Access HDW100 Wireless HDMI Extender User Manual

Access HDW100 Wireless HDMI Extender

Introduction

Overview
The 1080P wireless HDMI extender set extends HDMI signals from a source device to a display device wirelessly up to 200 meters or through a Cat 5e/6 cable up to 120 meters. It is ideal for applications for homes and offices.

Features

• Transmits 1080P HDMI signals up to 200m wirelessly.
• Transmits 1080P HDMI signals up to 120m through a Cat 5e/6 cable.
• HDMI loop-out on the transmitter to connect to a local display, allows easy monitoring of the source signal.
• IR extension allows you to control the source device from a remote location.

Package Contents
Before you start the installation of the product, please check the package contents:

• Transmitter x 1;
• Receiver x 1;
• Others:
  • Antennas x 2;
  • Power Adapters (DC 5V 1A) x 2;
• IR Emitter x 1; B
• roadband IR Receiver (30-50KHz) x 1;
• Mounting Ears (with Screws) x 4;
• User Manual x 1

Panel

Installation and Application

Bracket Installation
Note: Before installation, please ensure the device is disconnected from the power source.

1. Position and install the mounting brackets using the mounting screws provided. Repeat above step for the other side of the device.
2. Attach the brackets to the surface you want to hold the device against using the screws (not included).

Application

1. 1-1 Wireless Transmission
2. 1-1 Wired Transmission

Note:

Specifications

Technical

Input A/V Port|

• Transmitter: 1 x HDMI
• Receiver: 1 x LAN, 1 x WLAN

Input Resolutions| Up to 1080P@60Hz
Output A/V Port|

• Transmitter: 1 x HDMI, 1 x LAN, 1 x WLAN
• Receiver: 1 x HDMI

Output Resolutions| Up to 1080P@60Hz
Compliance| HDMI 1.3, HDCP 1.4
Transmission

Distance

|

• Wireless: 200m/656ft (line of sight)
• Wired: 120m/394ft

General

Operating

Temperature

| +32°F ~ +113°F (0°C ~ +45°C) 10% ~ 90%, non-condensing
Storage Temperature| -4°F ~ 140°F (-20°C ~ +70°C) 10% ~ 90%, non-condensing
Power Supply| DC 5V 1A
Power Consumption| TX: 3.5W (Max) RX: 1.6W (Max)
ESD Protection| Human body model:
±8kV (air-gap discharge)/±4kV (contact discharge)
Product Size (W x H x D)| 140mm x 21mm x 80mm/5.5” x 0.83” x 3.15″ each for TX and RX (Antennas not included)
Net Weight| TX: 0.31kg; RX: 0.30kg
Gross Weight| 1.10kg

Warranty

Products are backed by a limited 1-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable.

1. The original serial number (specified by AV Access Technology Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible.
2. The warranty has expired.
3. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
4. The defects are caused by any force majeure including but not limited to accidents, fire, earthquake, lightning, tsunami and war.
5. The service, configuration and gifts promised by salesman only but not covered by normal contract.
6. AV Access Technology Limited preserves the right for interpretation of these cases above and to make changes to them at any time without notice.

Thank you for choosing products from AV Access.
If you have any question, please contact us via the following emails:

• General Enquiry: [email protected]
• Customer/Technical Support: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>