VIABECS SYFT7294L 6G 128G Wireless Apple Car Play Radio Installation Guide
- June 1, 2024
- ViaBecs
Table of Contents
VIABECS SYFT7294L 6G 128G Wireless Apple Car Play Radio
Installation Video
- STEP 1: How to remove the factory radio.
- https://www.youtube.com/watch?v=OPOWW6Pq6w4
Check Your Factory Radio
- SYFT7294L Radio comes with XC004 harness which the harness only support steering wheel control. If your tacoma has factory jbl amplifier or backup camera, please purchase SYFT7294H model.
- OEM Radio Model A: 2005-2012 Toyota Tacoma with small screen. This radio is wihout factory JBL Amplifier and factory Backup camera.
- OEM Radio Model B: 2012-2014 Toyota Tacoma with large screen
- The factory radio has factory JBL Amplifier and factory backup camera.
- OEM Radio Model C: 2011-2015 Toyota Tacoma with large screen
- The factory radio has factory JBL Amplifier and factory backup camera.
- CAN004-X harness with Simple Soft Canbus fits Model B and Model C. It can support factory factory SWC, factory JBL and factory backup camera.
- You can purchase it via the link below.
- https://www.amazon.com/ViaBecs-Highlander-2015-2018-Aftermarket-Connector/dp/B09BBB5B83
How to connect CAN004-X harness
- STEP 1: Here are instructions for connecting the harness to CAN004-X.
- STEP 2: How to connect factory backup camera
- You need to connect the yellow male camera RCA of CAMERA Connector （CAN004-X）with the PIN10 Rear CAM VIN.
- Note: It is a Nissan Wiring harness in the picture. It is as a reference.
- STEP 3: How to Choose the options for Canbus
- S1: connect the head unit with your Phone hotspot or wifi first.
- Press Car Settings — Factory — Select Models — password is 123456 — Model choose.
- S2: Choose CanBox Brand: Simple Soft — Toyota– Models:2010 Sequoia — Config: Public — Logo：Toyota
Finally, press ok to save the settings. Then the head unit will update it
automatically.
Here is the video as a reference.
Video: Set up canbus option on TS10 Radio
https://www.youtube.com/watch?v=PKbGqFFcCAc&t=51s
Radio Wiring Diagram
Device Ports
STEP 1: How to connect aftermarket backup camera
- Video: How to wire a Backup Camera
- https://www.youtube.com/watch?v=NBKY6S4d5QY
STEP 2: Set Camera Format
Problem: Why my backup camera image is black when I put the car in
reverse?
Please confirm the resolution of your camera first.
- If your camera is not HD, please choose normal — SD — NTSC/PAL.
- If your camera is HD version, please choose the normal — HD — AHD 720P/25fps, or AHD 1080P/25fps.
- Then test the camera again after you change the camera format.
TS10 Head Unit FAQs
- Q1: What is the Factory Setting Password?
- A: The password is: 123456
- Q2: What is the Reset factory?
- A: The password is: 78901
- Q3: How to change the KPH to MPH?
- Please click Theme app — Setting — Plugin –Speed Unit
- You can change to KPH to MPH
- How To Change Car Launcher Theme In ViaBecs Car Stereo Video: https://www.youtube.com/watch?v=HXSWJOeRbew
- Q4: How do i update the ViaBecs TS10 software?
- You can update the system and MCU online.
- Please connect your home wifi first. and then open the car setting app — about — Detection Update.
- Video: https://www.youtube.com/watch?v=0BABIjvTllw
- Q5: How to activate Tlink for Apple car play & Android Auto?
- How to Connect and Use Wireless Apple Carplay on ViaBecs TS10 Radio
- Video: https://www.youtube.com/watch?v=gizPQ1wS7aA
- S1. You need to connect wifi to activate Tlink when you use it at the first.
- How to find the wifi.
- Please drop down Quick Setting Menu.
- And then a long-press wifi icon to turn on it. and then you can try to connect your phone hotspot first.
- Note: Please clear the Tlink usage record first.
- S2. if Tlink still asks you to put the auth_key, please take a clear photo of the QR activating code and then send me. and then my engineer will activate it after scanning the code.
- Please click “About” on the Tlink app
- Choose the first option ((Wireless Carplay + Wireless Android Auto + Wired Android Auto) Then click the “refresh” to get the new QR code
- Take a photo and send it to me
- Note: the code will be invalid if the time is too long. and then our engineer will scan the QR code to activate it.
- Q6: How To Change Boot Logo On ViaBecs Android Head unit Car Stereo?
- Q7: How to remap panel button on ViaBecs car stereo?
Read User Manual Online (PDF format)
Loading......