winees M2X 2K Indoor Camera User Guide

: June 13, 2024
: winees

Table of Contents

winees M2X 2K Indoor Camera
Product Information
WHATS IN THE BOX
PRODUCT OVERVIEW
INSTALLATION
LIGHT INDICATIONS
FCC Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

winees M2X 2K Indoor Camera

Product Information

The M2X is a camera designed to capture fun moments. It comes with various accessories and features that enhance its functionality.

In the Box:

Camera
Power adapter
Charging Cable
Quick Start Guide
Wall-mounted plate
Screw Pack

Product Overview:

The M2X camera has the following features:

IR Light
Indicator Light
Microphone
Micro SD Slot (SD card not included)
Speaker
Micro USB Port

App Setup:

Scan the QR code below to download the AiDot APP. Alternatively, search for AiDot in the App Store or GooglePlay.
Power on the camera. The indicator light will flash in blue, indicating that it is waiting for Wi-Fi configuration.
In the AiDot app, press “+” to select M2X under the brand “Winees” and follow the instructions on the app.
Place the camera in the area where you plan to install it to test the video quality and ensure that it works properly.

Installation:

For a better user experience, it is recommended to install the camera under the following conditions:

Place on the table or other flat surface.
Install on the ceiling using the included mounting bracket to fix the camera to a clean surface.

Light Indications:

Status	Description
Solid Red	Camera is malfunctioning
Flashing Red	Camera is waiting for network connection (slow) / connecting to

the network (fast)
Solid Blue| Camera is working correctly
Flashing Blue / Red and Blue| System is ready for Wi-Fi setup / firmware update
Unable to connect to the cloud

Cautions:

Please handle the product carefully to avoid any damage. Use the provided accessories instead of other items to protect the product.
Keep the product out of reach of children to prevent any accidents or damage.
To prevent early failure, ensure that the camera is used within the recommended operating environment.
Do not expose the camera to wet locations (outdoor) or near sources of moisture.
Do not cover or block the camera’s vents for ventilation purposes.
Unplug the power cord before cleaning. Do not clean it with an abrasive cleaner or wet cloth.
This product can only be connected to a 2.4G Wi-Fi network.

Need Help?

Contact our support team:

Email: [email protected]
Address: Linkzone Technology Co., Limited, Room 510, 5/F, Wayson Commercial Building, 28 Connaught Road West, Sheung Wan, Hong Kong, China
Phone: 1-855-334-9800
Website: www.iwinees.com
Made in China

WHATS IN THE BOX

NOTE: If 2 Pack all items will be doubled, except the quick start guide.

PRODUCT OVERVIEW

R Light
Indicator Light
Microphone
Micro SD Slot (SD card not included)
Reset Button
Speaker
Micro ISS Dort

APP SETUP

Scan the QR code below to download the AiDot APP. Or search for“AiDot” in App Store or Google Play
Power on the camera, you will hear “Waiting for Wi-Fi configuration” with the camera’s indicator light flashing in blue.
In the AiDot app, press”+” to select M2X in brand “Winees”, and follow the instructions on App.
Place the camera in the area where you plan to install to test the video quality, ensure that the camera can work normally after the final installation.

INSTALLATION

For a better user experience, we recommend you to install the camera as the below conditions

Place on the table or other flat surface
Install on the ceiling Use the included mounting bracket to fix the camera to a clean surface.

LIGHT INDICATIONS

Status	Description
Solid Red	Camera is malfunctional
Flashing Red	Wait for network connection (slow) / Connecting the network

(fast)
Solid Blue| Camera is working correctly
Flashing Blue| System ready for WiFi setup / Firmware update
Red and Blue| Unable to connect to the cloud

CAUTIONS

To avoid personal injury and/or possible product damage, the following cautions must
be followed:

Please use sorely the provided adapter instead of others in case of any damage to the product.
Keep out of reach of children. This product contains small magnets and other small parts, which can cause choking or injury if ingested.
To prevent early failure, the camera should only be installed in operating environments ranging between 0°C ~ 40°C (32°F ~ 104°F).
Do re inetall
- in wet locations
- outside the premises (outdoors)
- close to heat source
- near the metal objects and mirrors that cause radio signal attenuation or shading.
Do not disassemble or reinstall the camera, otherwise it may cause security risks0.
Unplug the power cord before cleaning. Do not clean it with any liquids, spray cleaner or wet cloth.
The slot and opening are used for ventilation, not allowed to be blocked or covered.
This product only can be connected to 2.4G Wi-Fi.

Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Consult the dealer or an experienced radio/TV technician for help.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and vour bodv
ISED Statement
This device contains licence-exempt transmitter (s)/receiver (s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

This device may not cause interference
This device must accept any interference, including interference that may cause undesired operation of the device

NEED HELP ?