PETKIT 23N018 PuraX Self Cleaning Litter Box Instruction Manual
- June 14, 2024
- PETKIT
Table of Contents
PETKIT 23N018 PuraX Self Cleaning Litter Box
SCAN TO VIEW VIDEO GUIDE FOR INSTALLATION AND INSTRUCTIONS
ADD THE CONCENTRATED SOLUTION, THEN POUR IN KITTY LITTER
Take out cylinder: To unlock the cylinder that holds the concentrated solution, twist the release button for the cylinder in a clockwise direction. The release button is located on the end of the cylinder on the back of the litter box. After releasing the cylinder, use both hands to keep the opening used for litter removal closed, and raise the cylinder upward to remove. *If the covering has not already been removed from the litter box, make sure to remove it by sliding it off before taking out the cylinder.
Fill with the concentrated solution: Remove the orange soft plastic lid of the odor-removal device and pour the entire bottle of concentrated solution into the odor-removal device. Reattach the soft-plastic lid to the odor- removal device, making sure it is securely fastened.Reinstall the cylinder: Using both hands to keep the opening for litter removal closed, reinstall the cylinder into the back of the litter box.
Pour the kitty litter into the opening in the rotating cylinder used to dispense the litter. (Make sure you do not pour in too much kitty litter. The amount of kitty litter should not exceed the MAX Line indicated inside the rotating cylinder.) The release button, located on the back of the kitty litter box, should be rotated counterclockwise, locking the cylinder in place. Place the cover back on the litter box. (*The PETKIT logo should face the front opening of the litter box once the cover is replaced.)
INSTALL TRASH BAG
(HANG THE BAG FROM THE HOOKS LOCATED ON THE INSIDE OF THE WASTE COLLECTION
BIN)
Make sure you install the trash bag correctly and flatten out the edges of the
bag. Otherwise, it may influence the ability of the device to sense the amount
of urine in the litter box.
- Take out the entire waste collection bin.
- Detach the ring used to secure the trash bag onto the waste collection bin.
- Open trash bag all the way up, and hang it from the four trash bag hooks located on the waste collection bin.
- Place on the trash bag ring to secure the trash bag in place and put the waste collection bin back into the bottom of the litter box.*When placing the trash bag ring, make sure the front of the trash bag ring is facing forward.
INSERT THE LITTER PAD
Spread out the litter pad and place the two front legs of the litter box in the left and right leg holes of the litter pad. If this step is not done as instructed, it may render the liquid detection function of the odor-removal device ineffective and influence the overall lifespan of the odor-removal device.
The orange area on the litter pad is the effective range of the thermal sensor. Once the cat enters this area, it will be recognized by the sensor, and the device will automatically cease functioning.
PLUG IN THE POWER CORD, START USING
Take the cord adapter and attach it to the power slot on the back of the litter box, near the bottom. Take the plug end of the cord and plug it into a power socket.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>