STREAMLINE HP-GP2100306 Trikleener Broom with Height Adjustable Instruction Manual
- June 5, 2024
- Streamline
Table of Contents
INSTRUCTION MANUAL
STREAMLINE ®
Codes:
HP-GP2100306
Due to the possibility of small amounts of residue remaining after the
manufacturing process, it is important to follow these instructions:
INSTR-HP-GP2100306
STREAMLINE® Warranty
The warranty on all Machines and Equipment is for 1 year (12-months) from the
RECORDED DATE OF PURCHASE.
THIS WARRANTY EXCLUDES NORMAL MAINTENANCE ITEMS, including but not limited to
HOSES, FILTERS, O-RINGS, DIAPHRAGMS, VALVES, GASKETS, CARBON BRUSHES and
damage to motors and other components as a result of failure to replace normal
maintenance items. THIS LIST IS NOT EXHAUSTIVE.
If STREAMLINE® receives notice of such defects during the warranty period,
STREAMLINE® will either, in its opinion, repair or replace components that
prove to be defective.
Replacement parts will only be supplied under warranty, upon the inspection
and approval of the defective parts by STREAMLINE®.
Should it be necessary to supply replacement parts before the opportunity to
inspect, these will be charged at current prices and a credit will only be
issued upon subsequent inspection and warranty approval by STREAMLINE®.
The customer is responsible for the cost of the return of the defective
part. If the warranty is approved, STREAMLINE® will pay for the cost of
the repaired or replacement part.
This warranty excludes the following conditions and circumstances which are at
the discretion of STREAMLINE®:
Wear and tear, misuse, abuse improper maintenance, frost damage, the use of
chemicals other than those supplied or approved by STREAMLINE®, improper
installation or repair, unauthorized modification, incidental or consequential
costs, loss or damage, service, labor or third party charges, the cost of
returning defective parts to STREAMLINE®.
This warranty constitutes the exclusive remedy of any purchaser of a
STREAMLINE® unit and is in lieu of all other warranties, express or
implied, including without limitation any implied warranty of merchantability
or fitness for use, to the fullest extent permitted by law. In no event shall
any implied warranty of merchantability or fitness for use exceed the term of
the applicable warranty stated above and STREAMLINE® shall have no other
obligation or liability.
Important
Unfortunately, these rights cannot be transferred to a third party.
Why STREAMLINE®?
Flexibility
-
STREAMLINE® systems can be built according to customers’ exact requirements
-
For non-standard systems, the user’s needs or specifications are listened to and turned into reality.
Quality -
Whilst price is important, quality is remembered long after price is forgotten
-
We insist on sourcing brand name products from around the world, only of a reputable quality, and bring them together under the STREAMLINE® name
-
All STREAMLINE® products carry a full one year warranty, according to the manufacturers’ standard terms and conditions of sale.
Service
- We have an in-house technical helpline able to answer most of your questions relating to the capabilities and functionalities of all STREAMLINE® products
- If we get it wrong, we will put it right. If you are sent a wrong item, we will immediately attend to sending you the correct item and arrange a collection of the wrong item without any quibbles
- STREAMLINE® is backed by a comprehensive range with massive stocks providing you with a `one-stop shop’ for all your requirements.
Operating your water broom
Connecting the spray nozzles to the manifold
Before installing the nozzles, it is very important to flush the TRIKLEENER®
with clean water.
Slide the outer portion of the quick connect fitting (collar) up, insert the
male portion of the spray nozzle and release to “lock-in” the nozzle. Make
certain that the nozzles are aligned to ensure correct spraying patterns.
Setting the height adjusters
Pushing the metal tab, release the bar so that settings are possible. The
lower the setting, the closer the unit will be to the ground, increasing the
velocity of water and increasing the cleaning power. By raising, it decreases
the velocity thereby creating a “gentler” stream for painted surfaces. ****
Connecting to pressure washer wand
Utilizing the quick connect fitting on the hand wand of the unit, connect
directly onto the top of the TRIKLEENER® male fitting.
Utilizing the TRIKLEENER® to its maximum cleaning power
The unit is designed to be best used at approximately a 45-degree angle to
push the dirt and grime away from the user. There are two methods found
effective. The first is using the unit in a “vacuum cleaning” motion, and the
other is to roll the unit in a straight line in a slow and deliberate manner.
Each method has been found to be effective.
Especially tough cleaning situations
There are times when the area to be cleaned is especially tough and may
require even more water pressure and volume in order to clean in an effective
and efficient manner. In these cases, reduce the number of spray nozzles to 2,
replacing one with a plug. Make certain that the nozzles are located next to
each other and aligned correctly.
Miscellaneous uses
Cleaning street curbs, decks, docks, painted porches, or even 90-degree curbs
can be cleaned utilizing the TRIKLEENER. Simply adjust settings as desired.
Maintenance
After EACH USE, nozzles need to be removed and the quick-connect fittings and
nozzles must be flushed with a hose to continue functioning properly.
Remove nozzles after each use to prevent them from sticking in the quick
disconnects.
Other safety precautions
- ALWAYS have the unit turned off when adjusting, inserting, or removing nozzles or plugs.
- NEVER attempt to adjust nozzle spray patterns when the unit is engaged.
- After completing the cleaning job, and the pressure washer unit is turned off, pull the trigger in your hand wand in order to release pressure BEFORE disconnecting the TRIKLEENER®.
Breakdown:
Breakdown
| No. | Description | Qty. | 8 | WHEEL, 7″ | 1 |
|---|---|---|---|---|---|
| 1 | PAWL ASSY., RIGHT | 1 | 9 | WASHER, FLAT, M10 | 1 |
| 2 | PAWL ASSY., LEFT | 1 | 10 | NUT, M10 | 1 |
| 3 | PLUG, 1/4XM12X1.25 | 1 | 11 | LABEL, WARNING | 1 |
| 4 | PLUG, 1/4 | 1 | 12 | NOZZLE, 65 X 1.35 | 1 |
| 5 | MANIFOLD | 1 | 13 | FRAME ASSY. | 2 |
| 6 | FLAT WASHER, M12 | 1 | 14 | LABEL, WATER BROOM | 2 |
| 7 | COUPLER, 1/4 QC | 1 | 15 | UNCLOGGER, NOZZLE | 2 |
TRIKLEENER® Nozzle sizing chart
Step 1: Find your pressure washer PSI rating on the table above.
Step 2: Find your GPM in the column of your PSI.
Step 3: Find color and this will show what nozzles you should use.
– Will work with nozzles included and/or with one nozzle plugged
– Will work with nozzles included (3 x 1.35)
– Should purchase three 1/4″ quick connect nozzles size #2.0 with a 40-degree
angle
– Should purchase three 1/4″ quick connect nozzles size #2.5 with a 40-degree
angle
Nozzles can be purchased at most Pressure Wash dealers or aftermarket dealers
W: www.streamline.systems
E: sales@streamline.systems
T: +44 (0)1626 830 830
INSTR-HP-GP2100306
Hamilton House, 8 Fairfax Road,
Heathfield Industrial Estate,
Newton Abbot Devon, TQ12 6UD United Kingdom Telephone: +44 (0) 1626 830 830
Email: sales@streamline.systems Visit
www.streamline.systems
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>