Avantree BTHS-NB20 Wireless Sleeping Earphones User Manual

Avantree BTHS-NB20 Wireless Sleeping Earphones

Product Information

Model No.: BTHS-NB20

Product Overview

• Charging port
• LED charging indicator
• ON/OFF switch
• LED status indicator
• Multifunctional button

Button Functions

Tap once to play/pause
Tap once to accept/end call
Press & hold for 2 seconds to reject call
Tap + / – once to increase / decrease volume
Press & hold + / – for 2 seconds to skip/replay track

LED Indicators

Charging the Earbuds

The earbuds’ LED will flash red every 5 seconds to indicate low battery. Plug the provided micro USB charging cable into the charging port, then connect the other end to a 5V/500mA-2A rated USB adapter (your phone charger or similar should work) or PC USB port. Solid red lights on the earbuds indicate that charging is in progress; once the lights turn off, your earbuds will be at full battery.

Connecting the Earbuds to Your Device

1. Turn on the earbuds. For first-time use, the earbuds will enter
2. PAIRING mode automatically. If not, put your earbuds into PAIRING mode by pressing & holding the PAIR button until the LED flashes red & blue alternately.
3. Turn on your device’s Bluetooth and select Avantree Repose in the Bluetooth menu.
4. Keep the earbuds close to your device and wait for 5-10 seconds or until they connect. Once they’re successfully connected, the earbuds’ LED indicator will turn off.

Specifications

• Bluetooth version: v5.0
• Audio codec support: FastStream, SBC
• Supported profiles: HSP v1.2, HFP v1.6, AVRCP v1.4, A2DP v1.2
• Operating range: Up to 30ft / 10m
• Playtime: Up to 18hrs
• Max volume: 96 dB
• Charging time: ~1.5hrs
• Drivers: 6mm
• Impedance: 16
• Frequency response: 20Hz – 20KHz
• Power port: Micro USB
• Power supply: 5V/500mA-2A rated USB charger
• Weight: 29g

FAQ

What’s the best way to take care of & maintain upkeep for my earbuds?
Regularly cleaning your earbuds before and after use not only protects them from potential damage, but also helps eliminate sound muffling issues. You can use dry cotton swabs or similar to gently wipe dust, earwax, and oil from the earbud tips on a regular basis in order to maintain upkeep.

Product Overview

Button Functions

LED Indicators

A

| Solid red| Charging
Red flash every 5 seconds| Low battery

B

| Solid blue| Power on
Solid red for 1 second then off| Power off
Alternate red & blue flashes, “PAIRING” voice indicator| ****

Pairing

LED off, “CONNECTED” voice indicator| Connected
Solid blue| Disconnected
Blue flash every 5 seconds| Out of range

Charging the Earbuds

1. The earbuds’ LED will ash red every 5 seconds to indicate low battery
2. Plug the provided micro USB charging cable into the charging port, then connect the other end to a 5V/500mA-2A rated USB adapter (your phone charger or similar should work) or PC USB port.
3. Solid red lights on the earbuds indicate that charging is in progress; once the lights turn o, your earbuds will be at full battery.

Connecting the Earbuds to Your Device

• STEP 1
  Turn on the earbuds. For rst time use, the earbuds will enter PAIRING mode automatically.
  If not, put your earbuds into PAIRING mode by pressing & holding the PAIR button until the LED flashes red & blue alternately.

• STEP 2
  Turn on your device’s Bluetooth and select “Avantree Repose” in the Bluetooth menu.

• STEP 3
  Keep the earbuds close to your device and wait for 5-10 seconds or until they connect. Once they’re successfully connected, the earbuds’ LED indicator will turn off.
  For subsequent use, your earbuds should automatically reconnect to the last- paired device within a few seconds of being turned on. If not, you can manually activate reconnection by tapping the PAIR button once, or by selecting “Avantree Repose” in your device’s Bluetooth menu.
  NOTE : You’ll need to adjust the volume on both the earbuds & your phone to reach the lowest volume levels.

Specifications

FAQ

Below are some of the most common questions people have during setup.

• What’s the best way to take care of & maintain upkeep for my earbuds?
  Regularly cleaning your earbuds before and after use not only protects them from potential damage but also helps eliminate sound-mining issues. You can use dry cotton swabs or similar to gently wipe dust, earwax, and oil from the earbud tips on a regular basis to maintain upkeep.

• Can I replace the earbud tips?
  Unfortunately, no. The Repose is designed with smaller-than-average earbud tips that are optimized for sleeping comfort, so the tips are not replaceable. You can return your Repose within 60 days of purchase for a full refund as long as nothing has been damaged or broken. Please contact us at support@avantree.com to initiate this process, and feel free to check out NB18 & NB16 to see if they’d better suit your needs!

• Can I connect the earbuds to my TV?
  You can technically connect your Repose directly to a smart TV via the TV’s built-in Bluetooth, but doing so will result in significant audio delays. To utilize the Repose’s FastStream codec for no lip-sync delays, you’ll need to pair with a transmitter that also supports FastStream, such as the Avantree Orbit or Audikast.

You can find a full FAQ list at avantree.com/support/repose, or contact us directly for additional assistance.

Contact Us

• Support Tickets avantree.com/submit-a-ticket
• Support Email support@avantree.com
• USA / CA +1800 232 2078 (9am-6pm PST, Mon-Fri )
• UK +44 20 8068 2023 (9am-6pm, GMT, Mon-Sat)
• DE +49 32221097297 (11am-9pm, CET, Mon-Sat )
• FR + 33 176340312 (11am-9pm, CET, Mon-Sat )
• IT +39 06 9480 3330 (9am-6pm, CET, Mon-Sat )
• ES + 34 931786261 (9am-6pm, CET, Mon-Sat )
• AU + 61 2 8310 9897 (11am-7pm, AEST, Mon-Fri)
• FAQ avantree.com/support/repose
• Product Registration avantree.com/product-registration

Model No: BTHS-NB20
Dispose of the packaging and this product in accordance with the latest provisions. Z-PKQG-NB20-V2

References

• Product Registration
• Submit a Ticket For Customer Service | Avantree
• Repose Product Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>