AXIS P3265-LVE 22 mm Dome Camera Instruction Manual

P3265-LVE 22 mm Dome Camera
Instruction Manual

P3265-LVE 22 mm Dome Camera

AXIS P32 and AXIS M32 Dome Camera Series
AXIS P3265-LVE 22 mm Dome Camera
AXIS P3267-LVE Dome Camera
AXIS P3268-LVE Dome Camera
AXIS M3215-LVE Dome Camera
AXIS M3216-LVE Dome Camera
Impact on warranty
This product is approved for repaint by Axis, provided that you follow the instructions in this document and at axis.com/warranty-implication-when- repainting.
Risks with repainting
There are several risks when disassembling or assembling an Axis product. There is always a certain yield loss during assembly. Training of operators and the use of correct tools mediates some of the problems but they can never be fully avoided. Some of the risks include: ESD Damage – Always handle the product in an ESD safe environment. Even if precautions are taken there is always a risk of ESD damage. The damage can remain undetected and cause problems during the lifetime of the equipment.
Dust contamination – Opening a camera may expose the lens and sensor to dust or paint. Dust will affect the optical performance. Lenses need to be disassembled in a dust-free environment, preferably a cleanroom.
Paint overspray – Masking the different components of the equipment is critical. Failure to mask sensitive areas can cause problems with assembling the equipment. Any areas that are not painted at factory or have a different surface treatment than the rest of the parts (threads, ground and electrical contact surfaces) must also be masked to ensure function.

Repaint the product

Preparations

• If applicable, disassemble the device according to the instructions in this document.
• Clean all parts that will be repainted thoroughly to remove grease, dust, or oil.
• To ensure reassembly and functionality of the product, mask any openings (for example for screws, LED indicators, or microphones) before you paint.
• To avoid unwanted reflections, mask the inside of the weathershield before you paint.

Pretreatment of parts

• Use a primer to pretreat the parts before you paint.

The material used in the product is Panlite PC LN-3520ZH.
Disassembly

1. Remove the weathershield, if it’s already attached to the dome cover.
2. Remove the dome cover.
3. Remove the cable cover or conduit cover if you are not going to use it.
4. Remove the dome from the dome cover by releasing it from the snap fits.
5. Remove the anti-reflection ring. Don’t paint it.

Repainting

1. Make sure all necessary preparations of the weathershield and dome cover have been made, see Preparations on page 3 .

2. Apply a thin and even layer of spray paint according to the instructions of the paint manufacturer. Important
   Avoid paint build-up in the area marked with red color.

3. Let the paint dry.

4. To get a better coverage and clearer color, apply a second layer of spray paint.

5. When the paint is dry, remove the masking and reassemble the product.

Reassembly

1. Reattach the anti-reflection ring and the dome to the dome cover.
2. Reassemble the weathershield, dome cover and camera and tighten the screws (torque 1.0 Nm, 0.7 lb ft).

Repainting Instructions
AXIS P32 and AXIS M32 Dome Camera Series
© Axis Communications AB, 2022
Ver. M1.8
Date: April 2022
Part No. T10175628

References

• Warranty implication when repainting | Axis Communications

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>