Spigen PE2204UJ Arc Station Pro GAN III 652 Wall Charger User Manual
- June 14, 2024
- Spigen
Table of Contents
Spigen PE2204UJ Arc Station Pro GAN III 652 Wall Charger
Specifications
- USB-C Output
- Dimensions (Plug not included): 38.0 x 40.5 x 52.0mm / 1.50 x 1.59 x 2.05in
Product Usage Instructions
Plug it in
Stecken Sie es ein. | Branchez-le. | Inserire la spina. | | . | Enchufarlo.
Note: USB Cable not included
Charge your phone or tablet or laptop
Aufladen Sie Ihr Telefon, Tablet PC oder Laptop. | portable. | Ricarica il
tuo telefono, tablet o laptop.
Caution: To ensure your safety and obtain maximum charging speeds, please
use the cable provided by Spigen or the manufacturer of your device, or
certified (Such as MFi).
EN: Please use the cable provided by Spigen or the manufacturer of your
device, or certified (Such as MFi).
JP: Spigen (:MFi)
KO: Spigen , (: MFi).
Important Safety Instructions
- The product is designed and developed for use with IT equipment only.
- No naked flame sources – such as candles – should be placed near the product.
- The disconnection from line voltage is caused by AC plug.
- Please discard the product if the cords or plugs are damaged.
- Wipe the product with a dry cloth to clean it.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel (the product can be discarded in case of failure or component defects).
- If you want to clean the product, use only a dry cloth or brush.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: (1) Reorient or
relocate the receiving antenna. (2) Increase the separation between the
equipment and receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult the dealer
or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The following importer is the responsible party (for FCC matters only): Spigen
Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA E-mail:
spigen.support@spigen.com
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B)
This device complies with Industry Canada license ICES-003. Operation is
subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including
interference that may cause undesired operation of the device.
Customer Service
EN: 24-month limited warranty
IT: garanzia limitata di 24 mesi
FAQ
Q: Is a USB cable included with the Spigen ArcStation Pro GaN 652 Wall
Charger?
A: No, the USB cable is not included.
Instruction
Plug it in
Charge your phone or tablet or laptop
To ensure your safety and obtain maximum charging speeds, please use the cable provided by Spigen or the manufacturer of your device, or certified(Such as MFi).
Important Safety Instructions
- The product is designed and developed for use with IT equipment only.
- While the product is in use, the maximum ambient temperature must not exceed 25°C.
- No naked flame sources – such as candles – should be placed near the product.
- The disconnection from line voltage is caused by AC plug.
- Please discard the product if the cords or plugs are damaged.
- Wipe the product with a dry cloth to clean it.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel (the product can be discarded in case of failure or component defects).
Caution
- Keep away from extreme temperatures
- Do not expose to liquids
- Avoid dropping
- Do not dismantle
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can
be determined by turning the equipment on and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
CAUTION : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The following importer is the responsible party (for FCC matters only) Spigen
Inc. 9975 Toledo Way #100, Irvine, CA 92618 USA
E-mail : spigen.support@spigen.com
IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB-003(B)
This device complies with Industry Canada license ICES-003.
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device
Customer Service
- 24-month limited warranty
Specifications
Please note that your rights under applicable law governing the sale of consumer goods remain erected by the warranties given under this limited warranty
If you have any issues or concerns, let us know at
US, EU & Others:
spigen.support@spigen.com
KR : spigen119@spigen.com
We are Prepared and Ready to Solve Your Problems!
US and Canada Customers Only
Distributed by Spigen, Inc. in Irvine, CA 92618, USA
Manufacturer : Spigen Korea Co., Ltd.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>