ONKRON TS1551 40 Inch Mobile Cart for TVs User Guide

: June 6, 2024
: ONKRON

Table of Contents

ONKRON TS1551 40 Inch Mobile Cart for TVs
Assembly Kit:
Base assembly
Installation of the columns to the base
Assembly and installation of the shelf
VESA-panel installation
Choose suitable bolts for VESA panel installation
Possible VESA patterns and their sizes
Upper webcam shelf installation
Cable management
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ONKRON TS1551 40 Inch Mobile Cart for TVs

Thank you for choosing us!
We hope you are happy with your purchase. If you enjoy our product, please leave your review.
If you have any questions or issues, contact us anytime and we will help you as soon as possible:

USA: sale@onkron.us / +13159682278
Europe: sale@onkron.de / +494029996807
Russia: support@onkron.ru / +78007772176

Read the entire manual before you start assembly and installation. If you have any questions about the assembly and operation of the bracket, please contact our service department.

CAUTION
Using the product with devices that exceed the allowed weight limit, improper assembly
and installation, including overtightening mounting screws, may lead to failure of your devices and the product itself, and also cause personal injuries.

Рroduct must be assembled as speciﬁed in the following assembly instructions. Improper installation may result in damage or serious personal injuries.
Safety gear and proper tools must be used. This product should be installed only by professionals.
Make sure that working surface will safely support the combined weight of the equipment and all attached hardware and components.
Use mounting screws provided in the kit and DO NOT OVERTIGHTEN any screws during assembly of the product.
This product contains small items that may cause choking if swallowed. Keep these items away from children.
Using the product improperly could lead to product failure and personal injuries.
Before mounting a screen make sure it meets all requirements of the product. Pay attention to VESA patterns, supported screen weight and diagonal.
Mounting an unsupported screen could lead to product failure and personal injuries.

IMPORTANT
Make sure you have received all parts according to the component checklist BEFORE the installation. If any parts are missing or faulty, contact your local distributor for a replacement.

MAINTENANCE
Check your product is safe to use at regular intervals (at least every three month).

WARRANTY
Not under mandatory certiﬁcation. Unlimited lifespan. 5 YEARS WARRANTY.

Assembly Kit:

Firstly unpack all components and make sure that you have all the necessary parts. If you miss any parts, please contact our support team. Check the list:

Base assembly

Lock all the wheels, as shown.
Put the package on the ﬂoor.
Put the base of the stand on it upside down.
Twist the wheels into the base use washers (E2).
Put the base on the wheels with the backside to you. Remove the package from the ﬂoor.

Installation of the columns to the base

Insert columns into the base. Cable management holes must be from the back of the stand. Look at the picture.
Use key (F2) to attach the columns to the base with bolts (A2) from above.
Use key (F2) to screw bolts (A2) from beneath of the base. Loot at the picture.
Make sure that all bolts are secure ﬁxed and the whole construction is stable.

Height adjustment of the columns

Remove ﬁxing bolt from the lower right column, suing key (F2). Put this bolt away.
Use both hands to turn and liﬅ the upper right column to a desirable height. Turn the column back; make sure that the spring loaded ball is seated in the groove. Repeat previous steps with the leﬅ column.
Set the desired height of the columns.
Use key (F2) to screw ﬁxing bolts in connections of the columns.

Assembly and installation of the shelf

Unscrew four bolts from the shelf. Use a screwdriver.
I n s t a l l s h e l f h o l d e r s by starting the bolts (1) and (3). Look at the picture.
Insert half-ring into the shelf holder. Turn the half-ring to match its position with the shelf-holder.
Repeat the previous step with the second shelf-holder.
Tighten bolts (1) and (3) using a screwdriver.
Set desirable height for the shelf on the columns and fix half-rings and shelf-holders with bolts (A2). Use key (F2). Make sure that all bolts are securely fixed.
Tighten bolts (2) and (4) using a screwdriver.

VESA-panel installation

Attach VESA panel to the columns of the stand using the mount and screws (B2) from the hardware kit.
Use key (F2).

VESA standard

Find out your TV’s VESA pattern. You can do this either by checking your TV’s characteristics or by manual measuring distance between holes on the back of your TV – horizontal and vertical. This is your VESA pattern.

Choose suitable bolts for VESA panel installation

Put the TV with the screen down on a smooth and soﬅ surface.
Try screwing bolts in the back of the TV to find suitable ones: M5, M6, or M8.
Too short bolts are not able to hold your TV.
Using bolts that are longer than required or installing them at an angle may cause damage to the internal elements of the TV.

IMPORTANT: Type of your TV will help to understand what spacers and bolt should be used.

A. Installation without spacers (flat back TVs).
B. Installation with spacers (TVs with a rounded back panel or integrated mounting holes).
An additional way of installation: plastic spacers (E1) and washers (D1) can be used between bolts А1/B1/C1/M8х50 and the rails.

Possible VESA patterns and their sizes

TV mounting

Hang your TV with installed rails onto VESA-panel of the stand.
To avoid injuries it is highly recommended to perform adjustment and installation with the help of another person.
Insert locks (D2) into their slots on the rails.
Locks must ﬁt very closely to VESA panels.
T i g h t e n s c r e w s ( C 2 ) t o ﬁ x horizontal movement of the TV. Use a screwdriver.
Align the screen to the center of the VESA-panel.