comsol BT07T Bluetooth Audio Transmitter User Manual

comsol BT07T Bluetooth Audio Transmitter

Product Layout

1. 3.5mm Audio Jack
2. LED Indicator
3. On/Off (Pairing) Button
4. Charging Port

Features

• Add Bluetooth functionality to your Apple AirPods , AirPods Pro or other wireless headphones
• Ideal for an airplane entertainment system, gym equipment, lV or any device with a 3.5mm headphone jack.
• Go wireless and tangle free
• Built-in rechargeable battery works for up to 8 hours on a full charge
• Recharge the battery using a standard USB charger
• Includes RCA adapter to connect to a home stereo
• Works up to a distance of 10 metres
• Recharge time: 2 hours
• Compatible with Apple AirPods, AirPods Pro, Bose, Sony, Sennheiser Beats, JLB, Samsung, Jabra and most other wireless headphones

Pairing

• Make sure the Comsol STOTT is turned off

• For Apple AirPods, put both AirPods in the charging case and open the lid

• Press and hold the setup button on the back of the case until the status light flashes white

• For other wireless headphones, refer to the user manual for instructions on how to put your headphones in pairing mode
  Press and hold the STOTT On/Off (Pairing) button for 6 seconds until the LED flashes red and blue alternatively

• Your AirPods or headphones will pair automatically with the STOTT, depending on your headphones, this can take up to one minute

• After successful connection, the blue LED will flash

Please note: You can only pair with one set of headphones at a time. If you want to pair the BTOTT with a different set of headphones, turn off the STOTT and then start the pairing process from the beginning. If you are having trouble pairing your headphones, turn the Bluetooth function off on your mobile phone.

Operation

• To turn on the STOTT, hold the On/Off button for 3 seconds and the LED will flash blue
• The STOTT will automatically connect to the last headphones it was connected to
• Plug the 3.5mm audio jack into any 3.5mm audio socket and the audio output should be transmitted to you AirPods or headphones
• To turn off the BT07T, hold the On/Off button for 3 seconds and the LED will turn red and then turn off

Charging

• Use the included charging cable to connect the STOTT to a standard USB charger
• If the BT07T is off, when you connect the charging cable, the STOTT will turn on
• During charging, the LED will flash red and blue. When charging is complete, the LED will flash blue only
• You can charge the STOTT, while listening to music on your headphones. Simply connect the included charging cable to a USB charging port while the BT07T is streaming audio from an airplane entertainment system or other 3.5mm headphone jack

Reset BT07T

• If you are having problems with the STOTT, you can reset to factory defaults using the following instructions
• Make sure the STOTT is turned off
• Press and hold the On/Off button for 8 to 1 0 seconds and the LED will flash Blue -> Blue/Red -> Blue -> Blue/Red
• Press and hold the On/Off button for 3 seconds and the LED will turn red and then turn off
• The BT07T is now in factory default mode

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>