruction
- Plug it in
- Charge your phone or tablet
To ensure your safety and obtain maximum charging speeds, please use the cable provided by Spiga or the manufacturer of your device, or certified(Such as Mafi).
Important Safety Instructions
- The product is designed and developed for use with IT equipment only.
- While the product is in use, the maximum ambient temperature must not exceed 25°C.
- No naked flame sources – such as candles – should be placed near the product.
- The disconnection from line voltage is caused by AC plug.
- Please discard the product if the cords or plugs are damaged.
- Wipe the product with a dry cloth to clean it.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel (the product can be discarded in case of failure or component defects).
Specifications
| Model | PE2202UJ |
|---|---|
| Input | 100-240V~, 50/60Hz, 1.0A MAX |
| USB-C Output | Single Port Use: Total 30.0W MAX |
· USB-C Output 1: 5.0V⎓3.0A, 9.0V⎓3.0A,12.0V⎓2.5A, 15.0V⎓2.0A, 20.0V⎓1.5A
PPS 3.3~11.0V⎓3.0A(MAX) Total: 30.0W MAX
· USB-C Output 2: 5.0V⎓3.0A, 9.0V⎓3.0A, 12.0V⎓2.5A, 15.0V⎓2.0A, 20.0V⎓1.5A
PPS 3.3~11.0V⎓3.0A(MAX)Total: 30.0W MAX
Dual Port Use: Total 35.0W MAX
· USB-C Output 1: 5.0V⎓3.0A, 9.0V⎓2.77A
PPS 3.3~5.9V⎓3.0A, 3.3~11.0V⎓2.75A(MAX)
Total: 25.0W MAX
· USB-C Output 2: 5.0V⎓2.0A Total: 10.0W MAX
Total output: 35.0W MAX
Dimensions (Plug not included)| 38.0 x 40.5 x 39.0mm /1.50 x 1.59 x 1.54in
Weight| 78.0g / 2.75oz
Caution
Keep away from extreme temperatures.
Do not expose to liquids.
Avoid dropping.
Do not dismantle.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
(4) Consult the dealer or an experienced radio / TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The following importer is the responsible party (for FCC matters only) Spiga
Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA
E-mail : spigen.support@spigen.com
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B)
This device complies with Industry Canada license ICES-003.
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2)This device must accept any interference, including interference that may
cause undesired operation of the device.
Customer Service
24-month limited warranty
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given under this limited warranty.
for your purchase !
If you have any issues or concerns,
let us know at
US, EU & Others:
spigen.support@spigen.com
KR: spigen119@spigen.com
We are Prepared and Ready to Solve
Your Problems!
US and Canada Customers Only
Distributed by Spiga, Inc. in Irvine, CA 92618, USA
Manufacturer : Spiga Korea Co., Ltd.
3MN103980
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>