aap PW WIEGAND Proximity Reader Instructions
- June 9, 2024
- AAP
Table of Contents
aap PW WIEGAND Proximity Reader
Introduction
The PW Wiegand is a slim Wiegand Output keypad with proximity reader, compatible with 125KHz EM format card. The keypad is fully potted, and can function at extreme temperatures (-40℃ ~60℃), which allows it is capable to be mounted either indoor or outdoor.
Specifications
| Operation Voltage | 9~24V DC |
|---|---|
| Standby Current | ≤50mA |
| Frequency | 125KHz |
| Card Type | EM card |
| Read Range | Up to 2.8 inches (7cm) |
| Output Format | AAP Custom 40-bit |
| Operating Temperature | -40℃~60℃ |
| Operating Humidity | 10% to 95% RH |
| Color | Black |
| Index of Protection | IP66 |
| Dimension(H x W x T) | 103 x 48 x 20mm |
| Net Weight | 100g |
| Shipment Weight | 150g |
Special Backlight Feature
The PW Wiegand device has the ability to automatically turn off its backlight after 20 seconds if no keys are pressed. To turn this feature Off press and hold the # key for 10 seconds. (the green led will flash to confirm) To turn this feature On press and hold the # key for 10 seconds. (the green LED will flash 4 times)
Wiring
| Color | Function | Notes |
|---|---|---|
| Red | Power | +DC (9-24V DC) |
| Black | GND | Ground |
| Green | D0 | Data 0 |
| White | D1 | Data 1 |
| Blue | LED1 | Red LED Light Control |
| Brown | LED2 | Green LED Light Control |
| Yellow | Buzzer | Buzzer Control |
Function Table sheet
Read Card
| The LED light will be turn into Green, and the buzzer sounds a beep, at the
meantime, the reader outputs the Wiegand signal
---|---
External LED Control| When the input voltage for LED is low, the LED will turn
into Green or Red
External Buzzer Control| When the input voltage for Buzzer is low, the Buzzer
will sound
Wiegand Data Output| This device has locked down software to allow it to com-
municate with the Wiegand-IF2
ARROWHEAD ALARM PRODUCTS Ltd.
1A Emirali Road, Silverdale 0932, Auckland, NZ Ph. 09 414 0085 www.aap.co.nz