VEVOR W2640 Series Wall Mount Network Server Cabinet User Manual
- June 14, 2024
- VEVOR
Table of Contents
VEVOR W2640 Series Wall Mount Network Server Cabinet
Product Information
The Wall Mount Server Enclosure is a high-quality cabinet designed to securely mount and protect server equipment. It is manufactured by VEVOR, a reputable company committed to providing tools at competitive prices. The enclosure is designed to save you money compared to top major brands while still offering reliable performance. Please note that the savings estimate does not apply to all categories of tools offered by VEVOR, so it is important to verify carefully before placing an order.
This manual applies to the following SKUs:
- W26406
- W26409
- W26412
- W36412
If you need any assistance or have product questions, please feel free to contact VEVOR’s customer service at CustomerService@vevor.com.
We continue to be committed to providing you tools with at competitive prices. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and do not necessarily mean covering all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Thank you for purchasing the Performance Series Wall Mount Cabinet from VEVOR. Every effort has been made to ensure the accuracy of the information in this product manual.
IMPORTANT SAFETY INSTRUCTIONS
- Keep the enclosure free from moisture, extremes of temperature, combustible substances and gases, conductive pollutants, dust, and direct sunlight in a controlled indoor environment.
- Allow sufficient room for appropriate ventilation at the front and back of the enclosure.
- The enclosure’s external ventilation openings must not be blocked, covered, or inserted with items.
- Please call or email us if you have any concerns about the installation or use of your product.
- Please inspect the product for any missing or defective components.
- Ask VEVOR for help if any component is broken or missing.
- If the product has been affected, do not try to install or use it.
- To prevent harm during assembly, place the product contents on cardboard or another safe surface.
- Improper installation or use of this product can result in product damage, other damage to equipment, or personal injury.
- It is advised that the installation be performed by a professional installer.
- VEVOR cannot be held liable for equipment damage or physical injuries resulting from inappropriate product usage or installation.
- Please ensure that the equipment stored/mounted does not exceed the stated weight capacity.
- Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols.
- This manual may refer to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to VEVOR.
- These references are provided for informational purposes only and do not represent an endorsement of a product or service by VEVOR, or an endorsement of the product(s) to which this manual applies by the third-party company in question.
- Regardless of any direct acknowledgment elsewhere in the body of this document, VEVOR hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related document are the property of their respective holders.
- Limitations of Liability: VEVOR will not be responsible for any injury or damage, whether direct or indirect, special, punitive, incidental, or consequential damages (including, but not limited to, lost profits or revenue, loss of use, lost business opportunities, or loss of goodwill) , or the costs of procuring substitute products, arising out of or in connection with the use of the product. In no case can the seller’s gross accumulated liability, arising from all causes of action and theories of liability, exceed the total sums charged by the customer to the seller under the order giving rise to any liability hereunder.
PARTS IDENTIFICATION
- Top Panel x1
- Bottom Panel x1
- Front Door x1
- Side Panels x2
- Left Frame x1
- Right Frame x1
- Rear panel x1
- Rear Suspension x1
- Vertical Mounting Rails x4
- Pallet x1
- A: M5 Screws x40
- B: M6 Hex Head Screws x15
- C: M6 Cage Nuts x15
- D: Side Panel Latches x4
- E: Side Panel Lock Kitx2 x2
- F: Front Door Lock Kit x1
- G: M10 Expansion screws x4
- H: hex brass nut for screw bolt x1
- I: expansion bolts x4
ENCLOSURE INSTALLATION
-
Insert the Left Frame (#5) and the Right Frame (#6) into the Bottom Panel (#2), Secure with M5 Screws (A).
-
Place the Top Panel (#1) onto the Left Frame (#5) and the Right Frame (#6). Secure with M5 Screws(A).
-
Install the 4 Vertical Mounting Rails (#9) into place at the desired depth using M5 Screws(A)for each Vertical Mounting Rails (#9).
Note: Please consider the equipment you plan to install within the enclosure while deciding the appropriate mounting depth. Make sure the rail depth on both sides of the cabinet is the same.
-
Install the Pallet (#10) into place at the desired height, Secure with M6 Hex Head Screws (B) and M6 Cage Nuts (C).
-
Install the Side Panel Latches ( D) and the Side Panel Lock Kit ( E) on the two Side Panels (#4).
-
Install the two Side Panels (#4) into place using the Side Panel Latches(E). Once each Side Panel (#4) is in place, check to see whether the Side Panel Lock locks properly.
-
Install the Front Door Lock (F) on the Front Door (#3).
-
Position the Front Door (#3) so that the top and bottom pins are aligned with the hinge hole located in the enclosure. Insert the bottom fixed pin into the bottom hinge hole. Pull the top spring pin down into the hole in the top corner and release it.
-
Install the Rear panel ( #7) and the Rear suspension (#8), Secure with M5 Screws(A).
WALL MOUNTING THE ENCLOSURE
- Attach the rack to a wall or other suitable mounting surface using M10 Expansion screws(G). The mounting hole distance is shown in Fig, apart to accommodate standard stud placement as reflected in the diagram.
Warning: Do not attempt to mount to the wall when equipment is mounted inside the enclosure. The enclosure has a weight capacity of 100 pounds. Make sure the type of wall structure and mounting hardware that you are using will properly support the weight of the enclosure and equipment. For safety, two people to install.
PRODUCT PARAMETER
Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to USA: VEVOR STORE INC, 9448 RINCHMOND PL #E RANCHO CUCAMONGA,
California, 91730 United States of America
Technical Support and E-Warranty Certificate www.vevor.com/support
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact
us: CustomerService@vevor.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>