babymoov A001117 Nutribaby Processor of Food for Babies Baking in Steam Instructions

babymoon A001117 Nutribaby Processor of Food for Babies Baking in Steam

COMPONENTS

Steaming unit

1. Water tank
2. Heating unit
3. Cooking water vessel
4. Steaming basket (x 2 or x 3)
5. Removable cooking tray (x 2 or x 3)
6. team outlet
7.  Steamer lid

Control panel

1. Descaling alert

2. Water level alert

3. Time & quantity display

4. Temperature selection: room temperature / cold (for warming function only)
   All the parts in this product are certified free of BPA and PHTHALATES.

5. +/- Selection arrows

6. Blending function

7. Sterilizing function

8. Defrosting function

9. Baby food jar warming function 2.10. Baby bottle warming function 2.11. Steaming function

10. Validation “OK” function 2.13. Blending speed display

Blending unit

1. Removable blade
2. Blending jug
3. Blending lid
4. Blending switch
   All the parts in this product are certified free of BPA and PHTHALATES.

Starting the STEAMING, DEFROSTING, BABY BOTTLE HEATING, BABY FOOD JAR

HEATING AND STERILIZING functions

Before starting any function.

• Remove the cooking water vessel (1.3.) and fill the water tank (1.1.) up to the level of the heating unit (1.2.) (400 ml max.).
• Replace the cooking water vessel.
• Place the trays (1.5.) into the baskets (1.4.) depending on the required capacity.
• Position the lid (1.7.) so that the steam outlet (1.6.) is at the back.
• Turn on the appliance using the START / STOP button located on the top of the control interface.

STEAMING

• Place the trays (1.5.) in the basket (1.4.) as desired.
• Cut the ingredients into small cubes measuring approx. 1,5 cm x 1,5 cm and place them in the steaming baskets. Place no more than 400 g of food in each basket.
• The time will depend on the type and amount of food you wish to cook. Refer to the cooking-time table.
• f you wish to continue cooking, press the arrows to add minutes, then press OK to start.

Hints & tips

1. Ingredients can be separated by type (vegetable/meat), or cooking time. For example: place potatoes which require a relatively long cooking time in the bottom basket, and courgettes in the upper basket as they cook more quickly. No more overcooked vegetables!

2. Thanks to the removable trays, you can adjust the capacity: 1 small basket, 2 baskets, or 1 large basket by removing the middle tray.

3. Thanks to its nutritional value and its taste, the cooking water from rice or vegetables can be used to thin purées or added to formula milk in babies’ bottle.

4. The cooking times are for guidance only. Always check that food is thoroughly cooked before eating. If your food is not cooked enough, reset the time. You may need to add more water. It is possible to decrease or increase the cooking time while cooking.

5. Leave gaps between pieces of food to allow a good steam cooking.
   NUTRIBABY+ / NUTRIBABY+ XL • Instructions for use

6. Try to use organic ingredients and washed them well before use.

7. You can flavour your meals by adding herbs such as rosemary, thyme, etc. Place them in the cooking water vessel (1.3.) or straight into the baskets with the vegetables.

8. Cereals (oats, rice, etc.) can be cooked in the Nutribaby+ / XL. Place a small amount into the cooking water vessel (1.3.). Depending on the quantity and type of grain, you may need to add water to the cooking water vessel.

9. You can also cook eggs! Just place the eggs in the egg supports built into the trays.

10. We recommend you to read the “Care and cleaning” part to know how to clean your Nutribaby+ / XL and optimize its lifetime.

Nutribaby+ XL. Using 3 baskets

• When using 3 baskets, we recommend adding all 3 baskets at the same time, following the colour coding (see STEAM COOKING GUIDE). It is important to follow the colour-coded order. This guarantees your food is cooked in the best way.
• The cooking time for all 3 baskets is the longest cooking time, i.e. the cooking time for the bottom basket (see STEAM COOKING GUIDE).

DEFROSTING

• Remove the cooking water vessel (1.3.).
• Stack the baskets and position them on the base (1). Place the recipients (without the lid) straight onto the removable cooking tray (1.5.).
• To defrost, proceed in the same way as for cooking, but select defrost mode

Advice and tips

1. We recommend 15 mins for a 120 ml baby food jar and 25 mins for a 180 ml jar.
2. Defrosting times may vary if the product has just been used, or the temperature of the water in the tank differs from 20 °C!

BLENDING

• Check that the blending unit (3) is correctly connected to the main unit using the retractable connector.
• Place small pieces of cooked food into the blending jug.
• Depending on the required consistency, add some or all of the cooking water (200 ml max.) to the blending jug.
• Position and lock the lid (3.3.) onto the jug. Position and lock the jug onto the base.
• Press the blending switch (3.4.) on the lid for a maximum of 5 seconds. Wait another 5 seconds before repeating the process.

WARNING

• Do not hold down the button for more than five seconds at a time, to prevent the device from overheating.
• Failure to follow the blending instructions above may cause the product to stop working as a safety measure. the appliance stops, please:
  • let the product cool down for a few moments,
  • add water (at least 1/3 of the cooking water vessel) to restart the steaming process.

Note: the safety cut-off system only applies to certain models. To find out whether it applies to your product, check whether there is a sticker on the blending jug.

NB.:

• If the contents in the blending jug are at a high temperature and exceed the maximum level, there is a risk of scalding.
• Never start a blending cycle without liquid (cooking juice, water, milk, cream, etc.) Starchy foods such as potatoes must contain at least 25 % liquid, or add another vegetable to the mix.
• Fill the blending bowl to half way for smooth blending. Beyond this level, food will not be properly blended.
• If food sticks to the sides of the jug, move it into the centre of the blending jug using the spatula before blending again.

NUTRIBABY+ / NUTRIBABY+ XL • Instructions for use

• To perfectly adjust the texture of your soups or purées, 3 blending speeds are available. Press the blending icon to activate the blending mode, and increase or decrease the blending speed from 1 (the slowest) to 3 (the fastest).

Hints & tips

1. The blending function can always be selected no matter the chosen mode. For instance, it is possible to use the steaming function at the same time as the blending function.
2. To cancel the blending function, press the blending icon for 3 seconds.

REHEATING

•  Stack the baskets and place them on the base (1). Place the baby bottle without the teat directly onto the removable cooking tray (1.5.).

BABY BOTTLE HEATING

1. Select the bottle heating function .
2. Select the quantity of liquid to heat using the arrows and press OK. A beep sounds.
3. Select your current food temperature (room temperature or cold ) using the arrows and press OK.
4. Press OK. A beep sounds. The timerflashes. An alarm will sound to inform you that your bottle is ready!

BABY FOOD JAR HEATING

1. Select the food jar heating function.
2. Select the quantity of food to heat using the arrows and press OK. A beep sounds.
3. Select your current food temperature (room temperature or cold ) using the arrows and press OK.
4. Press OK. A beep sounds. The timer flashes. An alarm will sound to inform you that your jar is ready!

NUTRIBABY+ / NUTRIBABY+ XL • Instructions for use

CAUTION:

1. To prevent risk of burns, always check the temperature of the food before feeding your baby. Shake baby bottles well to mix, then pour a drop of milk on the inside of your wrist to check the temperature.
2. The pre-programmed cycles are based on the average heating time of a baby bottle or baby food jar. The size and thickness of the baby food jar may affect the temperature of the food. If the food is too hot or too cold, reduce or increase the heating time using the ‘steam’ function.
3. The size, material and thickness of the baby food jar or bottle and whether or not it has a removable bottom may affect the temperature of the food.
4. Heating more than one bottle at once may also affect the reheating time. If the food is too hot or too cold, reduce or increase the heating time using the ‘steam’ function.

The suggested time for the Nutribaby+ / XL to heat baby bottles and baby food jars no longer applies in the following conditions:

• Temperature of water/milk or baby food jar:
  • below 4°C – refrigerator temperature,
  • above 20°C – room temperature.
• Temperature of water in the tank above 20°C.
• Nutribaby+ / XL already in use: if the product is already in use, stop it, remove the water from the tank and wait 15 minutes before turning it back on.

STERILIZING

• Remove the cooking water vessel (1.3.).
• Stack the baskets and place them on the base (1).
• Place the baby bottles upside down and any accessories you wish to sterilize directly onto the removable cooking tray (1.5.).
• Place the lid (1.7.) on the upper basket.

N.B.: we recommend you to read the “Care and precautions for use” part to know how to clean your Nutribaby+ / XL and optimize its lifetime.

CARE AND CLEANING

ALARMS

• An alarm will sound and the icon will light up on the control panel if the tank runs out of water during the cooking cycle. Remove  the steamer baskets and add water in the water tank (1.1.).
  Press OK to turn off the alarm, then press OK again to restart the timer.

• An alarm will sound at the end of the cycle to notify you that cooking is complete.
  CLEANING
  CAUTION: Unplug Nutribaby+ / XL and ensure it is cool before cleaning! The bases of the steamer and blender must not be washed in a dishwasher.

• Wipe off the heating unit inside the tank, and the base of the blending unit with a damp cloth or sponge. Do not use detergents or cleaners. Allow to dry. Do not wash Nutribaby+ / XL under running water. Do not allow water to enter parts containing electrical components.

• Do not use abrasive or scouring cleansers for cleaning as they may damage the apparatus and its surface.
  The cooking baskets (1.4.), removable trays (1.5.), cooking water vessel (1.3.), lids (1.7.) and (3.3.), spatula and blending jug (3.2.) may be washed using a sponge, hot water and washing liquid. Rinse well and allow to dry. These elements are also dishwasher safe.

• To clean the blade (3.1.), simply unscrew it clockwise from beneath the jug.

DESCALING
When the Nutribaby+ / XL has been used for a certain period of time, mineral deposits may form on the heating unit and damage it. Thus, the icon (2.1.) will be displayed on the control panel. You should descale the water tank regularly (every 50 cycles), pouring 100 ml of hot water and 100 ml of white vinegar. Let it sit for one or two hours (or more if necessary), without plugging in the apparatus. Pour off the mixture and wipe of inside of the tank and the heating unit with a wet cloth. Once the operation is completed, hold down OK for 5 seconds to make the icon (2.1.) disappear. Limescale may also be removed using limescale removers designed for food products (citric acid based).
N.B.: 50 cycles is an average estimate. Descaling may need to be carried out more often if the water used has a high mineral content (“hard water”).

blending unit by placing it on top.
The blades are not turning.| Contact the after-sales service. We may need to exchange your blending unit.
The blending jug lid is not positioned correctly.| Check whether the lid is positioned correctly on the blending jug. If the lid is positioned correctly but blending will still not start, please contact our customer service department.
The       symbol is lit up| The       symbol lights up automatically after 50 heating cycles.| Press the OK button for 5 seconds. If the ymbol stays on, you will need to RESET.

To reset, press the 2 arrows and the ON/OFF button at the same time.

The    symbol is lit up| The steaming unit has run out of water.| Press the OK button for 5 seconds and add water. If the    symbol stays on, you will need to RESET.

To reset, press the 2 arrows and the ON/OFF button at the same time.

The product stops before finishing the cooking, sterilising or heating cycle| Limescale build-up.| See the ‘CARE AND CLEANING’ section in the instruction manual for how to descale the product using water and vinegar.
The blending unit has suddenly stopped| The fuse or heat protection is activated (this applies to most models).| Let the product cool down for a few moments. Add liquid to the blending jug and blend again. If the product still does not work after that, please contact our after-sales service.

References

• Babymoov® – Innovative Award-Winning Baby Products
• Babymoov® : Site OFFICIEL | Produits pour Bébé
• Babymoov® : Site OFFICIEL | Produits pour Bébé
• Lifetime Warranty Map | Babymoov®

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>