plumbworld Extra Large White Cross Pattern Instruction Manual
- June 2, 2024
- plumbworld
Table of Contents
plumbworld Extra Large White Cross Pattern
Instruction Manual
Please note that there is no No.2 panel!
PRODUCT OVERVIEW
Tools Needed
- Churn drill
- Hammer
- Cross screwdriver
Components
| x1 | 803+10+12mm |
|---|---|
| x4 | 681+105+12mm |
| x1 | 803+10+12mm |
| x2 | 720+479+3mm |
| x1 | 803+168+12mm |
| x1 | 860+190+12mm |
Hardware
| Ax3 | Bx20 | Cx22 | Dx18 | Ex16 |
|---|---|---|---|---|
| Fx6 | Gx6 | Hx2 | Ix8 | Jx1 |
Assembly Instructions
Using a screwdriver, screw in the #B screws securely. Please do not over- tighten as it may cause wood to split. The small arrow on the #C Cam Locking Screw should be facing the #B screws extending from the panel. Use screwdriver to tighten securely but avoid over-tightening, screws may protrude through the panel.
Assembly Steps
- Align panel with #C Cam Locking Screws and insert #B screws.
- Secure the panels together with #D Connecting Bolts.
- Install the back panels using #E Nails.
- Ensure the side panel is perpendicular to the back panel and secure with #F Dowels.
- Verify that panels 9 & 10 are on the same level when moving or the screws may protrude through the panels.
- Attach the top panel with #G Screws.
- Insert the #H Wood Plugs into the exposed holes.
- Complete the assembly by installing the #I Feet.
Keep the panels 9&10 on the same level when moving or the screws may protrude through the panels.
Specifications
| Component | Size (mm) | Quantity |
|---|---|---|
| Panels | Various Sizes | 6 |
| Hardware | N/A | Various Quantities |
FAQ
What should I do if a panel is missing?
Double-check the package contents and verify against the instruction manual. If a panel is indeed missing, contact the manufacturer for a replacement.
How tight should I fasten the screws?
Screws should be tightened securely but not over tightened to avoid damaging the wood or causing screws to protrude through the panel.
Can I assemble this product alone?
While it is possible to assemble the product alone, having an additional person may make the process easier and quicker.
What if I make a mistake during assembly?
If a mistake is made, carefully disassemble the affected section and reassemble correctly. Refer to the instruction manual for guidance.