babymoov A014426 Plus 5 Inches YOO Master Instructions

A014426 Plus 5 Inches YOO Master
Instructions YOO Master Plus 5″
Réf. : A014426

A014426 Plus 5 Inches YOO Master

Babymoov
Parc Industriel des Gravanches
16, rue Jacqueline Auriol
63051 Clermont-Ferrand 2 – France
www.babymoov.com
Babymoov UK Ltd
3rd Floor, East Reach House
East Reach
Taunton – TA1 3EN – England
www.babymoov.co.uk
Designed and engineered by Babymoov in France

Thank you for choosing our YOO Master Plus 5˝ baby monitor. Please read these instructions carefully to learn how to use your appliance properly and guarantee long-lasting use. If you notice a defect or any problem whatsoever, please contact our consumer department.

MAIN FUNCTIONS

• 2.4 GHz digital FHSS technology.
• Range of 300 m in an open space. The ranges stated on the pack are measured in free-field. It is therefore necessary to divide the range by 3 to obtain an estimated range in realworld conditions (presence of walls, etc.).
• 5″ Colour screen.
• Motor-controlled camera: pan and tilt the camera remotely from your receiver.
• On-screen display of the temperature in your baby’s room.
• Automatic night vision for better visibility in the dark.
• Remote control of the camera to see your baby as they sleep.
• Walkie-talkie function for talking to baby.
• Zoom function (x2).
• Battery level indicator.
• Lullaby function (8 melodies)
• VOX function (3 different sensitivity levels: High/Low/Night).
• Out-of-range and low battery alarms.
• The receiver is fitted with a rechargeable Lithium battery.

WARNING
– KEEP THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
– The Yoo-Master Plus 5″ baby monitor should not be considered to be a medical device. In addition to using the Yoo-Master Plus 5″ baby monitor, it is strongly recommended to have an adult regularly check on your baby in person.
– Premature babies or children considered at risk must be supervised by your paediatrician or other medical staff.
– Never leave your child alone in the house, even for a short time.
– Keep out of reach of children.
– Do not use the Yoo-Master Plus 5″ baby monitor next to a source of water (bathwater, sink etc.).
– The appliance must not be exposed to drips or splashes, and no items containing liquids, such as vases, must be placed on top of the device.
– Always use the receiver battery supplied by the manufacturer: if the battery is damaged, contact our after-sales service department.
– For optimal use of your Yoo-Master Plus 5″ baby monitor and to limit any interference, we recommend not connecting any other electrical appliances to the same socket as your Yoo-Master Plus 5″ baby monitor (don’t use a multi- socket adapter).
– Risk of explosion if the battery is not correctly replaced. Replace only with the same battery, or a type of battery equivalent to the one provided by the manufacturer.
– The batteries (battery compartment or installed batteries) must not be exposed to excessive heat such as direct sunlight, fire or any other heat source.
– The adapters or sockets (USB port) must be accessible and easy to disconnect in the event of any danger.
– This equipment should be installed and operated with a minimum distance of 20 cm bewteen the radiator and your body.
– This appliance must be installed by an adult only.
– This appliance is not a toy. Never allow children to play with it.
– Never place the camera or cables in the crib or within baby’s reach.
– Keep the cables out of reach of children.
– Do not use the product if any components are broken or missing.
DO NOT EXPOSE THE BATTERY TO HEAT OR WATER, DO NOT PIERCE OR ATTEMPT TO DISMANTLE THE BATTERY:
RISK OF EXPLOSION.

PRECAUTIONS

• Only use the USB cable supplied. The use of other USB cable is liable to damage the baby monitor.
• When the baby monitor is not in use for an extended period, remove the battery from the receiver to avoid any damage associated with a battery leak.
• Unplug the power adapter from the wall socket if you are not using the baby monitor.
• The baby monitor works better in temperatures ranging between 0 °C and 40 °C.
• Never expose the baby monitor to direct sunlight for long periods, and never place it next to a heat source or in a damp or very dusty room.
• Do not dismantle the appliance: it does not contain any parts that may be used independently.
• Electrical and electronic equipment must be collected separately from household waste. Do not discard electrical and electronic appliances with non-separated municipal waste.
• This symbol indicates that, throughout the European Union, this product must not be thrown away or mixed with household waste but must be collected separately.
• Note: dropping or striking the product, or using it in any way that does not comply with the manufacturer’s recommendations, may damage it and invalidate the guarantee.

YOO MASTER PLUS 5″

STANDARD ACCESSORIES

a. Camera
b. Receiver
c. 1600 mAh rechargeable Lithium-Polymer batteryd. USB-Jack cables
e. USB-C cables
f. Quick start guide   

TROUBLESHOOTING TABLE

low.
•The power adapter is not property connected to the transmitter.
•VOX mode active.
•Battery empty.| •Increase the receiver volum.
•Check the connection.
•Press a button to activate the screen.
•Charge your receiver.
Continuous transmission| •The VOX mode sensitivity is too hig.| •Reduce the sensitivity of the VOX mode.
Out-of-range alarm permanently activated| •The distance between the camera and the receiver exceeds the range.| •Move the receiver and camera closer together.
The image on the screen is breaking up
The ‘signal loss’ image is displayed| •The range limits have been reached.
•The transmitter or camera is placed next to other electrical appliances.| •Move the receiver and camera closer together.
•Move away any nearby electrical appliances or move the camera away from any source of interference.
The image on the screen freezes or appears in black and white| •The light intensity in baby’s bedroom is too low, night vision mode is activated.| •Increase the brightness level in baby’s bedroom if you want to switch back to daytime mode.
Range too small| •Walls/partition walls too thick between the camera and receiver.| •Move the camera and receiver.

• Frequency: 2410 MHz ~ 2473 MHz
• Maximum output pow. Camera: 18.36 dBm (EIRP) Receiver: 12.7 dBm (EIRP)
• Nominal output values: 5 V – 1 000 mA
• Battery: Li-Ion Polymer 3,7 V / 2100 mAh

Camera Receiver

CONTROLS

Camera

1. Speaker

2. ON/OFF and pairing button

3. Jack port and power socket

4. Light detector

5. Motorized base
   Receiver

6. ON/OFF button

7. Reply to baby’ button

8. Menu’ button

9. Arrow buttons to pan and tilt the camera

10. LED (turned on and charging)

11. 5″ colour screen

12. Speaker

13. Lithium battery compartment

14. USB-C power port

15. Base stabilizer

SETTING UP THE APPLIANCE

Place the camera on a flat surface between 1 m and 2.50 m from baby’s head. Point the camera lens and microphone towards the baby.
POWER SUPPLY

Camera Receiver
The 1600 mAh rechargeable Li battery is already installed in the receiver.
N.B.: before using the receiver for the first time, charge the battery for at least 3 hours.

BATTERY STATUS AND CHANGING THE BATTERY

Flashing green:
battery recharging, receiver turned on.
Flashing green:
battery recharging, receiver turned on.
Flashing Red/Orange:
battery charging, receiver turned off.
Red:
low battery level, receiver turned on.
Changing the battery
If required or if you need to perform a reboot, unplug the USB cable.
N.B. Remember to disconnect the power adapter once the battery is completely recharged. To extend battery life and make it last longer, do not leave the battery fully flat for long periods of time.
WARNING: ONLY USE THE ORIGINAL BATTERY OR ONE SUPPLIED BY THE DEALER. KEEP THE BATTERY OUT OF REACH OF CHILDREN.

STARTING THE APPLIANCE

PAIRING

Connection between the camera and the receiver
The baby monitor is paired by default and ready to use once turned on. If the camera and receiver do not communicate for whatever reason, you can pair them as follows. N.B.: you can only connect YOO Master cameras to the receiver.

Add an additional camera To complete the connection, repeat the pairing method
(Connection between the camera and receiver section).

RECEIVER OPERATION

WARNING: the camera turns 360 degrees. It makes a complete revolution and then stops automatically (a safety stop protects the motorization system). To turn the camera
in the other direction, use the arrows.

| ON/OFF button:
– press and hold to turn on/off.
– press and release to select audio mode. Audio
mode will extend the receiver’s battery life.
---|---
| ‘Menu’ button:
– access the main menu,
– press the button to confirm,
– press the ‘Menu’ button once again to exitthe menu.
| Pan and tilt arrow buttons:
use the arrow buttons on the receiver to navigate.
| ‘Reply to baby’ button:
exit the menu and press while talking  to baby.

RECEIVER MAIN MENU

| Continuous mode : both units communicate permanently.
---|---
| “SLEEP” Technology: ensures no waves are emitted whilst baby sleeps, and the baby monitor is activated only if baby cries.
| High VOX sensitivity, the parent unit is activated when your baby makes the slightest noise.
| Low VOX sensitivity, the parent unit is activated when your baby makes a loud noise.

EU DECLARATION OF CONFORMITY

This declaration of conformity is used under the sole responsibility of the manufacturer.
Babymoov Group
Parc Industriel des Gravanches – 16, rue Jacqueline Auriol
63051 Clermont Ferrand cedex 2 – France
The object of the declaration described above is in conformity with the relevant Union harmonization legislation : Directive 2014/53/EU.
Declares that the following product:
∙ model: YOO Master Plus 5″
∙ reference: A014426 is compliant with the following relative harmonized standards:
EMC:
EN 55032:2015+A11:2020+A1:2020
EN 55035:2017+A11:2020
EN IEC 61000-3-2:2019+A1 :2021
EN IEC 61000-3-3:2013+A2 :2021
Radio:
EN 301 489-1 V2.2.3 (2019-11)
EN 301 489-17 V3.2.4 (2020-09)
EN 300 328 V2.2.2 (2019-07)
Health:
EN 62479:2010
EN 50663:2017
Safety:
EN 62368-1:2014+A11:2017
Name: M. Pierre Magro

Date: 09/11/2022
Designed and engineeredby Babymoov in France

Babymoov
Parc Industriel des Gravanches
16, rue Jacqueline Auriol
63051 Clermont-Ferrand 2 – France
www.babymoov.com| Babymoov UK Ltd
3rd Floor, East Reach House
East Reach
Taunton – TA1 3EN – England
www.babymoov.co.uk
---|---

References

• Babymoov® – Innovative Award-Winning Baby Products
• Babymoov® – Innovative Award-Winning Baby Products
• Babymoov® : Site OFFICIEL | Produits pour Bébé
• Lifetime Warranty Map | Babymoov®

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>