BOWER WA-CSB100 Comfort Camera Strap User Manual
- June 15, 2024
- BOWER
Table of Contents
BOWER WA-CSB100 Comfort Camera Strap
Product Information
Adjustable camera strap designed for DSLR/Mirrorless cameras.
- Adjustable length: 34-49 in.
- Strap width: 2 in.
- Maximum weight capacity: 33 lb.
- Material: SBR
Product Usage Instructions
- STEP 1: Attach the strap securely through the camera eyelet. Make sure to leave enough slack in the buckle area to thread strap end through.
- STEP 2: Pull both ends to remove the remaining slack on the strap. Repeat the process from the beginning on the opposite side.
- STEP 3: Thread strap end through slider piece. Then thread through top opening on the buckle.
- STEP 4: After threading the strap end through the top opening on the buckle, thread it through the bottom opening on the buckle.
Note: The slider and buckle pieces may have to be removed from the strap and repositioned for proper attachment as illustrated in this manual.
Please note that the camera itself is not included with this product.
Specification
- Adjustable length: 34-49 in.
- Strap width: 2 in.
- Maximum weight capacity: 33 lb.
- Compatibility: DSLR/Mirrorless cameras
- Material: SBR
INSTALLATION INSTRUCTION
-
STEP 1:
Attach the strap securely through the camera eyelet. Make sure to leave enough slack in the buckle area to thread the strap end through.
NOTE : The slider and buckle pieces may have to be removed from the strap and repositioned for proper attachments illustrated in this manual. -
STEP 2:
Thread strap ends through slider piece. Then thread through the top opening on the buckle.
-
STEP 3:
After threading the strap end through the top opening on the buckle, thread through the bottom opening on the buckle.
-
STEP 4:
Pull both ends to remove the remaining slack on the strap. Repeat the process from the beginning on the opposite side.
Warranty
LIMITED One (1) Year Limited Warranty
S. Bower Inc.™ One (1) Year Limited Warranty: This warranty gives you specific
legal rights and you may have other rights which vary from state to state.
The S. Bower Inc.™ Limited Warranty is a voluntary manufacturer’s warranty
provided to the consumer. This warranty provides rights separate to rights
provided by consumer law, including but not limited to those relating to non-
conforming goods. S. Bower Inc.™ One-Year Limited Warranty benefits are in
addition to, and not instead of, rights provided by consumer law and it does
not exclude, limit, or suspend a buyer’s rights arising from consumer law.
Consumers have the right to choose whether to claim service under the S. Bower
Inc.™ One-Year Limited Warranty or under their consumer law rights. The S.
Bower Inc.™ One-Year Limited Warranty terms and conditions shall not apply to
consumer law claims, contact your local consumer organization.
Please note: All claims made under the S. Bower Inc.™ One-Year Limited
Warranty will be governed by the terms set out in this warranty document. S.
Bower Inc.™ warrants to the product owner that this product will be free
against defects in materials and workmanship for a period of ONE (1) YEAR from
the date of original retail purchase when used by S. Bower Inc.™ ’s user
manual. Under this warranty, you will be able to send your claims and
defective product to S. Bower Inc.™, via freight prepaid, along with proof of
purchase, and will be repaired or replaced, based on S. Bower Inc.™ sole
discretion. Repair and/or replacement may be made with new or refurbished
product components at S. Bower Inc.™’s sole discretion. This limited warranty
does not cover failures due to abuse, accidental damage or when repairs have
been made or attempted by anyone other than S. Bower Inc.™ personnel. A
defective product meeting the warranty conditions set forth herein will be
replaced or repaired at no charge in either of two ways: The first, which will
result in exchanges only, is to return the product to the retailer from whom
it was purchased (provided that the store is a participating retailer).
Returns should be made within the period of the retailer’s policy for
exchanges. Proof of purchase may be required. Please check with the retailer
for its specific return policy regarding time limits for returns or exchanges.
The second option is to send the product (prepaid freight) to S. Bower Inc.™
corporate offices located at S. Bower Inc. 38-09 43rd Avenue 1st Floor Long
Island City, NY 11101 for repair or replacement at S. Bower Inc.™ ’s option.
Proof of purchase is required. Include name, return address, and issues that
you are experiencing with S. Bower Inc.™ products. All other guarantees,
express or implied, are hereby disclaimed.
This warranty does not apply to products sold in countries outside of the
United States.
©2023 S. Bower, Inc. All rights reserved.
All brand names and trademarks belong to their respective owners
S. Bower, Inc. LIC, NY 11101 www.BowerUSA.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>