winees HS-001A Smart Table Lamp User Guide
- June 5, 2024
- winees
Table of Contents
Smart Table Lamp User Guide
Setup instructions for Smart Life App, Alexa, and Google Assistant. 
Product Specification
Package Includes
- 1 x LED Table Lamp
- 1 x AC Adapter
- 1 x User Manual
Specification
| Model | HS-001A |
|---|---|
| Wattage | 5.5W |
| Adapter Input | 100-240V/AC 50/60Hz |
| Adapter Output | 5V/1.5A |
| Current Ripple | Flicker-Free ±3% |
| Network | WIFI IEEE802.11b/g/n(2.4GHz) |
| Luminous Flux / Intensity | 3501m@5700K. Red 7.2cd. Green:12cd, BIue:6.6cd |
| CCT / Color | 2000K-5700K / 16 Million Colors |
| CRI | Ra->80, Ra:>90@2000K/3000K |
| IP Rating | IP20 |
| Operation Temperature | -10°C-40°C/143F-104°F |
| Lifespan | 30,000hrs |
| Dimensions | 3.9″ X 3.9″ X 7.1″ (100mm X 100mm X 180mm) |
Product Diagram
Smart Life App Setup
Preparation
Prepare the Lamp for Connection
Add the Lamp to Smart Life (via Bluetooth)
The lamp will pop out and prompt to be added when you open the Smart Life App.
Add the Lamp to Smart Life (Manually)
Or you could add the lamp to Smart Life manually.
NOTE: If you have trouble setting up the lamp, please contact us via support©iwinees.com.
APP Operation Instructions
Connect to Alexa
Connect to Google Assistant
After you assign rooms for devices, your devices will be listed in the Home Control Page. Then you can control the lamp via Google Home
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>