ifi GO blu Mobile Bluetooth Headphone Amp User Guide
- June 6, 2024
- ifi
Table of Contents
Mobile Bluetooth Headphone Amp
Highlights
- The pocket-size amp delivers heavenly headphone sound on the go
- Built-in mic for hands-free calls when paired with your smartphone
- Connect wirelessly to phones, tablets and computers via high-definition Bluetooth
- Separate Bluetooth, DAC and amp stages – individually optimized for maximum performance
- Balanced twin-mono circuit design combines captivating sonic power and nesse
- Fully balanced and S-Balanced outputs make the most of all headphone and earphone types
- Whatever the source device – Android, iOS, PC or Mac – GO blu delivers maximum sound quality over Bluetooth
- Plays music up to 24 bit/96kHz via USB-C
Features
- Advanced Bluetooth module with QCC5100 chipset handles every HD format
- Supported codecs include: AAC, SBC, aptX, aptX HD, aptX Adaptive, aptX LL, LDAC, LHDC/HWA
- Future-proof Bluetooth – upgradeable architecture enables the addition of future codecs
- Ultra-low jitter DAC with customized digital lter
- Symmetrical twin-mono amp circuitry with DirectDrive technology ensures ultra-low distortion
- Precision rotary volume control with auto-gain – adjusts output to match your headphones
- Output delivers up to 5.6V for high power– drives even tough headphone loads with ease
- Two headphone outputs: 4.4mm Pentaconn balanced and 3.5mm S-Balanced
- S-Balanced output cuts distortion by 50% with single-ended headphone connections
- XBass and XSpace – tailor sound to suit your headphones and personal sonic taste
Specifications
Chipset: Qualcomm QCC 5100 Series TM
Input: USB-C/Bluetooth 5.1 ( AAC, SBC, aptX, aptX HD, aptX Adaptive, aptX LL,
LDAC, LHDC/HWA Codec)
Headphone Outputs: 4.4mm/3.5mm (BAL/UnBAL)
Power Output:
Balanced: 245mW @ 32Ω; 5.6V @ 600Ω
UnBAL: 165mW @ 32Ω; 2.8V @ 600Ω
Output Impedance: <1Ω (BAL/UnBAL)
SNR: 111dBA/106.5dBA (BAL/UnBAL)
DNR: 120dB(A) (BAL/UnBAL)
THD + N: <0.009% (BAL 6.5mW/2.0V @ 600Ω)/<0.03% (unBAL100mW/1.27V @ 16Ω)
Frequency Response: 20Hz – 45kHz (-3dB)
Battery: Lithium-polymer 450mAh approx. ~10 hours
Power System: Charging via USB-C, BC V1.2 compliant up to 1000mA charging
current and 6.3 volts
Dimensions: 55 x 34 x 13 mm (2.2″ x 1.3″ x 0.5”)
Weight: 26 g (0.92 oz)
Warranty period: 12 months
*Specications are subject to change without notice.
Contents
• 1 x GO blu
• 1 x USB-A to USB-C Cable
• 1 x Microbre protective bag
ABBINGDON EU BV
Mercatorweg 28 Arnhem 6827 DC Netherlands
Technology licensed from
AMR (UK). Assembled in China.
Ver1.1
audio
Documents / Resources
| ifi
GO blu Mobile Bluetooth Headphone
Amp
[pdf] User Guide
GO blu Mobile Bluetooth Headphone Amp, Bluetooth Heaphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>