PETKIT CVM-D-MI Pura Max Self Cleaning Cat Litter Box User Guide

PETKIT CVM-D-MI Pura Max Self Cleaning Cat Litter Box

Product Information

• The product is a smart pet litter box.
• It comes with a waste collection bin, accessories, and a N50 Pet Odor Eliminator.
• The device requires a power supply to operate.
• It has a maintenance mode for cleaning and maintenance purposes.
• The product is compatible with the PETKIT app for additional features.
• It is recommended to use cat litter with particles not exceeding 1.2cm in length and 3mm in diameter.

Version: V1.0

Product Usage Instructions

1. Before use, remove the tapes on the main body and place the machine on a horizontal hard ground, leaving a 5-10cm (2-4in) distance from the wall.
2. Scan the QR code to watch the installation and use video.
3. Open the latch to the right.
4. Pull out the waste collection bin, open the upper cover, and take out the accessories inside.
5. Lay the trash bag flat on the waste collection bin and close the upper cover.
6. Take out the N50 Pet Odor Eliminator, place it in the groove, and close the silicone cover tightly.
7. Install the waste collection bin back and close the latch.
8. Connect the power supply and turn on the device.
9. Short press the button to switch to Maintenance mode.
10. Short press the button to execute the maintenance mode.
11. When the cylinder entrance is facing up and stopped, pour 1 bag of regular cat litter.
12. Short press the button to exit Maintenance mode.
13. Scan the QR code to download the PETKIT app.
14. Enter the homepage of the app and click ‘+’ to add and bind the device.

Using Instructions

NOTE: Before use, please remove the tapes on the main body and place the machine on a horizontal hard ground, leaving a 5-10cm (2-4in) distance from the wall.

1. Open the latch to the right.
2. Pull out the waste collection bin, open the upper, cover of it, and take out the accessories inside.
3. Lay the trash bag flat on the waste collection bin, and close the upper cover.
4. Take out the N50 Pet Odor Eliminator, place it in the groove and close the silicone cover tightly.
5. Install the waste collection bin back and close the latch.
6. Connect the power supply and turn the device on, short press the to switch to Maintenance mode, and then short press the OK button to execute.
7. When the cylinder entrance facing up and stopped, pour 1 bag of regular cat litter, and short press the OK button to exit Maintenance mode.
   • Warning: Please do not use large particle cat litter with length over 1.2cm (0.47in) and diameter over 3mm (0.12in).
8. Scan the QR code to download the PETKIT app, enter the homepage, click “+” to add and bind the device.

Scan QR code to watch installation & use video

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>