WARRKY H03 4K 60Hz HDMI Switch User Guide
- June 14, 2024
- WARRKY
Table of Contents
WARRKY H03 4K 60Hz HDMI Switch
Please feel free to contact W ARRKY for help. You will get a response promptly within 18 hours.
Features & Specification
- Support up to 4K@60Hz (HDMI 2.0 or above), backward compatible with 4K@30Hz, 2K@144Hz, 2K@120Hz, 1080P @240Hz, etc ..
- Support DTS-HD / Dobly-True / HD/ LPCM / DTS / Dobly AC3 / DSD / HD(HBR).
- Compliant with HDCP 2.2, HDR, 3D vision.
- Power free, plug and play. No extra driver and power supply needed.
Connection Diagram
Mode 1 (Switch between sources)
- Plug the fixed HDMI cable into your display.
- With HDMI cables, connect two female HDMI ends to your sources.
- Press the button to select which source device you want to use with the display.
Mode 2 (Switch between displays)
- Plug the fixed HDMI cable into your source.
- With HDMI cables, connect two female HDMI ends to your displays.
- Press the button to select which display device you want to use. (ONLY one display would show content)
Notice
- a. In Mode 2 (switch between displays), this dongle can not support display on two screens both. ONLY one display would show content.
- b. For female HDMI ends, it can support long-distance transmission of 2M at 4K@60Hz and SM at 4K@30Hz.
- c. Cannot work with the soundbar since it can not extract audio. Do not support ARC function.
Troubleshooting
Flicker/Cut-Off/Not Working
- a. Change to other HDMI cables (HDMI 2.0 or above is recommended) or change to other HDMI ports on your displays/sources, and see if there is any difference.
- b. Please wipe the plug with dry pads and make sure all connections are tight.
- c. Wake up your connected sources or get your sources powered. Since this switch gets power from the sources, some sources cannot put out enough power individually in some cases (like sleeping mode and power save mode).
- d. Turn down your resolution to 2K or 1080P. When your sources output 4K content but your display is not capable of 4K, display issues may happen.
- e. Some displays with multiple HDMI ports do not detect and switch to the correct input automatically, please manually adjust it.
Display issues on PlayStation/Xbox
- a. If your PS4 Pro runs 4K/60Hz, please LOWER the resolution from 2160P-RGB to 2160P-YUV420, or to 1080P. For Xbox One/Series, please lower to 3840×2160@25hz.
- b. Please try the solutions of ‘Troubleshooting 1: Flicker/ Cut-Off/Not Working’ . If they do not work, contact us and we would help you to solve it hand in hand.
Cannot Get 4K
- a. Please check the distance of transmission is less than 2M at 4K@60Hz, and SM at 4K@30Hz.
- b. Please confirm your HDMI cable, host devices and displays are capable of 4K resolution.
Cannot Show on Two Displays Simultaneously
Please note this switch can only support single display in Mode 2 (switch between displays) and cannot split content into two displays. If this product cannot cover your need, please contact us first and we would give you a satisfactory solution.
Customer Support
a. More questions, welcome to contact us
– support@warrky.com
– “Ask a question” on Amazon seller page
– www.warrky.com >>> SUPPORT You will get fast and
friendly support within 18hrs even during weekends and holidays.
b. Activate life-time unconditional warranty via
www.warrky.com »> WARRANTY
c. For any suggestions or collaboration proposals,
welcome to leave your ideas via
official@warrky.com.
The Way Connects Your Life.
support@warrky.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>