Leviton T5633-W Wall Charger Tamper-Resistant Installation Instruction
- June 14, 2024
- Leviton
Table of Contents
Leviton T5633-W Wall Charger Tamper-Resistant
WARNINGS AND CAUTIONS:
- TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF THE POWER AT THE CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING!
- To be installed and/or used in accordance with appropriate electrical codes and regulations.
- If you are not sure about any part of these instructions, consult an electrician.
- This device CANNOT be used for separate feed applications. If the outlet you are replacing has the top and bottom outlets controlled by separate circuit breakers, you cannot use this device
- To be used with Class 2 connectors with interconnecting cables.
- The Class 2 USB ports are not intended for use with appliances and supporting products.
- All connected Class 2 output cables must be routed away from the receptacle slots or any plug/cord inserted into the receptacle.
- Use this device with copper or copper-clad wire only.
- Use this device with wires rated for at least 75°C.
INSTALLATION INSTRUCTIONS
FEATURES
The Duplex Type A & C USB Charger / Tamper Resistant Outlet provides:
- One Type A and one Type C 5VDC powered USB port with a combined
- Total of 5.1A charging current.
- Two 15A-125VAC or 20A-125VAC outlets.
- The USB ports are used to charge portable electronic devices ONLY (NO data transfer capability).
INSTALLATION
- TO AVOID FIRE, HOCK, OR DEATH; TURN OFF THE POWER AT THE CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF BEFORE WIRING!
- This device is to be installed in a wall box measuring at least
- x 2″ x 2-1/2″ (standard single gang electrical wall box) and wired by NEC article 314 box fill requirements.
- Connect wires per WIRING DIAGRAM as follows:
- NOTE: Back and Side wire terminals accept #14-#12 AWG copper or copper-clad wires.
- To Side Wire (if more than one wire is required on a terminal, you cannot side wire and must use the back wire option):
- Remove the insulation from each circuit conductor per strip gauge on the device [approx. 3/4″ (1.9 cm)].
- Loop wires clockwise 3/4 turn around terminal screws. Tighten screws over wire loop (apply torque value of 14 -18 in-lbs).
- To Back Wire:
- Remove the insulation from each circuit conductor [approx. 1/2″ ( 1.3 cm)]. Insert straight wires under clamps next to appropriate terminal screws. Tighten screws FIRMLY.
- Mount the device in the wall box with the screws provided and mount the wallplate.
- Restore power at the circuit breaker or fuse. Installation is complete USB Charger
Wiring Diagram
WARRANTY
LIMITED 2 YEAR WARRANTY AND EXCLUSIONS
Leviton warrants to the original consumer purchaser and not for the benefit of anyone else that this product at the time of its sale by Leviton is free of defects in materials and workmanship under normal and proper use for two years from the purchase date. Leviton’s only obligation is to correct such defects by repair or replacement, at its option. For details visit www.leviton.com or call 1-800-824-3005. This warranty excludes and there is disclaimed liability for labor for removal of this product or reinstallation. This warranty is void if this product is installed improperly or in an improper environment, overloaded, misused, opened, abused, or altered in any manner, or is not used under normal operating conditions or not in accordance with any labels or instructions. There are no other or implied warranties of any kind, including merchantability and fitness for a particular purpose, but if any implied warranty is required by the applicable jurisdiction, the duration of any such implied warranty, including merchantability and fitness for a particular purpose, is limited to two years. Leviton is not liable for incidental, indirect, special, or consequential damages, including without limitation, damage to, or loss of use of, any equipment, lost sales or profits or delay or failure to perform this warranty obligation. The remedies provided herein are the exclusive remedies under this warranty, whether based on contract, tort or otherwise.
FCC
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation of the device.
FOR CANADA ONLY
For warranty information and/or product returns, residents of Canada should
contact Leviton in writing at Leviton Manufacturing of Canada ULC to the
attention of the Quality Assurance Department, 165 Hymus Blvd, Pointe-Claire
(Quebec), Canada H9R 1E9 or by telephone at 1 800 405-5320
FAQs
What is the Leviton T5633-W Wall Charger Tamper-Resistant?
The Leviton T5633-W is a wall charger with tamper-resistant outlets, designed to provide a convenient and safe way to charge electronic devices.
Is the Leviton T5633-W compatible with USB-powered devices?
Yes, the Leviton T5633-W features USB ports, making it compatible with a variety of USB-powered devices such as smartphones, tablets, and other electronic gadgets.
Does the wall charger have tamper-resistant outlets?
Yes, the Leviton T5633-W is equipped with tamper-resistant outlets, adding an extra layer of safety by preventing the insertion of foreign objects into the outlets.
What is the charging capacity of the USB ports on the Leviton T5633-W?
The charging capacity of the USB ports may vary, and users should refer to the product specifications for details on the charging capabilities of the Leviton T5633-W.
Is the Leviton T5633-W suitable for residential and commercial use?
Yes, the Leviton T5633-W is suitable for both residential and commercial applications, providing a versatile solution for charging devices in various settings.
Can the Leviton T5633-W be installed in a standard electrical wall box?
Yes, the Leviton T5633-W is designed to fit into a standard electrical wall box, making it easy to install in existing electrical setups.
Does the wall charger come with installation instructions?
Yes, the Leviton T5633-W typically comes with installation instructions to guide users through the installation process. It is recommended to follow these instructions for a safe and proper installation.
What color options are available for the Leviton T5633-W Wall Charger?
The Leviton T5633-W is available in various color options. Users can choose the color that best suits their preferences or matches their existing decor.
Is the Leviton T5633-W compliant with safety standards?
Yes, the Leviton T5633-W is designed and tested to comply with safety standards to ensure the protection of users and connected devices.
Does the Leviton T5633-W have surge protection for connected devices?
Some models of the Leviton T5633-W may feature surge protection for connected devices. Users should check the product specifications to confirm this feature.
Can the USB ports be used simultaneously with the electrical outlets?
Yes, the USB ports on the Leviton T5633-W can usually be used simultaneously with the electrical outlets, allowing users to charge multiple devices at the same time.
Is the Leviton T5633-W compatible with smart home systems?
The Leviton T5633-W is not typically designed for integration with smart home systems. Users looking for smart home compatibility should explore other products designed for such purposes.
What is the warranty period for the Leviton T5633-W Wall Charger?
The Leviton T5633-W may come with a limited warranty. Users are advised to check the product documentation or contact the manufacturer for warranty details.
Download This PDF Link: Leviton T5633-W Wall Charger Tamper-Resistant Installation Instruction