ONKRON TS1881 Motorized TV Stand with Wheels Instruction Manual

ONKRON TS1881 Motorized TV Stand with Wheels

weight

Motorized mobile TV stand

Dimension

weight

Thank you for choosing ONKRON!

• We want you to be completely satisfied with your new unit. If you have any questions, issues or safety concerns, please contact our sales team. We will respond promptly.

BECAUSE WE CARE

• Share your thoughts or ideas about our products. Help us continue to deliver the highest quality designs. Please take a moment and leave us some feedback online. Thank you! Sincerely, ONKRON.
• If you have any questions about the assembly and operation of the product, or if the product is damaged, please contact our customer service team: USA: info@onkron.us / +13159682278
• United Kingdom (UK):support@onkron.co.uk / +442045772866
• Europe:info@onkron.de / +494029996807

IMPORTANT

• BEFORE installation, use the checklist to verify that all components are included. If any parts are missing or appear defective, contact our customer service team for a replacement.
• Ensure that the screen is compatible with the unit BEFORE attaching to the mounting bracket according to VESA patterns and the supported weight of the screen. Specialist assistance may be required for installation.

CAUTION

• Please read the entire instructions and safety guidelines before assembly.
• Failure to do so may cause injury, product damage, and additional material damage.
• Always wear suitable personal protective equipment and use the correct tools to perform the installation safely.
• DO NOT exceed the maximum permissible weight of the unit, make non-factory-approved modifications, use the unit outside of its factory-approved purpose, or OVERTIGHTEN any assembly screws used to join components. son the octorion etching strees as circled in the entry cations e of supporting the total weight of the unit and all additional equipment and components.
• In addition, pay attention to the working environment around the unit, which may cause accidental damage, such as (but not limited to) foot traffic, shelves with objects that could fall and insufficient working space. The user must exercise due diligence.
• Keep children away from the assembly hardware. Small parts may cause choking if swallowed.

WARRANTY

Unlimited lifespan. 5 years warranty on the TV stand, 12 months warranty on the motor.

PARTS

INSTALLATION INSTRUCTION

Base assembly

Installation of the columns on the base

Columns preparation

ATTENTION! In order to avoid accidents, two people should participate in the installation and adjustment of the TV/touchscreen panel. ****

Preparation of the motor

Disassembly of the centre part of the motor

• ATTENTION! All screws must be securely tightened.
• DO NOT OVERTIGHTEN THEM!

VESA panel installation

Assembly and installation of the shelf

• ATTENTION! “X”: the distance from the centre of the VESA panel to the bottom shelf should be more than half the width of your TV.
• ATTENTION: The second shelf of the stand cannot be installed in the range of the distance “Y”
• ATTENTION! All screws must be securely tightened. DO NOT OVERTIGHTEN THEM!

Installation of the protective pads

• Protective pads have been added to the hardware kit. WE RECOMMEND protective pad installation in the designated holes of the VESA panel.

PURPOSE:

• The pads are designed to improve scratch resistance and also help reduce small amounts of vibration.

Measure Your TV Hole Pattern

• Select TV Screws
• Select TV spacers

Rails installation on the TV

• VESA (mm) 200×200, 200×300, 200×400, 300×200, 300×300, 300×400, 400×200, 400×300, 400×400, 500×400, 600×200, 600×300, 600×400, 700×400, 700×500, 800×200, 800×400, 800×500
• ATTENTION! All screws must be securely tightened.
• DO NOT OVERTIGHTEN THEM

TV mounting

ATTENTION! In order to avoid accidents, two people should participate in the installation and adjustment of the TV/touchscreen panel.

Align the TV to the centre of the VESA panel.

Assembling the top shelf for the webcam

Upper webcam shelf installation

WARNING: While adjusting the height of the upper shelf holder DO NOT damage the motor with the shelf holder.

Connecting the power supply to the motor

Height adjustment of the stand with the remote control

• Make sure that the equipment is assembled correctly and connect the motor to the mains.
• Raise the screen to the maximum height using the remote control.
• Stay from 2m (7ft) to 5m (16.5ft) away from the stand to make adjustments.
• ATTENTION Do not use the buttons on the motor for the initial check.

Installation of the motor power supply and protective rings

Protective rings are necessary because they prevent cables from being damaged on a sharp metal edge.

Cable management

OPERATING INSTRUCTIONS

OPERATION AND STORAGE REQUIREMENTS:

• The air temperature during storage and operation should be from +5°C to +40°C.
• The relative humidity of the room should not exceed 80%. There should be no aggressive impurities in the room (acid vapours, alkalis, or other chemically active substances that can cause corrosion.
• Direct sunlight exposure to the elements of the product is not allowed. Avoid dust, dirt, shock, moisture, fire and mechanical damage.
• It is not allowed to place the product closer than 1 m (3.2 ft) to heating elements, as well as near an open fire, in damp, unheated rooms.
• The product must be installed on a flat horizontal surface with all wheels in locked position.
• When moving the product to another location, the wheels must be unlocked.
• It is forbidden to move the product by «dragging». It may cause mechanical damage.
• Do not allow children to unlock the wheels, as well as perform any other manipulations with the product. Do not allow children to play near the product.
• Do not push, pull or hang on the product with the TV, as it may fall. Do not allow children to hang or swing the product with the TV. The product with a TV installed may tip over and cause serious and even fatal injuries.
• Do not exert excessive force on the elements of the product, do not stand with your feet on the base of the product.
• If you notice any malfunction, you should immediately contact our customer service.
• Do not connect the power cord of the motor to an ungrounded outlet. Make sure that the power outlet or extension cord is grounded. The use of an outlet splitter is not recommended.
• The power supply voltage of the motor must match the voltage of your power grid.
• Keep the power cord away from any heat sources and wet surfaces.
• If you notice any problems during operation, immediately remove the plug from the power outlet and contact the ONKRON technical support team.
• Do not pull the cord to remove the plug from the outlet.
• Do not use the product if the power cord or plug is damaged.

TRANSPORT REGULATIONS:

• Recommended temperature range: from «-25°C» to «+40°C».
• Transportation of the product is allowed by any type of transport. The package should not be opened during transportation.
• After transporting the product at a temperature below zero, it is necessary to keep the product in a room with acceptable conditions for at least two hours before the start of operation.

MAINTENANCE

• Dry or wet cleaning should be carried out using only neutral detergents. Avoid using abrasive detergents and sharp objects. Avoid moving on dusty, sandy surfaces and puddles.

DISPOSA

• The product does not contain expensive and toxic materials and can be disposed of in the usual way.

WARRANTY

• The warranty period is 5 years (12 months warranty on the motor) from the date of purchase. The manufacturer guarantees the smooth operation of the product during the whole warranty period.
• The warranty service includes free repair or replacement of components that have failed through no fault of the consumer, if the product is operated according to the user manual.
• WARNING: Violation of these rules leads to acceleration of natural aging of the product material. Outdoor operation of the product also reduces its service life.
• The manufacturer reserves the right to make any changes to its products without prior notice.
• Learn morewww.onkron.us

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>