VORTICE P101 Exhaust Fan Instruction Manual
- June 1, 2024
- VORTICE
Table of Contents
VORTICE P101 Exhaust Fan
Dimension
PRODUCT SPECIFICATIONS
Exhaust Fan P101
Exhaust Fan P102
Exhaust Fan P103
Exhaust Fan P105
INSTALLATION METHODS
Wall-Mounted Installation (A: EVA Foam Adhesive Installation)
- A. Drill a hole in the wall.
- B. Insert the bottom of the exhaust fan into the hole to complete the installation (can be secured with glue or placed with 2 pieces of self-adhesive EVA foam).
Wall-Mounted Installation (B: Screw Installation Method
- A. Align the screwdriver with the opening, gently pry open, inserting it about 1.6 inch (4cm) 40mm.
- B. Apply quick and forceful forward pressure
- C. Insert the corrosion-resistant base into theinstallation hole, and mark the screw positions for installation
- D. Drill screw holes at the marked positions and insert plastic plugs.
- E. Install the base into the installation hole and tighten the screws.
- F.Cover with the panel, and installation is complete
Glass Window Installation Method
- A. Drill a hole in the glass.
- B. Fit the gasket around the edge of the glass hole.
- C. Insert the unit into the glass window installation hole, and installation is complete (it is recommended to use glass adhesive for better unit stability).
Ceiling-Mounted Installation
- A. If the ceiling is a thin aluminum ceiling or plasterboard that cannot support the weight of the unit, it is recommended to use a wooden board for added support
- B. Drill holes in the ceiling.
- C. Use screws to secure the unit to the ceiling.
- D. Connect the flexible hose to the bottom, cover with the panel, and installation is complete
CAUTIONS
- Don’t install the fan into a place where it would be exposed to water splash, poisonous gas, excess vapor or high temperature.
- Avoid the air back into the room through the open flues or other open-flames appliances.
- Allows use of neutral detergents to remove grease. Never use water above 60℃, petroleum, benzene, thinner or any other such organic solvent to clean. Don’t allow water to enter into motor.
- If the supply cord damage, must be replaced by staff specialist from the maintenance department of the manufacturer or specialized electrical personnel, using a specialized cord or from the manufacturer or maintenance department.
- Please keep equipment away from children.
MAINTENANCE
- Switch off the power first.
- Remove the fan cover, blade, and other parts, and wash them in water using a brush. Use a soft cloth to wipe off grease with a neutral cleanser. Never use water hotter than 60℃, petrol, benzene, thinner, or any other organic solvent to clean. Do not allow water to enter the motor.
- Dry the cleaned parts naturally or with a soft dry cloth. Then reassemble them.
- Within the warranty period, and under normal operation, any malfunction caused by the manufacturer can be repaired or replaced free of charge.
Thank you for purchasing our exhaust fan. Please read the manual carefully before use and keep it properly for future reference. If you have any problems with our exhaust fan, please contact us without hesitation. We will solve your problems as soon as possible.
Email：w16675365667@outlook.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>