ONKRON TS1380 Mobile Wheels TV Stand Instruction Manual

ONKRON TS1380 Mobile Wheels TV Stand

Mobile Cart for TVs & Interactive Touch Panels 50″-83″

Thank you for choosing ONKRON!
We want you to be completely satisfied with your new unit. Please, if you have any questions, issues or safety concerns, please contact our sales team. We will respond promptly.

BECAUSE WE CARE

Please share your thoughts and feelings or ideas with us about our product. Help us to continue to deliver the best quality designs. Please take a moment and leave us an online review. Thank you! Sincerely, ON KRON. If you have questions about the assembly and operation of the product and if the product is damaged, do not return the product to the store! Contact our customer service:

• USA : [email protected] / +13159682278
• United Kingdom (UK): [email protected] / +442086387461
• Europe: [email protected] / +494029996807

IMPORTANT
Verify from the checklist all components are included BEFORE installation. Contact our sales support team for replacements if any parts are missing or appear defective. Verify the screen is compatible with the unit BEFORE attaching to the mounting bracket according to VESA patterns and support screen weight. Installation may require a professional.

CAUTION

• Please read the entire instructions and safety guidelines prior to assembly. Failure to do so may cause personal injury, product damage, and additional property damage.
• Always wear suitable personal protective equipment and use the correct tools to safety perform the installation.
• DO NOT exceed the maximum weight rating of the unit, make non-factory approved modifications, use the unit outside of its factory-approved purpose, or OVERTIGHTEN any assembly screws used to join components.
• Use only the factory provided mounting screws as indicated in the instructions. Ensure the construction of attaching surfaces has the structural integrity to support the combined weight of the unit and all additional hardware and components. Also, be aware of the working environment surrounding the unit which could result in accidental damage such as (but not limited to), foot traffic, shelves containing objects that may fall, and insufficient workspace. The user must exercise due diligence.
• Keep children away from the assembly hardware. The small pieces may result in choking if swallowed.

WARRANTY

Unlimited lifespan. 5 YEARS WARRANTY.

WHAT IN THE BOX

ASSEMBLY INSTRUCTION

Base assembly.

1. Lock all the wheels, as shown on the picture above.
2. Put the base of the stand on the box upside down. Twist the wheels into the base.
3. Put the base on the wheels with the back side to you.

Installation of the columns on the base.

1. Put columns into the base with the cable management holes facing the backside of the base.
2. Use two screws (G) and key (I) to fix the columns on the base from above.
3. Use two screws (Hl) and washers (H2) key (J) to fix the columns under the base.

Height adjustment

1. Remove safety screws from the columns using key (I).
2. Push simultaneously on two spring­loaded buttons on both columns and set the desired height of the stand. Buttons will automatically be fixed in the next free slot.
3. Put safety screws back in the place, where two columns are connected. Tighten them using the key (I).

ATTENTION! To avoid accidents, two people should participate in the installation and adjustment of the TV /touchscreen pa­nel.

VESA panel installation.

1. Install VESA panel on the columns using screws {K) and key {J).
2. Set desirable angle of the panel from 0° to 90°.

Rails installation on the TV /touchscreen panel.

1. Use a screwdriver to remove screws and locks from rails (R) and (L).
2. Put the rails on the backside of the TV /touchscreen panel the way they match holes. Use suitable screws to fix the rails.

ATTENTION! All screws must be securely tightened. DO NOT OVERTIGHTEN THEM !

Possible VESA patterns and their sizes.

TV /touchscreen mounting.

1. Hang your TV /touchscreen with pre­installed rails onto the VESA panel of the stand.
2. Make sure the screen is centered.
3. Install locks with screws in the rails to fix the screen and prevent movement.

ATTENTION! In order to avoid accidents, two people should participate in the installation and adjustment of the TV /touchscreen panel.

Assembly and installation of the shelf.

1. Use a screwdriver to remove four screws from the shelf.
2. Install shelf holders fixing screws 1 and 3, as shown on the picture above.
3. Put the half-ring in the shelf holder. Turn it to make a full ring and to match two holes. Repeat for the second half­ring.
4. Now you can tighten screws 1 and 3.
5. Install the shelf on the desired height. Connect the half-rings to shelf holders using screws (M8x25) and key (J).
6. Now you can put and tighten screws 2 and 4.

Cable management.

1. Insert protective rings into holes.
2. Lay cables through cable management holes from top to bottom.
3. Unlock the wheels.

Protective rings are necessary because they prevent cables from damaged on a sharp metal edge.

Importer to the USA:
BM Global Group Corp., 16801 Addison Rd, Suite 124 Addison Texas USA 75001

• Phone: +1 315 968 22 78
• [email protected]

Learn more

• www.onkron.us

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>