winees M3 Plus 4MP Outdoor Security Camera with 4CCT Spotlight Instruction Manual
- June 12, 2024
- winees
Table of Contents
winees M3 Plus 4MP Outdoor Security Camera with 4CCT Spotlight
IN THE BOX
- Camera
- Power Adapter
- Charging Cable
- Reset Pin
- Quick Start Guide
- 3MTape
- Screw Pack
PRODUCT OVERVIEW
- Microphone
- Light Sensor
- LED Indicator
- Spotlight only in M3 Plus
- Reset Button
- MicroSD Slot SD card not included
- Speaker
APP SETUP
- Scan the QR code below to download the Ai Dot APP
- Or search for”AiDot” in App Store or Google Play
- Power on the camera, you will hear “Waiting for Wi-Fi configuration” with the camera’s indicator light flashing in green.
- In the Ai Dot app, press”+” to select M3 Plus/ M3 in the brand “Winees·: and follow the instructions on App.
- Place the camera in the area where you plan to install to test the video quality, and ensure that the camera can work normally after the final installation.
INSTALLATION
- Install on the wall For a better user experience, we recommend you to install the camera as per the below conditions.
- Drill a hole with a 13/64 inch (5.16mm) drill bit. then insert the anchor into the hole. The anchor is necessary for walls that are made of hard materials such as concrete, brick, or stucco. (3M tape can be used to fix the position before the screw driven in.)
- Install on the ceiling Install on the ceiling (3M tape can be used to fix the position before the screw is driven in.)
- Place on the table or other flat surfaces (3M tape can be used to fix the position.)
LIGHT INDICATIONS
| Status | Description |
|---|
Solid Red
| Power on/ System booting / Factory resetting
Flashing Red| Wireless connection/ cloud connection fail
Solid Green| Wireless connected
Flashing Green| System ready for WiFi setup/ Firmware update
Red and Green f1ashing alternately| unable to connect to the cloud
CAUTIONS
To avoid personal injury and/or possible product damage. the following cautions must be followed
- Please use the prO\lided adapter instead of others in case of any damage to the product
- Keep out of reach of Children. This product contains small parts. which can cause choking or injury if ingested.
- To prevent early failure, the camera should only be installed in operating environments ranging between-200C -500C(-4°F -122″ F).
- Do not install
- a close heat source
- on the metal objects and mirrors that cause radio signal attenuation or shading.
- Do not disassemble or reinstall the camera, otherwise, it may cause security risks.
- Do not clean the camera with any liquids,
- The slot and opening are used for ventilation, not allowed to be blocked or covered.
- This product only can be connected to 2.4G WIFL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>