Kasa KP125M Smart Wi-Fi Plug Slim User Guide

: June 14, 2024
: KASA

Table of Contents

KP125M Smart Wi-Fi Plug Slim
Introduction
Appearance
Set Up Your Smart Wi-Fi Plug
Set Up Your Device via Matter
Set Up via Matter
Authtication
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Guide
Kasa Smart Wi-Fi Plug Slim, Energy Monitoring

KP125M Smart Wi-Fi Plug Slim

About This Guide
This guide provides a brief introduction to Kasa Smart Wi-Fi Plug Slim, Energy Monitoring, Matter and regulatory information.
Please note that features of Kasa Smart Wi-Fi Plug Slim, Energy Monitoring, Matter may vary slightly depending on the model and software version you have, and on your location and language. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.

Conventions
In this guide, the following convention is used:

Convention	Description
Teal	Key information appears in teal, including management page text such as

menus, items, buttons and so on.
Underline| Hyperlinks are in teal and underlined. You can click to redirect to a website.

More Info

Operating temperature, storage temperature, and other specifications can be found on the product page at https://www.tp-link.com.
Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support/.
A TP-Link Community is provided for you to discuss our products at https://community.tp-link.com.

Introduction

Kasa Smart Wi-Fi Plug Slim with Energy Monitoring is a compact home device that turns your typical electrical wall outlet into a controllable, customizable and multi-functional outlet. Keep track of your energy use and know which one is most power-hungry. Reduce unnecessary energy loss and lower your electric bills with the schedule and timer. Enable you to easily control your lights and household electronic devices via Kasa Smart app on your iOS or Android devices, no matter where you find yourself.

Matter Certified — Integrate KP125M into any certified platforms and control the plug via multiple systems at the same time.
Energy Monitoring — Offers more intuitive data visualizations and supports setting electricity rates to estimate energy bills.
Auto-Off Timer — Each time the connected device is turned on, the countdown starts and device will turn off automatically when the time runs out.
Schedule — Turn on and off connected device automatically at a specific time.
Timer — Set a one-time countdown timer to turn off connected device
Compact Design — Mini-sized to avoid blocking adjacent sockets.
Voice Control — Compatible with Matter-certified voice assistants and use simple voice commands to control the smart plug.
Remote Control — Use Kasa Smart app to control the smart plug at anytime from anywhere.

Appearance

Smart Wi-Fi Plug Slim has a control button to turn on/off devices plugged in, and LED to show you the current status. For detailed information, see the explanation below:

Button

Press for 1 second| Turn the plug ON or OFF.
Press and hold for 5 seconds until the LED flashes amber and blue alternately| Reset Wi-Fi while keeping previous settings.
Press and hold for 10 seconds until the LED
flashes amber rapidly| Factory reset the plug.
LED

Set Up Your Smart Wi-Fi Plug

Follow the steps below to set up your smart plug via Kasa Smart app.

Install Kasa Smart app
Get the Kasa Smart app from Google Play or the App Store, or scan the QR code below to download it.
http://www.tp-link.com/common/promos/app_kasa.html?ref=QRCode
Log in or sign up with TP-Link ID
Open the Kasa Smart app and log in with your TP-Link ID. If you don’t have an account, create one first.
Add Device
Tap the button in the Kasa Smart app, select Add a Device >Smart Plugs and choose your model. Then follow step-by-step app instructions to complete the setup.

Set Up Your Device via Matter

Visit
https://www.tp-link.com/support/faq/3520/

Matter setup in different ecosystems
Multi-admin setup and videos
Features supported in different ecosystems
Troubleshooting & Help

Set Up via Matter

This is a Matter-certified device. You can integrate it into any Matter ecosystem you prefer for easy control.
Before You Start

Factory reset your device before setup.
A Matter-supported controller and smart home app of the same ecosystem are required. For optimal performance, please update them to the latest version.
The Matter setup code on the device is only applicable for the initial ecosystem. To add it to a new ecosystem, you will need to generate a new setup code from a smart home app of an already-established ecosystem in your home.
Take a photo of the Matter setup code for backup.
Bluetooth will be turned off 15 minutes after the device is powered up. Restart your device to re-enter setup mode.

How to Set Up
*Setup processes may vary between ecosystems.

Turn on Bluetooth on your phone.
Open the smart home app, then scan the Matter QR code or enter the provided numeric setup code (usually can be found on your device).
Follow the instructions in the app to complete setup.

Failed to Set Up?

Try to connect your phone to a stable 2.4 GHz Wi-Fi network with internet access instead of a 5 GHz network.
Restart your device, controller or phone.
Make sure IPv6 is enabled on your router.

Matter is still developing and the progress of each platform may differ from one another. There may also be different device performances and bugs that have no relation to the device itself. TP-Link is working hard to optimize user experience with other CSA members to provide better services.

We have professional Technical Support and R&D team. If you have any questions, feel free to contact us. Your feedback matters!

Contact us at
www.tp-link.com/support
for Technical Support, FAQs & more

Authtication

FCC compliance information statement

Product Name: Kasa Smart Wi-Fi Plug Slim, Energy Monitoring, Matter
Model Number: KP125M
Responsible party:
TP-Link USA Corporation
Address: 10 Mauchly, Irvine, CA 92618
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6804
E-mail: [email protected]
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2022-06-21

Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s).
Operation is subject to the following two
conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements
NCC Notice

Safety Information

Keep the device away from water, fire, humidity or hot environments.
Do not attempt to disassemble, repair, or modify the device.
Do not use the device where wireless devices are not allowed.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Devices of the same or another type not be stacked in normal use.
To reduce the risk of electric shock – Use only indoors.
The devices are not intended for use in locations where the temperature may be less than actual room conditions, such as unheated warehouses or garages.
Do not overload power outlets. This can result in the risk of fire or electric shock.
Completely insert the product into the power outlet. Failure to do so may cause electric shock and / or excessive heat resulting in fire.
Unplug from the power outlet if it emits smoke, has an abnormal smell or makes an unusual noise.
Do not use the product if the casing has been broken. Danger of electric shock.
Never touch the product with wet hands.
Do not use this product at a refueling point.
Observe restrictions on using wireless products in fuel depots, chemical plants or when blasting operations are in progress.
Never put metal objects inside the product. If a metal object enters the product turn off the circuit breaker and contact an authorized electrician.
Be careful to connect the following
– cooking appliances, irons, other devices that generate a large amount of heat. There is a risk of fire, burns or injury.
– power tools, electric machinery, or other devices that could cause injury and therefore must be used under direct careful observation.
– heating or cooling devices or any type of device which could cause health risks particularly to the elderly or children.

CAUTION
Electrical switch integrated in this product is only intended for functional purposes.
Unplug the appliance before servicing.

Supported load types
Heater: ≤1500 W Humidifier: ≤260 W Toaster: ≤850 W Tower Fan: ≤50 W Iron: ≤1500 W
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.

Operating Temperature: 0 ºC~ 40 ºC (32°F ~ 104°F )
Storage Temperature: -40 ºC~ 70 ºC (-40°F ~ 158°F )

Explanation of the symbols on the product label

| AC voltage
---|---
| Indoor use only
| Switch of micro-gap / micro-disconnection construction
| RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.