ZEBRONICS NBC 4S Pro Series Z Laptop User Manual
- June 14, 2024
- ZEBRONICS
Table of Contents
User Manual
NBC4S FAQ
Hardware Based
Q: What is the RJ45 LAN port speed ?
A: The RJ45 port in ZEB-NBC 4S supports up to 1 Gbps.
Q: How many USB ports are there?
A: ZEB-NBC 4S > 2x USB 3.2 , 1x USB 2.0 , 2x Type C (one for charging & other Type C 3.2 gen 1 for data & video out)
Q: How to connect a laptop to an external display?
A: ZEB-NBC 4S > use HDMI to HDMI cable and connect it to the required Display. Note: Type C port can be also used for display output.
Q: Can I expand the storage? What is the maximum Capacity?
A. ZEB-NBC 4S > an additional 2.5 inch SATA SSD/HDD can be Installed with a maximum of 1TB. Note - It is recommended to take the laptop to the authorized service center for storage upgrade.
Q: Is the RAM upgradable ? What is the maximum Capacity?
A: ZEB-NBC 4S > 2 channel DDR4 with maximum memory of 64GB (two sticks of 32GB) Note - It is recommended to take the laptop to the authorized service center for RAM upgrade.
Q: Does it support 4k in the HDMI port?
A: Yes, The Laptop supports 4k with HDMI at 60Hz.
Software Based
Q: What is the Default out of the box OS?
A: Windows 11 Home
Q: how to check if a software is supported by our laptop ?
A: Kindly refer to the software’s website to check the recommended specifications to run the software.
Q: Is this good for a full stack developer?
A: Yes. Works fine.
Q: Support For Adobe photoshop?
A: Yes
Q: Is this suitable for trading purposes...?
A: Absolutely yes.
Q: Does it have a pre-installed MS Office ?
A: No
Q: Can It run MS Word, Excel, Power Point ?
A: Yes
BIOS FAQ
Q: How to enter the BIOS ?
A: Turn ON the computer. Wait until the boot screen appears, then press ESC key continuously until it enters the BIOS menu.
Q: How to Boot the system from a USB flash drive ?
A. Plug in your Bootable Pen Drive. Under the Boot Overdrive option select the USB drive you want to boot. On the BIOS menu, navigate to the “Save and Exit” section. Press Enter.
Q: How to Enable/Disable “Secure Boot” ?
A: On the BIOS page, navigate to “Security” Tab Click on “Secure Boot” option Select Enable/Disable as per preference.
Q: How to restore BIOS settings ?
A: On the BIOS page, navigate to “Save and Exit” Tab Proceed with the “Restore defaults” setting.
Q: How to contact for service and support ?
A: Website - https://zebronics.com/pages/contact-us Register product - https://warranty.zebronics.com/ Service centers - https://zebronics.com/pages /service-centres Whatsapp - +919363453681 Email - [email protected]