winees M2 pro WPO1002 Indoor Security Camera User Guide
- June 2, 2024
- winees
Table of Contents
winees M2 pro WPO1002 Indoor Security Camera
CAUTIONS
To avoid personal injury and/or possible product damage, the following cautions must be followed:
- Please use sorely the provided adapter instead of others in case of any damage to the product.
- Keep out of reach of children. This product contains small magnets and other small parts, which can cause choking or injury if ingested.
- To prevent early failure. the camera should only be installed in operating environments ranging between -10°C-40°C{14°F- 1040F).
- Do not install
- in wet locations
- outside the premises (outdoors)
- close to heat source
- near the metal objects and mirrors that cause radio signal attenuation or shading.
- Do not disassemble or reinstall the camera, otherwise it may cause security risks.
- Unplug the power cord before cleaning. Do not clean it with any liquids, spray cleaner or wet cloth.
- The slot and opening are used for ventilation, not allowed to be blocked or covered.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not Occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.
PACKAGE CONTENTS
LED ON/OFF DESCRIPTION
INSTALLATION
- Method 1: Table stand
- Method 2: Mount on masonry surface I wooden surface I metal surface, or paste on clean surface
- Step 1: Separate the magnate mount.
- Step 2: Choose different installation accessories according to different surfaces
TROUBLESHOOTING
If the default adding camera operation fails
- Make sure your wireless router has Internet access, and the Wi-Fi signal at the location where you install the camera is good.
- Make sure the camera is plugged in and the status LED is on or flashing
- Reset the camera if the LED is NOT flashing green. Then follow the App to add it.
- Make sure the camera is not added to other User’s accounts. If it is, the owner of the camera has to unbind it first.
- When this step is done, the camera should be added to your account.
If the Micro SD card is not detected by the camera
Make sure the card is good and format it again in the FAT-32 format.
How to do the forced reset?
If you cannot reset the camera from the setting page, please hold the reset button in the pin hole with the reset pin for 5 seconds and release. The camera wll play a voice prompt” Restoring factory settings.
The time of the camera video stamp is not right
Please set the right time zone in the settings.
How long can a Micro SD card (not included) of different capacity record?
REQUIREMENTS AND TECH SPECS
Wi-Fi Network Requirements in order to connect your camera to your Wi-Fi network, it will need to meet the following requirements.
- Supports IEEE 802.11b/g/n
- Your Wi-Fi network broadcasts at 2.4GHz. 5GHz band is not Supported
- Your network upload speed is suggested to be greater than 1 Mbps to have fluent video streaming.
Power (Only for CE)
- 100-240VAC 50/60Hz power supply for the AC adapter
- DC 5V/TA Micro USB input for the camera
- Maximum power consumption 5W
- Frequency range 2412-2472MHz
- Maximum RF transmit power 11b 16+2dBm, 802.11g 54M 14+2dBm, 802.11n HT20 12+2dBm, 802.11n HT40 12+2dBm
- Maximum radio-frequency power 16 dBm
CAMERA
- 1080P full HD @15 frames per second
- Maximum resolution: 1920*1080
- 1/2.9″ color CMOS sensor
- 110° (diagonal) wide angle lens
- 264 Video Compression
- Infra-red night vision: 5m(16ft)
- Motion detection
Audio
- Built-in Microphone and speaker
- Two-way talk
Storage
- Micro SD card storage up to 64 GB (Micro SD card is not included)
- Operating Environment
- Temperature -10°C – 40°C(14°F – 122°F)
- Humidity 95% non-condensing
QUICK START GUIDE
- Step l Scan the QR code below, or search for “AiDot” in App Store or Google Play.
- Step 2 Create an account and sign in.
- Step 3 Press ‘+’ button to add the Winees Cam mini.
- Step 4 Follow the instructions on App. For more information about usage guidelines and FAQs please visit https://www.iwinees.com
FAQs
Do winees WPO1002 indoor cameras record all the time?****
The majority of home security cameras are motion-activated, which means that when they notice motion, they will start recording and inform you. Some people have the ability to continuously record video (CVR). An fantastic tool for ensuring home security and the peace of mind that comes with it is a security camera.
How can you tell if an winees WPO1002 indoor surveillance camera is on?****
To check if the security camera is on, watch to see if it is moving. Examine the condition of the IP security cameras’ LEDs. Access the security camera software. Consider using electronic bug detectors. Check a CCTV’s power indicator to see if it is recording.
Can winees WPO1002 indoor security cameras be hacked?****
Any network-connected gadget is vulnerable to hacking. Even the most expensive and sophisticated CCTV systems may be attacked remotely. Unsurprisingly, hackers are particularly attracted to low-cost DIY interior CCTV cameras.
Are winees WPO1002 indoor security cameras safe?****
Home security cameras are no exception to the rule that any internet-connected gadget is vulnerable to hacking. Wi-Fi cameras are more prone to attack than wired ones, while cameras with local storage are less prone to attack than those that store their video on a cloud server. But any camera can be compromised.
Are winees WPO1002 security cameras hard on electricity?****
Generally speaking, security cameras, whether they be CCTV analogue cameras or PoE IP security cameras, use much less energy than other devices like laptops or bread toasters.
Do winees WPO1002 security cameras work when power off?****
The short answer is that your CCTV camera system won’t continue to function unless it is built to automatically switch to a backup power source when the mains supply is interrupted.
Do winees WPO1002 o security cameras need light at night?****
These gadgets, which are commonly installed on cameras, emit a spotlight of infrared light, enabling them to take pictures and videos and see in complete darkness. Infrared LEDs are increasingly commonly integrated into security cameras to give night vision in dim or no light environments.
Are winees WPO1002 security cameras recording if they have no lights?****
Some individuals are interested to know whether the cameras will function even if there is no electricity, even though the majority of current CCTVs allow for remote viewing even when the network is shut down.
Are home winees WPO1002 security cameras worth it?****
Cameras for home security are worthwhile. If a home has security cameras, many burglars will decide not to break in, and if they do, the owners can use the video footage as evidence in a criminal case. Because they can confirm that a crime is being committed, cameras can also result in quicker police responses.
What does a blue light on a winees WPO1002 security camera mean?****
A security camera’s blinking blue light indicates that the WiFi protected configuration is ready.
How safe are winees WPO1002 indoor security cameras?****
Home security cameras are no exception to the rule that any internet-connected gadget is vulnerable to hacking. Wi-Fi cameras are more prone to attack than wired ones, while cameras with local storage are less prone to attack than those that store their video on a cloud server. But any camera can be compromised.
Do all home winees WPO1002 security cameras require Wi-Fi?****
Wi-Fi is not necessary for all home security cameras. LTE plans can be used instead of Wi-Fi by several cameras, including the Arlo Go and the Reolink Go. Other home security cameras don’t even have a connection to the internet; instead, they record to local hard discs for storage.
How do you know if winees WPO1002 a security camera is recording?****
If a light on a security camera is blinking, the camera is recording. Typically, this is red, although it might also be green, orange, or another color. The lamp is referred to as a “status LED.”
Can a winees WPO1002 security camera be on without the light?****
The lower the lux rating, the less light is required to capture a picture by a security camera. Without the need for outside lighting, cameras with a lux rating of 0.000 may record a picture.
What do red dots on a winees WPO1002 security camera mean?****
Most true security cameras will have IR lights visible within the lens. These show up as tiny, dull red dots on the screen and indicate that the camera is using motion detection. If the lighting around the camera is dimmed, they are simpler to see. Rarely ever will IR lights be noticeable in bogus security cameras.