ONKRON G80 Single Monitor Desk Mount Instruction Manual

: June 14, 2024
: ONKRON

Table of Contents

Full motion desk mount
Dimension
Tools Required
Installation
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ONKRON G80 Single Monitor Desk Mount

ONKRON G80 Single Monitor Desk Mount

Full motion desk mount

Screen size
13″-32″
Tilt range
+90° – -45°
Rotation
360°
Swivel
180°
Load capacity
2-8 kg
4.4-17.6 lbs
Arm extends
0-485 mm
0″-191/s”
VESA(mm)
75×75
100×100
Height adjustment
170-415 mm
6¾”-163/a”

Dimension

Load capacity
2-8 kg
4.4-17.6 lbs
Height adjustment
170-415 mm
6¾”-163/s”
Arm extends
0-485 mm
0″-191/s”
VESA(mm)
75×75
100×100
Tilt range
+90° ~ -45°
Rotation
360°
Swivel range
180°

Thank you for choosi ng ON KRON!

We want you to be completely satisfied with your new unit. If you hove any questions, issues or safety concerns, please contact our sales team. We will respond promptly.

BECAUSE WE CARE

Shore your thoughts or ideas about our products. Help us continue to deliver the highest quality designs. Please take a moment and leave us some feed bock online.
Thank you! Sincerely, ON KRON.
If you have any questions about the assembly and operation of the product, or if the product is damaged, please contact our customer service team:
USA: info@onkron.us / +13159682278
United Kingdom (UK): support@onkron.co.uk / +442045772866
Europe: info@onkron.de / +494029996807

IMPORTANT
BEFORE installation, use the checklist to verify that all components ore included. If any parts ore missing or appear defective, contact our customer service team for a replacement. Ensure that the screen is compatible with the unit BEFORE attaching to the mounting bracket according to VESA patterns and the supported weight of the screen. Specialist assistance may be required for installation.

CAUTION

Please read the entire instructions and safety guidelines prior to assembly. Failure to do so may cause injury, product damage, and additional material damage.
Always wear suitable personal protective equipment and use the correct tools to perform the installation safely.
DO NOT exceed the maximum permissible weight of the unit, make non-factory approved modifications, use the unit outside of its factory approved purpose, or OVERTIGHTEN any assembly screws used to join components.
Use only the factory provided mounting screws as indicated in the instructions.
Ensure the construction of attaching surfaces has structural integrity capable of supporting the total weight of the unit and all additional equipment and components. In addition, pay attention to the working environment around the unit, which may cause accidental damage, such as (but not limited to) foot traffic, shelves with objects that could fall and insufficient working space. The user must exercise due diligence.
Keep children away from the assembly hardware. Small ports may cause choking if swallowed.
Warning: As the mounting surface materials may vary, you must ensure that the mounting surface is strong enough to withstand the installed product and equipment.

WARRANTY
Not subject to mandatory certification. Unlimited lifespan. 5 YEARS WARRANTY.

Tools Required

Installation

Firmly hold the two halves of the spring arm together and have another person remove the cable tie from around the spring arm.
Installation

WARNING! Stored energy hazard! DO NOT remove the cable tie from around the spring arm if you are not holding the two halves of the spring arm together.

Slowly release the pressure of the spring arm and allow it to gradually stretch to its full extension.

WARNING! Keep the front arm to its highest before taking off the monitor, otherwise, it might pop up to hurt your jaw.

C Clamp installation on the desk
Grommet hole installation
**Installation of the protective pads

OR**

Protective pads have been added to the hardware kit. WE RECOMMEND protective pad installation in the designated holes of the VESA panel.
PURPOSE:
The pads are designed to improve scratch resistance and also help reduce small amounts of vibration