DrBrown s AC148-INTL Bottle Warmer and Sterilizer Instruction Manual

INSTRUCTIONS FOR USE Deluxe Bottle Warmer and Sterilizer
Model Number AC148-INTL, AC149-INTL, AC221-INTL

INSTRUCTIONS FOR USE
Package Contents:
Deluxe Bottle Warmer and Sterilizer
2x Storage Caps
Instruction Manual
Specifications:
Nominal voltage: 220-240VAC/50Hz 500W

**** IMPORTANT SAFEGUARDS

WHEN USING ELECTRICAL APPLIANCES, PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING:

• Read all instructions before operating. Detailed instructions are available online at drbrowns.co/intl
• Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury.
• Close supervision is necessary when any appliance is used near children. Do not attempt disassembly.
• Ensure that the wall outlet voltage matches the voltage of the appliance.
• Do not operate appliance after it malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
• If the supply cord or plug is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified person in order to avoid hazard.
• Place appliance on a level, heat-resistant surface.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Do not let cord hang over the edge of a table or counter, or touch hot surfaces.
• Do not use an extension cord.
• DO NOT IMMERSE IN WATER.
• HOUSEHOLD USE ONLY. Do not use outdoors.
• Unplug from outlet when not in use and before adding water.
• Do not spill liquid on cord or plug.
• Do not move appliance while in use or when it contains hot liquids.
• To operate, plug cord into wall outlet. To disconnect, ensure the unit is off, then remove plug from wall outlet.
• DO NOT open lid or reach over the appliance while in use, as steam will cause burns and serious injuries.
• DO NOT touch hot surfaces, including lid and interior parts, during use. When the cycle is complete, open lid by front tab and carefully remove contents by hand or with lift-out basket.
• Do not add water directly to warming chamber.
• Never freeze glass containers, as glass may break.
• Before feeding, pour a few drops of contents from bottle or food jar onto the back of your hand to test the temperature.
• Food should not be heated for too long.
• Always test content temperature before feeding your baby.
• Allow to cool before putting on or taking off parts.
• Unplug from outlet and allow to cool before cleaning and descaling the unit.
• Beware of steam and avoid spilling or splashing water on yourself when removing contents.
• The heating element surface is subject to residual heat after use.
• Children should not use or play with the appliance.
• Keep the appliance and its cord out of reach of children.
• Do not use appliance for other than intended use.
• Appliances are not intended to be operated by means of an external timer or separate remote-control system.
• NOT FOR SPACE HEATING PURPOSES.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be made by children without supervision.
• This appliance is designed to be used for domestic and like applications such as:
  — staff kitchen areas in shops, offices and other working environments;
  — farm houses;
  — use by hotel, motel customers and other accommodation environments;
  — bed and breakfast environments

SAVE THESE INSTRUCTIONS
PARTS:

1. Warming Chamber
2. Heating Plate (inside)
3. Controls
4. Lid
5. Reservoir
6. Lift-Out Basket
7. Warming Basket
8. Storage Caps

PREPARING FOR USE
CAUTION: Unplug from outlet before adding water.

1. Remove the reservoir from the rear of the warmer.
2. Add NON-MINERAL BOTTLED WATER to the reservoir. Replace water after 24 hours or when water is depleted (whichever comes first).
3. Put the reservoir back in place. Ensure warming basket and lift-out basket are in warming chamber. Plug into wall outlet.

CAUTION: Place appliance on a level, heat- resistant surface.

USE NON-MINERAL BOTTLED WATER
Water with minerals may shorten the life of this appliance.

| Power
---|---
| Starting Temperature Condition
| Vessel/Volume/Units Selection
| Up
| Cycle Start
| Down

WARMING
CAUTION: ALWAYS TEST CONTENT TEMPERATURE BEFORE FEEDING YOUR BABY.

1. Follow steps 1-3 in Preparing for Use section.

2. Ensure warming basket and lift-out basket are in warming chamber. Never use without baskets in place.

3. Place item into warmer as outlined below.
   BOTTLE: Remove bottle components and add storage cap for leak-free warming. Place into warming basket. FOOD JAR: Loosen lid of food jar. Place into lift-out basket, then lower into warming basket.
   Note: This warmer should only be used with plastic and glass bottles and glass food jars.
   It is not designed to heat or thaw plastic food tubs, food pouches or breast milk storage bag

4. Close the lid.

5. Press the Power Button.

6. Set warming time:
   Press the Vessel/Volume/Units Button once or twice to choose the vessel material.| Plastic Bottle
   ---|---
   | Glass Bottle

Note: Select Glass Bottle for food jar.
Use the Up or Down Arrow Button to choose a preset volume of liquid.
If your volume of liquid is not an option, select closest preset below your volume and manually increase time in the next step.
Note: Select 150 mL (5 oz) for food jar.
To change between oz and mL, hold the button for three seconds.
Press the Starting Temperature Condition Button until the temperature condition of the vessel appears.

| Room Temperature
---|---
| Refrigerated
| Frozen

Manual Time Adjustment: In Starting Temperature Condition mode, use Up or Down Arrow Button to increase or decrease time.
Note: The last used warming time is remembered for your next use.
Warming Time Chart
Times are pre-programmed for full bottles.

*For shortcut to food jar times, use Glass Bottle 150 mL / 5 oz preset.
THIS TIME CHART IS APPROXIMATE. WARMING TIMES WILL VARY DEPENDING ON THE VESSEL MATERIAL, SHAPE AND VOLUME. TEMPERED GLASS HAS BEEN TESTED FOR USE IN THIS WARMER.
CAUTION: NEVER FREEZE GLASS CONTAINERS, AS GLASS MAY BREAK.

7. Press the Cycle Start Button.
   WARNING: DO NOT open lid or reach over the appliance while in use, as steam will cause burns and serious injuries. DO NOT touch hot surfaces, including lid and interior parts, during use.

8. When the cycle is complete, the display will flash 00:00 for 60 seconds and then shut off, allowing contents to cool slightly before removal. Promptly remove vessel to avoid overheating. Gently stir or swirl content to ensure it warms evenly. DO NOT shake. **CAUTION: Open lid by front tab and carefully remove contents by hand or with lift-out basket. Beware of steam and avoid spilling or splashing water on yourself when removing contents.
   Note:** If removing lift-out basket, carefully empty liquid that collected from steam.

STERILIZING

This appliance can sterilize any item that can withstand boiling water, such as pacifiers/soothers, teethers, toys and utensils.

1. Wash items to be sterilized in hot, soapy water and rinse well.

2. Follow steps 1-3 in Preparing for Use section.

3. Ensure warming basket and lift-out basket are in warming chamber.
   Never use without baskets in place.

4. Place item into sterilizer as outlined below.
   BOTTLE: Place reservoir tube and bottle upside down in in lift-out basket. Lower into warming basket. Put remaining items inside lid. SMALL ITEMS: Place items into lift-out basket, then lower into warming basket.
   Put remaining items inside lid.

5. Close the lid.

6. Press the Power Button.

7. Press the Starting Temperature Condition Button until the Sterilize icon appears. The appliance will default to 6:00.

8. Press the Cycle Start Button.
   WARNING: DO NOT open lid or reach over the appliance while in use, as steam will cause burns and serious injuries. DO NOT touch hot surfaces, including lid and interior parts, during use.

9. When the cycle is complete, the display will flash 00:00 for 60 seconds and then shut off, allowing contents to cool slightly before removal.
   CAUTION: Open lid by front tab and carefully remove contents by hand or with lift-out basket. Beware of steam and avoid spilling or splashing water on yourself when removing contents.

TROUBLESHOOTING

If the warmer is not operating, check that:

1. The power cable is connected to the power outlet.
2. Water has been added to the reservoir.
3. The appliance is correctly assembled.
4. If display shows the error “ERR-H2O,” the warmer has low water condition.
   Unplug from power. Fill water to the correct level. Reconnect to Power.

CLEANING

CAUTION: Unplug from outlet and allow to cool before cleaning and descaling. DO NOT IMMERSE IN WATER.
Note: Regularly check the heating plate for milk residue or mineral deposits. As mineral deposits build, it can slow or disrupt the warming process/sterilizing cycle. Using non-mineral bottled water can help prevent buildup, but regular descaling is needed for best performance. See cleaning instructions below to remove milk and descaling instructions to remove mineral deposits. DO NOT use bleach, scouring pads, abrasive cleaners or solvents for cleaning or descaling.
WARMING CHAMBER: Wipe all surfaces with a damp cloth or sponge.
WARMING BASKET, LIFT-OUT BASKET, LID AND RESERVOIR: Clean in hot, soapy water and rinse well, or in a dishwasher (top rack only). Allow to air dry.
Descaling
If buildup forms on the heating plate, follow the steps below.

1. Empty reservoir and baskets.
2. Descale utilizing a mixture of vinegar/water:

A Mix 50 mL (2 oz) of white vinegar with 100 mL (4 oz) of non-mineral bottled water in reservoir.
Note: Ensure proper ventilation when cleaning with vinegar.
B Plug into wall outlet, press the Power Button and run a Sterilize cycle.
C When the cycle is complete, ensure the unit is off and remove plug from wall outlet.
D Remove vinegar and water solution from warming chamber and reservoir.
Thoroughly rinse with clean water.

WARRANTY

This warming appliance is warranted against defective material or workmanship for a period of one year from the date of purchase. Any defective part will be repaired or replaced at no charge if it has not been tampered with and appliance has been used according to these printed instructions.
This warranty does not cover a defect that has been caused by negligence, accidents or improper use of the appliance. To keep this appliance in good condition and retain your warranty, USE ONLY AS DIRECTED.
CUSTOMER SERVICE
If you experience unsatisfactory operation or have questions/comments, please contact your local Dr. Brown’s distributor. See drbrownsbaby.com/distributors to find your local contact.

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environment safe recycling.

HANDI–CRAFT COMPANY
ST. LOUIS, MISSOURI 63116 USA/EE.UU.
©2023 Handi-Craft Company.
All Rights Reserved.
WSP002-INTL_F5

Documents / Resources

| DrBrown s AC148-INTL Bottle Warmer and Sterilizer [pdf] Instruction Manual
AC148-INTL, AC148-INTL Bottle Warmer and Sterilizer, Bottle Warmer and Sterilizer, Warmer and Sterilizer, AC149-INTL, AC221-INTL
---|---

References

• International Product Instructions | Dr. Brown's Baby
• Distributors Archive | Dr. Brown's Baby

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>