BABYMOOV A035032 Moov and Comfy Instruction Manual
- May 15, 2024
- babymoov
Table of Contents
BABYMOOV A035032 Moov and Comfy
Product Information
Specifications
- Brand : Moov & Comfy
- Manufacturer : Babymoov
- Origin : France
- Product Components:
- Cot frame
- Crib
- Crib mattress
- Cot mattress
- Pockets for storage
- Zipper for playpen use
- Crib fastening zipper
- Folding buttons (4 buttons)
- Carry bag
Product Usage Instructions
Setup and Assembly
- Place the cot frame on a flat surface.
- Attach the crib securely to the frame.
- Insert the crib mattress and ensure it fits snugly.
- Secure the cot mattress in place using the provided fastenings.
- Adjust any pockets or storage compartments as needed.
Removing and Folding
- To remove the crib and mattress, press the release buttons simultaneously.
- Fold the cot by following the folding instructions provided.
- Store the folded cot in the carry bag for transport or storage.
FAQs
- Q: How do I ensure good adherence between the mattress and the cot?
- A: Please remove the squares of fabric from the hook and loop to ensure a secure fit between the mattress and the cot.
- Q: What is included in the product components?
- A : The product includes a cot frame, crib, crib mattress, cot mattress, storage pockets, zippers for playpen use, crib fastening zipper, folding buttons (4 buttons), and a carry bag.
- Q: How do I set up the crib?
- A: Place the cot frame on a flat surface, attach the crib securely, insert the crib mattress, and ensure a snug fit before use.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
WARNINGS
- COT USAGE WARNING
- Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the cot.
- Do not use the cot if any part is broken, torn or missing and use only spare parts approved by the manufacturer.
- Do not leave anything in the cot or place the cot close to another product, which could provide a foothold or present a danger of suffocation or strangulation, e.g strings, blind/curtain cords.
- Do not use more than one mattress in the cot.
- The cot is ready for use, only when the locking mechanisms are engaged. Check carefully that they are fully engaged before.
- All assembly fittings should always be tightened properly and that fittings should be checked regularly and retightened as necessary.
- Injury from falls: when the child is able to climb out of the cot, the cot shall no longer be used for that child.
- Only use the mattress sold with this cot, do not add a second mattress on this one, suffocation hazards.
- The lowest position is the safes.
- The base should should always be used in that position as soon as the baby is old enough to sit up.
- WARNING – Only use the mattress sold with this crib, do not add a second mattress on this one, suffocation hazards.
MATTRESS – EN 16890:2017+A1:2021
- Cot : the cot mattress provided is designed for a cot with internal dimensions of 118 x 78 cm.
- Crib : the mattress provided is designed for a crib with internal dimensions of 79,7 x 47,8 cm.
- Do not use the product if any parts are broken, misshapen or missing, and only use manufacturer-approved spare parts.
- WARNING – Do not use more than one mattress in the cot (crib and suspended bed).
- WARNING – Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the cot (crib and suspended bed).
PLAYPEN USAGE · EN 12227:2010
- WARNING – Do not position the playpen near a fireplace or any other source of heat.
- WARNING – Do not use the playpen without its base.
- WARNING – Ensure that the playpen is fully unfolded and that all the parts are properly locked into position before placing your child in this playpen.
- Maximum age of child: 3 years.
- Never leave anything in the playpen that a child could use to climb out or be a suffocation or strangling hazard.
- All the assembly parts must be correctly tightened.
- Do not use the playpen if any parts are broken, torn or missing, and only use manufacturer-approved spare parts.
- Accessories that are not approved by the manufacturer must not be used.
- The base should always be used in the lowest position as soon as the child is old enough to sit, kneel or to pull itself up
- The base should should always be used in that position as soon as the baby is old enough to sit up.
- a. Cot frame
- b. Crib
- c. Crib mattress
- d. Cot mattress
- e. Pockets
- f. Zip for playpen use
- g. Crib fastening zip
- h. Folding buttons (4 buttons)
- i. Carry bag
UNFOLDING THE COT
Please remove the squares of fabric from the hook and loop to ensure good adherence between the mattress and the cot.
SETTING UP THE CRIB
REMOVING THE CRIB AND MATTRESS
Press simultaneously the button and the two notches of the buckle to unlock it
FOLDING THE COT
SETTING UP THE PLAYPEN
COT CARE
LIFETIME WARRANTY
Lifetime warranty. Register within 2 months. See conditionsat babymoov.co.uk.
Babymoov
- Parc Industriel des Gravanches 16, rue Jacqueline Auriol 63051 Clermont-Ferrand 2 – France
- www.babymoov.com
- Babymoov UK Ltd 3rd Floor, East Reach House
East Reach
- Taunton – TA1 3EN – England
- www.babymoov.co.uk
Designed and engineered by Babymoov in France
References
- Babymoov® – Innovative Award-Winning Baby Products
- Babymoov® – Innovative Award-Winning Baby Products
- Babymoov® : Site OFFICIEL | Produits pour Bébé
- Lifetime Warranty Map | Babymoov®
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>