winees B0B7HLLQB7 Outdoor Security Camera User Guide

winees B0B7HLLQB7 Outdoor Security Camera

IN THE BOX

• Camera*l

• Power Adapter*1

• Charging Cable *1

• Reset Pin *1

• Quick Start Guide *1
  

• 3M Tape*1

• Screw Pack* 1

PRODUCT OVERVIEW

1. Microphone
2. Light Sensor
3. LED Indicator
4. Spotlight (only in M3 Plus)
5. Reset Button
6. MicroSD Slot (SD card not included)
7. Speaker
   

APP SETUP

1. Scan the QR code below to download the Ai Dot APP.
   

2. Power on the camera, you will hear “Waiting for Wi-Fi configuration” with the camera’s indicator light flashing in green.

3. In the Ai Dot app, press”+” to select M3 Plus/ M3 in brand “Winees·: and follow the instructions on App. Or search for”AiDot” in  App Store or Google Play
   |
   ---|---
   
   

4. Place the camera in the area where you plan to install to test the video quality, ensure that the camera can work normally after the final installation.

INSTALLATION

• Install on the wall
  For a better user experience, we recommend you to install the camera as the below conditions.
  
  Drill a hole with a 13/64 inch (5.16mm) drill bit, then insert the anchor into the hole. The anchor is necessary for walls that are made by hard materials such as concrete, brick or stucco. (3M tape can be used to fix the position before screw driven in.)
  

• Install on the ceiling
  Install on the ceiling (3M tape can be used to fix the position before screw driven in.)
  

• Place on the table or other flat surface (3M tape can be used to fix the position.)

LIGHT INDICATIONS

CAUTIONS

To avoid personal injury and/or possible product damage, the following cautions must be followed:

1. Please use the provided adapter instead of others in case of any damage to the product.
2. Keep out of reach of children. This product contains small parts, which can cause  choking or injury if ingested.
3. To prevent early failure, the camera should only be installed in operating environments  ranging between-20°C – 50°C(-4°F -122°F).
4. Do not install
   • close to heat source
   • near the metal objects and mirrors that cause radio signal attenuation or shading.
5. Do not disassemble or reinstall the camera, otherwise it may cause security risks.
6. Unplug the power cord before cleaning. Do not clean the camera with any liquids, spray cleaner or wet cloth.
7. The slot and opening are used for ventilation, not allowed to be blocked or covered.
8. This product only can be connected to 2.4G WIFI.

Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there i~ no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

Customer Support

NEED HELP?

Email our support team:support@iwinees.com

Linkzone Technology Co., Limited
ROOM 20 5/F WAYSON COMMERCIAL
BLDG28 CONNAUGHT ROAD WEST
SHEUNG WAN, Hong Kong, China.
Phone: 1-855-334-9800
Website: www.iwinees.com
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>