BABYMOOV A014014 Simply Care Audio Baby Monitor Instruction Manual

BABYMOOV A014014 Simply Care Audio Baby Monitor

Thank you for choosing our Baby monitor Simply Care. We recommend you read these instructions carefully in order to use your Baby monitor to the best advantage and ensure it continues to operate as long as possible. If you should find a fault, however, or if you have any problem, please contact our company.
IMPORTANT. You have bought a product with an analog technology, if your product makes a puff as background noise it is perfectly normal: it is caused by perturbations connected to the environment in which your product is used. This baby monitor uses low emission power, in order to protect the baby’s health. You are advised to use the “Vox” mode of your baby monitor a maximum: with this function, the receiver and transmitter do not communicate continuously in order to the amount of radiation emitted in the bedroom. When a baby cries, the system is activated immediately to alert parents; when the baby doesn’t cry, the transmitter and the receiver communicate only each 20 seconds to check good communication

FUNCTIONS

• Range 300 m in an open space.
• 2 channels to prevent interference and ensure optimum sound quality.
• Voice-activated transmitter (advised) or continuous transmission.
• The visual alarm on the receiver to be warned even when the volume is off.
• Volume control on the receiver.
• Low battery alarm on both the transmitter and the receiver.
• The transmitter and receiver run on batteries

WARNINGS

• The Baby Monitor Simply Care should not be seen as a medical device.
• In Addition to using Baby Monitor Simply Care, it is strongly recommended that an adult checks on your baby directly, regularly. Premature babies or children considered to be at risk should be monitored by your pediatrician or a health professional.
• Never go away from your baby outside the house, even a short moment.
• The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable;
• Use only power supplies listed in the user instructions.
• External power supply unit (Manufacturer: Shenzhen Wanyou Electronic CO., LTD.; Model name: M4-050100A1) ; Rating, Input: 100-240 V ~ 50/60 Hz, 0.3 A ; Output: 5V DC 1A.
• For optimum use of your baby phone, you are advised to use good quality AAA alkaline batteries.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the device before being charged.
• Different types of batteries: new and used batteries, or rechargeable and not rechargeable batteries, are not to be mixed.
• Rechargeable batteries are only to be charged under adult supervision.
• Batteries have to be inserted with the correct polarity (+/-).
• Exhausted batteries are to be removed from the device.
• The supply terminals are not to be short-circuited.
• The danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

PRECAUTIONS

• When not using the monitor for as long period, remove all batteries from the transmitter and receiver to avoid damage due to battery leakage.
• The baby monitor is best performed within a temperature range of 0 °C to + 45 °C.
• Do not leave the monitor exposed to strong sunlight for a long time or near any heat source, moisture or excessive dusty environment.
• Do not open the cabinet, no serviceable part inside
• Waste Electrical and Electronic Equipment should be disposed of by selective collection. Do not throw electrical and electronic equipment away with unsorted household waste, but dispose of it at a selective collection point.
  This marking indicates that this product should not be disposed of with other household wastes throughout the EU.

ACCESSORIES

• a. Transmitter unit
• b. Receiver unit
• c. User manual
• d. 5 V AC adapter x 2

CONTROLS LAYOUT

Transmitter

1. Power on / Battery low indicator

2. Power On-Off and VOX/continuous switch

3. Channel switch

4. Transmit indicator

5. Micro jack

6. Microphone
   Receiver

7. Power on / Battery low indicator

8. Speaker

9. Power On/Off and volume control

10. Channel switch

11. Visual LED alarm

12. Micro jack

POWER SUPPLY

1. Operation using batteries (not supplied)
   Slide open the battery cover of the transmitter and receiver. Insert four pieces of AAA-size (UM-3) alkaline batteries into the compartment. Observe correct polarities indication (+/-).

2. Operation using an AC adapter
   The unit can be operated on AC mains using the supplied 5 V AC adapter. Connect the adapter’s plug to the jack connector of the transmitter (5) or the receiver (12). Connect the adapter to the mains. The power supply from the battery will be cut off once the adapter’s output plug is inserted into the jack port.
   N.B.: The communication range is longer when the transmitter is operated on AC mains.

OPERATION

Transmitter

• Switch the transmitter on by setting button (2) to VOX (tripped on voice, recommended) or to ON (continuous operation). The power on indicator (1) will light up green.
• Select either channel 1 or 2 using the Channel Selector Switch (3) .
• Place the transmitter about 1 m from the cradle, directing the microphone (6) towards the baby.
• Under VOX mode, once the built-in microphone picks up any sound from the baby, the transmitter will automatically switch into transmit mode and the transmit indicator (4) lights up. When the baby stop making sound, the transmitter will return to standby mode and the transmit indicator goes off.
• Under ON (continuous transmission) mode, the transmitter will always transmit no matter whether the baby is making any sound or not. This is useful if you want to monitor the slightest sound of the baby. For conventional supervision, you are advised to use the “VOX” mode.
• The condition of the batteries is shown by the indicator (1). When the batteries are flat, the intensity fades and becomes red.

Receiver

• Set the power ON/OFF switch (9) to the ON position to turn on the unit. The power on indicator (7) will light up green.

• Select the same channel as the emitter using knob (10).

• Place the receiver at a reasonable distance away from the transmitter to avoid feedback. Too close a distance will create a screeching sound.

• Once the unit receives a signal from the transmitter, the LED of the visual level meter (11) lights up. The louder the baby’s voice, the more LEDs will be lit up. This feature is useful in case the parents prefer to turn down the speaker volume to keep the environment quiet while still being able to monitor the activity of the baby.

• The condition of the batteries is shown by the indicator (7). When the batteries are flat, the intensity fades and becomes red.
  N.B.: If you hear noises other than your baby’s, change to another channel both for the transmitter and receiver.

• For more convenience, the receiver can be carried around using the belt clip.

IN CASE OF PROBLEMS

position or place the transmitter further away from the baby.
A lot of static and interference.| • The transmitter is located close to other electrical apparatus.| • Remove the electrical appliances away from the source of interfe- rence or change the channel.
Too short communication range.| • A large number of steel structures between the transmitter and the receiver.

• The batteries have run out.

| • Reposition the transmitter and the receiver.

• Replace the batteries.

• Frequency: 863 MHz – 865 MHz
• Maximum output power: 7.418 dBm (ERP)
• Battery: 3 x AAA 1,5 V (transmitter) + 3 x AAA 1,5 V (receiver)

EU DECLARATION OF CONFORMITY

This declaration of conformity is used under the sole responsibility of the manufacturer. Babymoov Group
Parc Industriel des Gravanches – 16, rue Jacqueline Auriol 63051 Clermont Ferrand Cedex 2 – France
The object of the declaration described above conforms with the relevant Union harmonization legislation: Directive 2014/53/EU.

Declares that the following product:

• model: Simply Care
• reference: A014014 (model A014014) is compliant with the following relative harmonized standards:

EMC: ETSI EN 301 489-1 V2.2.3 (2019-11)
ETSI EN 301 489-9 V2.1.1 (2019-04)
EN 55032:2015/A11:2020
EN 55035:2017/A11:2020
Radio: ETSI EN 301 357 V2.1.1 (2017-06)
Health: EN 62479:2010
EN 50663:2017
Safety: EN 62368-1:2014+A11:2017
Name: M. Pierre Magro Date: 09/06/2022

Lifetime warranty. Register within 2 months. See conditions at babymoov.co.uk.

Babymoov Parc Industriel des Gravanches16, rue Jacqueline Auriol 63051 Clermont-Ferrand 2 – France
www.babymoov.com
Babymoov UK Ltd 3rd Floor, East Reach House East Reach Taunton – TA1 3EN – England
www.babymoov.co.uk
Designed and engineered by Babymoov in France

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>