winees WP2700237 F1X Spotlight Camera User Guide

WP2700237 F1X Spotlight Camera
User Guide Winees FIX Spotlight Cam
Model WP2700237 (NA)
Model WP2700231 (EU)
Model WP2700235 (J P)
Model WP2700233 (UK)

Cautions

To avoid personal injury and/or possible product damage, the following cautions must be followed:

1. Please use the provided adapter instead of others in case of any damage to the product.
2. Keep out of reach of children. This product contains small magnets and other small arts, which can cause choking or injury if ingested.
3. To prevent early failure, the camera should only be installed in operating environments ranging between -20°C ~  0°C(-4°F ~ 122°F).
4. Do not install – close to a heat source – near the metal objects and mirrors that cause radio signal attenuation or shading.
5. Do not disassemble or reinstall the camera, otherwise, it may cause security risks.
6. Unplug the power cord before cleaning. Do not clean the camera with any liquids, spray cleaner or wet cloth.
7. The slot and opening are used for ventilation, not allowed to be blocked or covered.
8. This product only can be connected to 2.4G WIFI.

Package Contents

Description

(slow)connecting the network (fast)
• Solid blue light on the camera is working correctly
• Solid red light on the camera is malfunctional
Microphone| Capture sound for your video
SD card slot| Support local SD Card storage (Max.128 GB)
Reset| Press and hold for 5 seconds to reset the camera (if you have modified settings, they will
return to factory defaults)

Installation

1. Wall mount

2 . Ceiling mount

Connection

1. Scan the QR code below to download the AiDot APP.

apps.aidot.com

Or search for “AiDot” in App Store or Google Play

. Power on the camera, you will hear “Waiting for Wi-Fi configuration” with the camera’s indicator light flashing in green.

3. In the AiDot app, press ‘+’ – “devices”, select Winees F1X Spotlight Cam, and follow the instructions on App.

4. Place the Winees F1X Spotlight Cam in the area where you plan to install to test the video quality, and ensure that the camera can work normally after the final installation.

Functions

Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with a good vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Full-color vision
With white light, the captured pictures and videos of motion detection are colorful which can provide you with a better vision.
Motion detection
Support smart motion detection. The camera will detect movements, and then send you to push notifications and app alerts.
Record

Support 24H continuous recording with high capacity SD storage or Cloud storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision technology.

FCC Statement

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user  is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible or compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.

IISED statement

This device contains license-exempt transmitter(s)/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

NEED HELP?
Email our support team: support@iwinees.com
Scan the QR code to learn more about FAQ and set up:

https://www.iwinees.com/setup-guide/

Link zone Technology Co., Limited
Room 510, 5/F, Wayson Commercial Building, 28 Connaught Road West, Sheung Wan, Hong Kong,
China
Phone: 1-855-334-9800
Website: www.iwinees.com
Email: support@iwinees.com
Made in China

References

• ce.com
• Winees Homepage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>