Amucolo DHS-CYHF-35GS Electric Tower Ceramic Fan Space Heater Fan Instruction Manual

Amucolo DHS-CYHF-35GS Electric Tower Ceramic Fan Space Heater Fan

Security Considerations

Please read this manual before using this product all the instructions and warnings When using this product, should follow the basic preventive measures, including the following:

Warning
In order to prevent fire, electric shock or burns, please pay attention to the following content:

1. machine use warm wind outlet mode after a certain time will be fever, in order to avoid scald, please don’t direct contact
   with the outlet. When moving the product at the bottom please, instead of the outlet.

2. Please put flammable objects (such as furniture, pillows, bedding, paper, clothes, curtains, etc.) are placed in from this product at least 0.9 meters (3 feet) and from both sides of the hole opener and back.

3. When children or the weak, also need careful attention when using or close to the machine, when they should at runtime in the machine.

4. This kind of machine is not suitable for children and the remote control and the weak, such as body function, senses, reasoning) or lack of experience and knowledge, unless they are in the ability of the users under the guidance of oversight or use it safely.

5. When machines use, please pay close attention to young children close to and contact. Don’t play as only use, children should be supervised, to make sure they don’t play machine or remote control.
   stand must be installed before running safely, please do not disassemble or in front of the stand did not complete the installation.

6. Only suitable for use in a dry place, do not use in outdoor or wet environment. Please don’t in the bathroom, laundry area and similar indoor places. Don’t put the machine in use is likely to fall into the water, such as water bath tub or other container. Do not use or store in May to wet places, such as the bathroom, the bath or swimming pool.

7. Machine parts have become warm. Don’t have gasoline, paint, the use of flammable liquid, and cannot be used where there is vapor deposit or. Don’t directly with air freshener or similar products.

8. Don’t put in under the power supply socket.

9. directly inserted into the socket on the wall. Do not prolong machine wire service, because may lead to wire overload overheat and burst into flames.

10. don’t use wet hand contact plug any part of the machine.

11. Do not pull wire and pull out the plug. Please hold the plug pulled out, not wire.

12. Do not push pull wire, make its force. Don’t put the wires placed under the carpet. Don’t put the wire under treadmill or similar items. Don’t put the wire under furniture or appliances. To avoid tripping, please wire placed inside area away from walking, so that will not be tripped.

13. Do not use damaged wire or plug, if the power cord is damaged, must is alive and well or its agent or similar qualified personnel replacement, thank you for your cooperation.

14. want to turn off the machine when not in use, turn the power off, and then pull out the plug of the machine from the socket.

15. If the machine malfunction and damage are not under the condition of use. Please come to have authorized institutions for inspection/repair maintenance.

16. In order to prevent may cause fire, stuck in the front or exhaust, all can’t use, and keep in the absence of dust, cotton wool and hair condition. Don’t put anything into the intake and exhaust outlet, because this may lead to electric shock or fire, or damage to the machine.

17. Don’t use in a soft surface, such as bed, due to the vent may be blocked.

18. Used only in accordance with the operating manual, operation manual is not recommended to use beyond description, due to may cause fire, electric shock or personal injury.

19. In order to avoid for heat and fire risk, not covering machine use.

20. Choking hazard: remote controls contained within a small battery, please send the remote control away from the children, to avoid the child swallowing batteries. If the battery is swallowed seek medical advice immediately, please.

21. The machine should be far away from the wall or place in the corner of the room.

22. If the power cord damage, in order to avoid danger, must by the manufacturer or its maintenance department or similar professionals to change.

Important safety instructions
Overturned, for your safety, if the machine or overheating. Please turn off the power and unplug machine plug, let it cool. before the reboot the machine, please check and remove any obstacles, and make sure the machine when placed on a solid flat surface.

Read and store the operating instructions
This appliance is only suitable for household use.

Product parts is introduced

1. The left outlet
2. The right outlet
3. The control panel
4. Photographs
5. Rotate the base
6. MATS
7. Mesh plate
8. Switch,
9. The power cord plug

The control panel

Instructions

Please check the rated voltage in household electrical appliances parameters, under the power output of 110V ~ 60Hz.

Power switch
Gently touch the switch button of the display panel, or press the remote control power on key, all function indicator lights will be on, and the corresponding function will be on;

Degerming mode:
Gently touch the sterilizing button on the display panel or press the sterilizing button on the remote control. When the sterilizing button is turned on, the plasma switch will be turned on synchronously. At this time, the lamp ring will light up and change color according to the air quality (red-yellow-blue-green).

Air quality monitoring lamp
Turn on the air clean (plasma) switch

1. When the red light is on, the air quality is very poor;
2. when the yellow light circle is bright, the air quality is general;
3. when the blue light circle is bright, the air quality is very good;
4. When the green light is on, the air quality is good.

Shaking head pattern:
Gently touch the shake head button on the display panel, or press the shake head button on the remote control to turn on the left and right shake head. Shake head Angle 55 degrees, press again, exit shake head operation;

Sweet remind
After the shutdown, it will remember the position of the head before the shutdown. Do not force to manually adjust the position to avoid machine failure.

Heating mode:

1. light touch display panel heating button, or press the remote H M L control. heating button (including three corresponding H3H2, H1 3), the product into the heating condition, display panel display real-time temperature;
2. according to the heating button again transform back to the cool wind model;
3. will automatically be on standby, when the temperature reaches 35 ℃ temperature drop 27 ℃ to automatically open warm wind model.

Timing mode:
Gently touch the timing button on the display panel, or press the timing button on the remote control, and the function of 1-12 hours timing can be realized. Other functions can be used normally after the timing function is set; When the power switch is off, the timing setting will be cancelled. When the timing time is up, the machine will stop running. If you need to restart, please press the switch button again.

Air volume mode:
Adjustment range of air volume is 1-10. Press the air volume button on the display panel or press the ” “button on the remote control to increase the air volume of the fan, and press the” ” button on the remote control to decrease the air volume of the fan.

Night mode:
Used to control the digital screen all lights, when open the back to the night mode button will close all the lights, other function normal operation;

1. built-in function of anti dumping machine, warm wind model, when dumping equipment, equipment shut down automatically warm wind function;
2. Equipment set up 3 heavy security protection function (software/temperature control switch power fuse fuse)
3. 20 seconds PTC temperature reaches set temperature;
4. This equipment is designed the function of the disassembly, equipment abnormal contact customer service personnel.
5. If do not use the fan for a long time, please pull the plug.

About remote control

• Remote control battery button batteries are set up during factory shipment. Unplug the insulation tag before use.

  • Because the product is originally attached to the button battery is used for testing. Shorter battery life than the new ones.

• Replace the battery.
  The paw of the battery component on the back of the remote control presses the component in the direction of the arrow.

• After the button battery (+) is set up, please make a (khaki) sound until the battery holder is fully embedded.

Be Careful

• Please pay full attention to the positive and negative signs of the battery to set.

• When the remote controller is not used for a long time, in order to prevent leakage, please remove the battery from the remote controller.

• In case of battery leakage, please wipe off the leaking liquid and set up a new battery.

• Please do not put the battery into the fire. Also, it is dangerous to short-circuit, decompose or heat them. Never do this.

• If the battery is exhausted and the operating distance is shortened, please replace the battery as soon as possible.

  • Operating model
    The luminous part of the remote control should be oriented towards the receiving part of the product remote control. Operating distance from straight line is about 5m.

  • TV or audio remote control, etc. when used, there is a rare product reaction of action. This is caused by the same frequency as this product. In that case, use it where the product is not affected.

Maintenance and cleaning methods

• Before cleaning, servicing or removing the product, turn it off and remove the power plug.
• If there are stains on the outside of the body, use neutral detergent to wipe with wet cloth, and then use soft cloth to wipe clean.
• Do not soak the power cord or the main machine in water to clean or flush it under the faucet. Do not touch the internal parts of the fan with water.
• Do not use detergent, wire brush, gasoline, alcohol, vinegar or other volatile corrosive liquid cleaning products to avoid damage to the product.
• Clean the surface of the fan with a damp cloth.
• After cleaning, the product must be completely dry before connecting to the power supply.
• If not used for a long time, please put the product back in the box and store it in a dry, cool and safe place.
• It is recommended to wipe the surface with a dry towel to avoid water droplets entering the machine.
• Built-in removable HEPA+ activated carbon net, it is recommended to replace it once every 6 months. If the environment is bad, it is recommended to replace it once every 3 months;

Note: the filter can not be cleaned, can only be replaced regularly.

Parts replacement guide

• Insert the filter element first, and then cover the filter element surface.
  Note: When the filter element is inserted, the activated carbon is inserted with the face up and the HEPA filter paper is inserted with the face down.

Fan parameters

Packing list

Electric schematic diagram

PTC ceramic heater

Product failure analysis

Unable to boot

| The power cord is not plugged in correctly.| Replug the power cord into the power supply.

The product fuse has blown.

| Contact designated maintenance agency.

The power cord is damaged.

| Contact designated maintenance agency.
Abnormal noise occurs during use|

internal structure damage.

|

Reinstall the nose assembly.

Wind speed reduction

|

filter dust blocking.

| Clean/replace the filter consumables on both sides of the machine air inlet.

The remote controller does not work sensitively

| The remote controller battery has reached its service life.| Replace the battery of the remote controller.
The remote control battery is not properly installed.| Check whether the positive and negative poles of the battery are correct.
Remote control is too far away.|

Use close to the machine.

Display screen appears “E1”

| over voltage protection of power supply| contact the designated maintenance organization.

Display screen appears “E2”

|

motor blocking protection

| contact the designated maintenance organization.

Environmental instructions

Name and content description of the harmful substance in the product

• This product meets the requirements of “Administrative Measures for Restrictive Use of Hazardous Substances in Electrical and Electronic Products”
• During the period of environmental protection use, there will be no harmful substances leakage, precipitation and other problems affecting the health of consumers in the normal use process, so it can be safely used
• The environmental protection use period of our products is 10 years. The “environmental protection use period” is valid only when the product is used under normal conditions as described in this manual

Name and content identification of toxic and harmful substances or elements

Product warranty card

1. This product is guaranteed by the whole machine. The warranty period is one year, starting from the date of issuing product invoice or shopping voucher.
2. During the warranty period, any performance failure caused by the quality of the product itself, please customers with the filled warranty card and shopping voucher to the designated maintenance points for free repair.
3. Please keep the purchase invoice or voucher properly.

No free repairs are allowed under the following circumstances

1. Give up the warranty card and valid invoice or shopping voucher.
2. The invoice model is inconsistent with the model of the maintenance product or has been altered.
3. Failure to operate the machine according to the instructions.

Product information:

Product name|
---|---
Product model|
Purchase date|
Buy site|
|

maintenance record:

Discarded related matters
Polystyrene foaming materials are combustible materials, the waste refrigerator should be isolated from the fire source, can not be burned treatment. Please submit it to a qualified professional recycling company for processing. To avoid environmental hazards or other hazards.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>