Langmuir Systems MR-1 Lift Kit Installation Guide
- July 9, 2024
- Langmuir Systems
Table of Contents
Langmuir Systems MR-1 Lift Kit
MATERIALS
Parts
- (2) Forklift Bracket
- (8) Leg Braces
Hardware
- (28) SOCKET HEAD CAP SCREWS, ¼-20 X 1”
- (28)¼-20 FLANGE NUTS
- (8) ¼” WASHERS
Tools
- 3/16” Hex Key
- 7/16” Wrench
- ¼” Drill Bit
- Hand Drill
Instructions
- A1. Bolt two Leg Braces together to form an X. Repeat 4 times.
- A2. Align the larger end holes on a set of Leg Braces with the Leveling Foot holes at the base of the MR-1 Legs.
- A3. Bolt the Leg Braces to the Leveling Foot holes, using either the Leveling Foot bolts or two of the provided ¼-20 SHCS with washers and flange nuts.
- A4. Using the installed Leg Braces as a guide, drill through the Leg of the MR-1 to create two ¼” mounting holes for the top of each Leg Brace. Fasten the top of each brace to the leg, and repeat for all 4 sides of the machine.
- A6. Install the Forklift Brackets as shown.
FAQs
- Q: What should I do if I encounter difficulties aligning the Leg Braces with the Leveling Foot holes?
- A: If you face alignment issues, double-check the positioning and ensure that the Leg Braces are securely fastened before proceeding with installation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>