DrBrown s WSP006 Bottle Sterilizer and Dryer Instructions
- June 14, 2024
- DrBrown s
Table of Contents
DrBrown’s WSP006 Bottle Sterilizer and Dryer
Product Information
Specifications
- Model Number: AC178-INTL, AC179-INTL, AC180-INTL, and AC219-INTL
- Nominal Voltage: 220-240 VAC
- Frequency : 50-60 Hz
- Power : 600 W
Parts
- Lid
- Tray
- Removable Handle
- Lower Rack
- Heating Plate
- Base
- Control Panel
- Measuring Cup
- Filter
- Filter Cover
Preparing for Use
- Wash items to be sterilized in hot, soapy water and rinse well.
- Position the appliance on a level, heat-resistant surface.
- Remove the lower rack, tray, and lid from the base.
- Fill the measuring cup to the solid FILL LINE (110 mL) with NON-MINERAL BOTTLED WATER and pour the water onto the heating plate. For the Dry Only function, do not add water. Note: For best performance, use non-mineral bottled water and descale monthly. Water with minerals may shorten the life of this appliance.
- CAUTION : DO NOT EXCEED the recommended amount of water.
- Place the lower rack on the base. Arrange bottles or cups upside down over prongs and add other items as per the suggested arrangements.
Using the Appliance
Sterilize Only
- Press the Power Button. Note: When the sterilizer is turned on, the appliance will beep and the indicator above the power button will light up.
- Press the Sterilize Only Button. The appliance will beep one time and the sterilization cycle will start.
- WARNING : DO NOT open the lid or reach over the appliance while in use, as steam will cause burns and serious injuries. DO NOT touch hot surfaces, including the lid, tray, and lower rack, during or immediately after use.
Dry Only
- Press the Power Button.
- Note : When the sterilizer is turned on, the appliance will beep and the indicator above the power button will light up.
- Press the Dry Only Button. The appliance will beep one time and the drying cycle will start.
- CAUTION : As the unit switches from the sterilization to the drying cycle, it is expected to see a large initial release of steam as the fan turns on. Keep a safe distance from the unit while this cycle is in process.
- WARNING : DO NOT open the lid or reach over the appliance while in use, as steam will cause burns and serious injuries. DO NOT touch hot surfaces, including the lid, tray, and lower rack, during or immediately after use.
Sterilize and Dry
- Press the Power Button. Note: When the sterilizer is turned on, the appliance will beep and the indicator above the power button will light up.
- Press the Automatic Sterilize/Dry Button. The appliance will beep one time and the sterilization cycle will start.
- WARNING : DO NOT open the lid or reach over the appliance while in use, as steam will cause burns and serious injuries. DO NOT touch hot surfaces, including the lid, tray, and lower rack, during or immediately after use.
- When the sterilization cycle is complete, the drying cycle will begin automatically. The drying cycle lasts approximately 45 minutes.
- CAUTION : As the unit switches from the sterilization to the drying cycle, it is expected to see a large initial release of steam as the fan turns on. Keep a safe distance from the unit while this cycle is in process.
- When the drying cycle is complete, the appliance will beep 5 times and switch off automatically.
FAQ
How often should I describe the appliance?
It is recommended to describe the appliance monthly for the best performance.
Can I use mineral water in the sterilizer?
It is recommended to use non-mineral bottled water for best performance. Water
with minerals may shorten the life of the appliance.
How long does the drying cycle last?
The drying cycle lasts approximately 45 minutes.
READ AND SAVE THESE INSTRUCTIONS
Package Contents:
- Bottle Sterilizer and
- Dryer Measuring Cup
- 2 Filters
- Instruction Manual
Specifications :
Nominal voltage : 220-240 VAC, 50-60 Hz, 600 W
IMPORTANT SAFEGUARDS
WHEN USING ELECTRICAL APPLIANCES, PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO
REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND INJURY TO PERSONS, INCLUDING
THE FOLLOWING:
- Read all instructions before operating. Detailed instructions are available online at drbrowns.com/intl
- Failure to operate the product correctly can result in damage to the product, and personal property and cause serious injury.
- Close supervision is necessary when any appliance is used near children. Do not attempt disassembly.
- Ensure that the wall outlet voltage matches the voltage of the appliance.
- Do not operate appliance after it malfunctions or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
- If the supply cord or plug is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid hazard.
- Place the appliance on a level, heat-resistant surface.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
- Do not use an extension cord.
- DO NOT IMMERSE IN WATER.
- HOUSEHOLD USE ONLY.
- Do not use outdoors.
- Unplug from the outlet when not in use and before adding water.
- Do not spill liquid on a cord or plug.
- Do not move the appliance while in use or when it contains hot liquids.
- To operate, plug the cord into a wall outlet. To disconnect, press the power button, then remove the plug from the wall outlet.
- DO NOT open the lid or reach over the appliance while in use, as steam will cause burns and serious injuries.
- DO NOT touch hot surfaces, including the lid, tray, and lower rack, during or immediately after use.
- After sterilizing, wait 10 minutes for the parts to cool, then open the lid carefully by the handle and beware of residual steam.
- DO NOT EXCEED the recommended amount of water.
- If it is necessary to drain water from the base, always POUR AWAY FROM YOU.
- As the unit switches from the sterilization to the drying cycle, it is expected to see a large initial release of steam as the fan turns on. Keep a safe distance from the unit while this cycle is in process.
- Unplug from the outlet and allow to cool for 60 minutes before cleaning and descaling the unit or replacing the filter.
- Be careful to avoid spilling or splashing water on yourself when removing contents.
- The heating element surface is subject to residual heat after use.
- Children shall not use or play with the appliance.
- Keep the appliance and its cord out of reach of children.
- Do not use the appliance for other than intended use.
- Appliances are not intended to be operated using an external timer or separate remote-control system.
- NOT FOR SPACE HEATING PURPOSES.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Cleaning and user maintenance shall not be done by children without supervision.
- This appliance is designed to be used for domestic and like applications such as:
- staff kitchen areas in shops, offices, and other working environments;
- farm houses;
- use by the hotel, motel customers, and other accommodation environments;
- bed and breakfast environments
SAVE THESE INSTRUCTIONS
PARTS
- Lid
- Tray
- Removable Handle
- Lower Rack
- Heating Plate
- Base
- Control Panel
- Measuring Cup
- Filter
- Filter Cover
PREPARING FOR USE
CAUTION : Unplug from the outlet before adding water.
- Wash items to be sterilized in hot, soapy water and rinse well.
- Position the appliance on a level, heat-resistant surface.
- Remove the lower rack, tray, and lid from the base.
- Fill the measuring cup to the solid FILL LINE (110 mL) with NON-MINERAL BOTTLED WATER and pour the water ONTO THE HEATING PLATE. For the Dry Only function, do not add water.
- Note : For best performance, use non-mineral bottled water and descale monthly. Water with minerals may shorten the life of this appliance.
- CAUTION : DO NOT EXCEED the recommended amount of water.
- Place the lower rack on the base. Arrange bottles or cups upside down over prongs and add small items in the remaining space. If using Dr. Brown’s® bottles, see below for suggested arrangements.
- Stack the tray on top of the lower rack and add additional small items.
- Note : This appliance can sterilize any item that can withstand boiling water, such as pacifiers/sooths, teethers, toys, and utensils.
- Place the lid on top of the tray. Ensure that the lid fits securely on the tray without any gaps.
- Plug into a wall outlet.
Suggested Arrangements
NARROW BOTTLES
- A. Bottles
- B. Reservoir tubes
- C. (Tray) Bottle parts: nipples/teats, collars, caps and travel disks
WIDE-NECK BOTTLES
- D. Reservoir tubes
- E. Bottles
- F. Caps (2 on bottom, 4 on top)
- G. (Tray) Bottle parts: nipples/teats, collars and travel disks
SMALL ITEMS
- H. (Tray) Pacifiers/soothers, teethers, etc
USING THE APPLIANCE
- Press the Power Button
Note : When the sterilizer is turned on, the appliance will beep and the indicator above the power button will light up
Choose the desired function:
Automatic Sterilize/Dry
- A. Press the Automatic Sterilize/Dry Button. The appliance will beep one time and the sterilization cycle will start.
- WARNING : DO NOT open the lid or reach over the appliance while in use, as steam will cause burns and serious injuries. DO NOT touch hot surfaces, including the lid, tray, and lower rack, during or immediately after use.
- B. When the sterilization cycle is complete, the drying cycle will begin automatically. The drying cycle lasts approximately 45 minutes.
- CAUTION : As the unit switches from the sterilization to the drying cycle, it is expected to see a large initial release of steam as the fan turns on. Keep a safe distance from the unit while this cycle is in process.
- C. When the drying cycle is complete, the appliance will beep 5 times and switch off automatically.
Sterilize Only
- A. Press the Sterilize Only Button. The appliance will beep one time and the sterilization cycle will start.
- WARNING: DO NOT open the lid or reach over the appliance while in use, as steam will cause burns and serious injuries. DO NOT touch hot surfaces, including the lid, tray, and lower rack, during or immediately after use.
- B. When the sterilization cycle is complete, the appliance will beep 5 times and switch off automatically.
- Note : This cycle lasts approximately 9 minutes but may vary by the amount of water you add, the number of items to be sterilized, and other environmental factors.
- CAUTION : Wait 10 minutes for parts to cool, then open the lid carefully by the handle and beware of residual steam.
Note : If there is not enough water added, incomplete sterilization may occur. If the unit is not able to sterilize completely, it will beep and the indicator light will flash for one hour. If this happens, wait 10 minutes to allow the unit to cool, then add water to the solid FILL LINE of the measuring cup (110 mL), pour the water onto the heating plate, and restart the sterilization cycle.
Dry Only
- A. Press the Dry Only Button. The appliance will beep one time and the drying cycle will start.
- B. When the drying cycle is complete, the appliance will beep 5 times and switch off automatically. This cycle lasts approximately 45 minutes.
- Note : Any cycle can be stopped at any time by pressing the power button.
- CAUTION : If it is necessary to drain water always POUR AWAY FROM YOU, as shown by the symbol on base.
CLEANING THE APPLIANCE
CAUTION : Unplug from the outlet and cool for 60 minutes before cleaning. DO NOT IMMERSE IN WATER.
Clean at least once a week when in regular use.
- BASE AND HEATING PLATE: Wipe all surfaces with a damp cloth or sponge.
- TRAY, LID, LOWER RACK AND MEASURING CUP : Clean in hot, soapy water and rinse well, or in a dishwasher (top rack only). Allow to air dry.
Note :
- DO NOT use scouring pads, abrasives, bleach, or solvents for cleaning.
- DO NOT disassemble the base. There are no serviceable parts inside.
DESCALING
CAUTION : Unplug from the outlet and allow to cool for 60 minutes before descaling. Mineral deposits, like limescale, may form on the metal heating element in the base. As the mineral deposits build, it can slow or disrupt the sterilization cycle. Depending on the water type in your area, mineral deposits may vary in appearance but the harder the water, the quicker it builds up. Mineral deposits are not known to be harmful, but they may impair the function of appliances or damage components. Using non-mineral bottled water can help prevent buildup, but regular descaling is needed for best performance. To remove the mineral deposits, follow the steps below.
- Remove the lower rack, tray, and lid from the base.
- Descale utilizing a mixture of vinegar/water:
- A. Fill the measuring cup to the dashed line (80 mL) with white vinegar.
- B. Add 30 mL of non-mineral bottled water to reach the solid FILL LINE of the measuring cup (110 mL total).
- C. Pour the mixture ONTO THE HEATING PLATE.
- D. Reassemble the empty unit.
- E. Plug into a wall outlet, press the Power Button, and run a Sterilize Only cycle.
- F. Empty any remaining solution and rinse with clean water.
* **N** ote: Do not use bleach, harsh abrasives, or solvents to clean the heating plate, as they may cause permanent damage and may void the warranty.
REPLACING THE FILTER
CAUTION : Unplug from the outlet and allow to cool for 60 minutes before replacing the filter. Replace the filter every six months of regular use for optimal performance.
Follow the steps below:
- The filter is located at the bottom of the base. Gently squeeze the latches on the filter cover to remove it.
- Remove and replace the filter, ensuring the pull tab is still visible on top of the filter.
- Snap the filter cover back into position.
- Note : Filter must always be used to ensure proper performance.
2 filters are included. To purchase replacement filters, contact your local distributor.
WARRANTY
This appliance is warranted against defective material or workmanship for a
period of one year from the date of purchase. Any defective part will be
repaired or replaced at no charge if it has not been tampered with and the
appliance has been used according to these printed instructions. This warranty
gives you specific legal rights as well as other rights which vary from state
to state. This warranty does not cover a defect that has been caused by
negligence, accidents, or improper use of the appliance. To keep your Dr.
Brown’s™ Bottle Sterilizer and Dryer in good condition and retain your
warranty, USE ONLY AS DIRECTED.
CUSTOMER SERVICE
If you experience unsatisfactory operation or have questions/comments, please
contact your local Dr. Brown’s distributor. See
drbrownsbaby.com/distributors to find
your local contact.
HANDI-CRAFT COMPANY ST. LOUIS, MISSOURI 63116 USA/EE.UU 02023 Handi-Craft Company. All Rights Reserved.
Distributie Nederland 5091 SB Westelbeers www.babycase.nl www.drbrowns.nl
This marking indicates that this product should not be disposed of with other household wastes throughout. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources To return your used device, please use the return and collection systems or contact the retailer where the product was purchased They can take this product for environment safe recycling
WSP006-INTL_F7
References
- International Product Instructions | Dr. Brown's Baby
- The #1 Pediatrician Recommended Baby Bottle | Dr. Brown's Baby
- Distributors Archive | Dr. Brown's Baby
- Patent Information | Dr. Brown's Baby
- Baby Case
- Dr. Brown's • Het beste voor uw baby