DDPAI Mini Pro Dash Camera User Guide
- June 14, 2024
- DDPAI
Table of Contents
DDPAI Mini Pro Dash Camera
SPECIFICATIONS
- Product Name: Dash Cam
- Product Model: mini Pro
- Input: SV 1A
PACKAGE CONTENTS
3M Adhesive
User Guide
USB Charger
Dash Cam
3.Sm Vehicle Power Cable
Installation Too
PRODUCT OVERVIEW
| 1micro USS Port | 6Rotating Shaft |
|---|---|
| 2 Reset Key | 7 3M Adhsive Pad |
| 3SD Card Slot | BM I C |
| 4M ounting Bracket | 9Loadspeaker |
| SLED Indicator |
LED INDICATOR INSTRUCTION
| N ame | D escript io n |
|---|---|
| Working fine | Red light flashs slowly |
| Booting | Red light is always on |
| Storage abnormal / working abnormally | Purple light flashs quickly |
| Parking monitoring | Blue light flashs slowly |
| USBdata transmission mode | Blue light is always on |
| Upgrading | Purple light is always on |
INSTALLATION
-
Clean an area on the windshield where you wish the Dash Cam to be installed, this assists in adhesion.
-
Remove the protective film from the back of the bracket. attach the adhesive side of the mount on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view. As shown below.
-
Use the installation tool to lift the edges of the windshield/molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable.
-
Turn on the engine after installation, you will hear a boot t one, the Dash Cam powers up and starts recording, meanwhile, an LED indicator will blink slowly in normal mode.
-
Adjust the angle of the lens by rotating the Dash Cam. We recommend pointing the lens slightly down wards (≈10° below horizontal), so as to record video with a 6:4 road to background ratio. It is recommended to adjust the Dash Cam position while looking at the screen to select the best viewing angle.
APP INSTRUCTION
Install DDP Al APP
Scan the QR code to download the “DDPai” APP .
Pair Smart Phone to Dash Cam
- Keep the Dash Cam and mobile phone within 2.5 meters.
- Launch DDPAI App, tap on “Device> Connect new devices”.
- Choose your DDPAI Dash Cam from the network list(For Android system, App will start to search Dash Cam network automatically. For iOS phone: turn on WLAN from “Settings ->WL AN”). The Dash Cam’s default SSID (or Wi-Fi name) is DDP ALmini_ XXXX.
- Enter the password (the default password is ‘1234567890’).
- Enter DDPAI App, wait a few seconds until the preview screen show.
Preview
- 0pen the DDPAI App, and add your Dash Cam.
- Select “Device> Entering” tab, this will bring you to the preview page.
Rotate your smart phone or press expand icon, turn
the preview screen to landscape mode.
Playback
Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to preview, then tap on thumbnail when you have made your selection, or wait for 5 sec for buffering, now you can watch the history recording.
Download Video Files
- Tap and left/right drag timeline bar at the screen bottom to create the starting point of the recording you wish to download, then tap on thumb nail when you have made your selection, or wait for 5 sec for buffering, to enter the download start screen.
- Tap on from preview screen to enter the download interface.
- After the video has finished downloading, click ·complete.
CONTACT
feedback@ddpai.com
DDPAI Technology Co., Ltd
Floor 12, Yihua finance building, Software park, Yuehai Sub district, Nanshan
district, Shenzhen
For more information and FAQs, Please scan the QR code
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>