bcp SKY6581 Mobile Dining Table Instruction Manual
- June 12, 2024
- bcp
Table of Contents
bcp SKY6581 Mobile Dining Table
Please retain these instructions for future reference.
- Please do not exceed the weight limitations of this item.
- Do not stand on or use any part of this item as a step ladder.
- Firmly secure all bolts, screws, and knobs before use.
- Reconfirm that all bolts, screws, and knobs are secure every 90 days.
- Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
- If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or factory replacement parts are installed.
- Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the product warranty.
- This product is intended for residential use only.
Tools Required
-
PHILLIPS SCREWDRIVER
-
ELECTRIC DRILL (RECOMMENDED)
-
SAMMY (RECOMMENDED)
HARDWARE
TIGHTENING CAMLOCKS
-
Screw cam bolt in completely.
-
Insert cam bolt and cam lock into designated holes.
-
Screw cam lock clockwise to secure cam bolt.
Parts
PRODUCT ASSEMBLY
-
Insert seven part A cam bolts each into the part 4 table back panel and the part 5 table front
panel, fourteen bolts total.
Attach the part I handle to the part 5 table front panel with two part J screws.
-
Locate two part 6 fixed side panels and insert four part A cam bolts into each panel, eight bolts total.
-
Insert four part C dowels each into the part 7 top shelf and part 8 bottom shelf , eight dowels total. Attach the part 7 & 8 shelves to one part 6 fixed panel.
-
Attach the part 6 fixed panels , then insert four part B cam locks into each shelf panel, eight locks total, then turn to secure.
-
Place the assembly on its side, then Insert six part C dowels into the part 4 back panel, then attach to the part 6, 7, and 8 panels.
Insert two part B cam locks into the part 8 bottom shelf , twist to secure.
Insert two part B cam locks into the part 7 top shelf, twist to secure.
-
Place the assembly on its back (part 4 panel), then insert six part C dowels into the part 5 front panel, then attach to the part 6, 7, and 8 panels.
Insert two par t B cam locks into the part 8 bottom shelf , twist to secure.
Insert two part B cam locks into the part 7 top shelf, twist to secure.
-
Flip the assembly so the bottom of the part 8 shelf is facing upward.
Attach two part G caster sets to the bottom of the part 8 shelf with sixteen part K screws , four screws per caster.
NOTE: Arrange the casters in the four corners of the panel so that the locking and non-locking casters are on opposite angles.
-
Attach two part N hinges to the part 10 right side door with six part D screws , three screws per hinge.
Attach two part N hinges to the part 11 left side door with six part D screws, three Screws per hinge.
-
Insert two part A cam bolts and four part C dowels into the part 14 cubby back.
Insert two part B cam locks into two part 12 cubby sides , four locks total.
Attach the part 12 cubby sides to the part 14 cubby back then turn the locks to secure.
-
Secure the part 14 cubby back to the part 11 left side door with four part O screws , then attach the part 15 cubby bottom with two part C dowels.
Insert two part A cam bolts into the part 13 cubby front, then attach to the part 15 cubby bottom , and part 12 cubby sides with six part C dowels , two dowels per panel. Turn the locks to secure
Attach one part L table joiner to the part 10 and 11 side doors with eight part D screws , four screws per joiner.
-
Attach the part 10 right side door by securing the open hinges to the part 6 fixed panel with six part D screws.
Attach two part M table top fasteners (female) to the part 4 back panel with four part D screws.
-
Attach the part 11 left side door by securing the open hinges to the part 6 fixed panel with six **part D screws.
**
-
Attach two part M table top fasteners (male) to the part 2 & 3 table extensions with four part D screws.
-
Insert eight part A cam bolts into the bottom of the part 1 main table , then attach six part N hinges with eighteen part D screws.
Secure the part 2 & 3 table extensions by securing them to the open hinges attached to the part 1 main table with eighteen part D screws.
-
Open the part 10 & 11 doors, then attach two part H door casters with four part E bolts and four part F nut per caster.
-
Insert two part B cam locks into each part 6 fixed side panel , four locks total.
Insert two part B cam locks in the part 5 front , and the part 4 back panel, four locks total.
Attach the table top assembly with eight part C dowels, then secure by turning the cam locks.
NOTE: We recommend a second person lowers the table top assembly while the other checks the alignment.
-
Insert four part P shelf supports into the part 4 & 5 front and back panels.
Place the part 9 middle shelf onto the supports.
Open the part 2 & 3 side panels and secure them with the part L table joiners.
HELP CENTER
Question about your product? We’re here to help. Visit us at: help.bestchoiceproducts.com
|
|
|
|
---|---|---|---|---
Chat Support
| Product Inquiry| orders FAQ| Product Assembly|
Returns and Refunds
PRODUCT WARRANTY INFORMATION
All items can be returned for any reason within 60 days of the receipt and will receive a full refund as long as the item is returned in its original product packaging and all accessories from its original shipment are included. All returned items will receive a full refund back to the original payment method. All returned items will not be charged a re-stocking fee.
All returned items require an RA (Return Authorization) number, which can only be provided by a Best Choice Products Customer Service Representative when the return request is submitted. Items received without an RA may not be accepted or may increase your return processing time. Once an item has been received by Best Choice Products, refunds or replacements will be processed within 5 business days.
All returns must be shipped back to the Best Choice Products Return Center at the customer’s expense. If the reason for return is a result of an error by Best Choice Products then Best Choice Products will provide a pre-paid shipping label via email. Boxes for return shipping will not be provided by Best Choice Products, and is the customer’s responsibility to either use the original shipping boxes or purchase new boxes.
Pictures may be required for some returns to ensure an item is not damaged prior to its return. Items returned are not considered undamaged until they are received by Best Choice Products and verified as such. All damages to items are the customer’s responsibility until the item has been received by and acknowledge by Best Choice Products as undamaged.
WARNING
Manufacturer and seller expressly disclaim any and all liability for personal injury, property damage or loss, whether direct, indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, unapproved modification, or neglect of this product.