PNI PT82C SafeHome Wireless Smart Relay User Manual

PNI PT82C SafeHome Wireless Smart Relay User Manual

Product description

Installation instructions

1. Before installing the relay, disconnect the general power supply.

2. Connect the wires according to the diagram above.

3. Restart the power.
   Tuya Smart APP
   Download the Tuya Smart app by accessing Google Play or the App Store or scan the QR codes below:
   
   
   Android
   
   iOS
   Add device in Tuya Smart APP

4. Open the application, create an account and log in.

5. Add your device by clicking the + icon in the upper right corner of the screen or by clicking the Add device button (this button only appears when you do not have any devices added to the application).

6. Select the Electrician option on the left side of the screen.

7. From the list of devices on the right side of the screen, select Breaker (Wi-Fi).

8. Select the WiFi network you want to connect to and add the password.

9. In the next interface, in the upper right corner, select the EZ Mode option.

10. Reset the relay by long pressing the pairing button. The device is now in pairing mode.

11. Check the Confirm indicator rapidly blinks option and click Next.

12. The application will scan nearby devices. After identifying your device, you will receive the Added successfully confirmation.

13. To finish, click the Done button.

Device control in the application

The Tuya Smart application allows remote control of the relay.

Options:

• On/Off
• Timer
• Countdown

Safety warnings

• Make sure that the total power of the connected electrical devices does not exceed the maximum power supported by the relay (2200W for 230V).
• The installation of the relay must be done only by specialized electricians respecting the local norms.
• Take all safety precautions when installing the relay.
• Protect the relay from moisture and excessive heat. Risk of short circuit.
• Install the relay away from sources of interference (eg microwave oven) that could affect its operation.
• Do not attempt to repair the relay by yourself.

Technical specifications

• Rated voltage: 220-240V AC, 50-60Hz
• Rated current: 2x5A
• Maximum load: 2x1150W / 2x150W (for LED bulb)
• WiFi frequency: 2.4GHz
• Operating temperature: -10ºC ~ + 40ºC
• Dimensions: 46x46x18mm

EU Simplified Declaration of Conformity
SC ONLINESHOP SRL declares that Smart relay PNI SafeHome PT82C complies with the Directive EMC 2014/30/EU and RED 2014/53/UE. The full text of the EU declaration of conformity is available at the following Internet address:

https://www.mypni.eu/products/7247/download/certifications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>