TANCHJIM 2A7T2MINO Wireless Earbuds User Guide
- June 15, 2024
- TANCHJIM
Table of Contents
TANCHJIM 2A7T2MINO Wireless Earbuds User Guide
To enter pairing mode, make sure that your phone’s Bluetooth mode is turned on in advance Bluetooth
Then open the charging box, you will find the lights on the earphones breath(shine) slowly, the earphones are under pairing mode.
Enter system settings on your phone and find TANCHJIM -Mino in Bluetooth page for connection. Usually you can find it in System – Settings – Bluetooth.
Upon successful connection, the lights turn white for 3 seconds and shut automatically for power consumption. 3 3 .
If the connection fails,
the breathing light will go off, please try again following the the previous
steps. 3 . .
Open or close the top cover of the charging case to see the remaining power (indicated by the lights)
When charging, the charging box displays the current battery status and the
indicator light flash slowly. .
Once the battery is fully charged, the light of the charging box will be lit
on in white. .
Usage
- Triple-tap the touch pad on the earphone for voice assistant, and triple-click again to exit.
- Tap the touch pad on any side of the earphones to answer a call; Double-tap to end the call/reject.
- Tap the touch pad on any side to play/pause the music.
- Double-tap the touch pad on the right earphone for the next song, and double-tap the one on the left for previous song.
- To reset the pairing status, long press the touch pad either side for 5 seconds, the earphones will sound a prom
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>