SEALEY HVD36 DRUM FAN 36 230V Instructions

SEALEY HVD36 DRUM FAN 36 230V

ELECTRICAL SAFETY

1. WARNING! It is the responsibility of the owner and the operator to read, understand and comply with the following: You must check all electrical products, before use, to ensure that they are safe. You must inspect power cables, plugs, sockets, and any other connectors for wear or damage. You must ensure that the risk of electric shock is minimized by the installation of appropriate safety devices. A Residual Current Circuit Breaker (RCCB) should be incorporated into the main distribution board. We also recommend that a Residual Current Device (RCD) is used. It is particularly important to use an RCD with portable products that are plugged into a supply that is not protected by an RCCB. If in any doubt consult a qualified electrician. You may obtain a Residual Current Device by
   contacting your Sealey dealer. You must also read and understand the following instructions concerning electrical safety.

2. The Electricity at Work Act 1989 requires all portable electrical appliances, if used on business premises, to be tested by a qualified electrician, using a Portable Appliance Tester (PAT), at least once a year.
   WARNING:  The switch on this fan has components fitted to protect it against a possible voltage surge. When carrying out
   regular appliance checks, a voltage no higher than 250V should be applied for the purposes of insulation testing.

3. The Health & Safety at Work Act 1974 makes owners of electrical appliances responsible for the safe condition of those appliances and the safety of the appliance operators. If in doubt about electrical safety, contact a qualified electrician.

4. Ensure that the insulation on all cables and on the appliance is safe before connecting i to the power supply. See 1.1.1. and 1.1.2. and use a Portable Appliance Tester.

5. Ensure that cables are always protected against short circuits and overload.

6. Regularly inspect power supply cables and plugs for wear or damage and check all connections to ensure that none are loose.

7. Important: Ensure that the voltage marked on the appliance matches the power supply to beused and that the plug is fitted with the correct fuse – see fuse rating at right.

8. DO NOT pull or carry the appliance by the power cable.

9. DO NOT pull the plug from the socket by the cable.

10. DO NOT use worn or damaged cables, plugs, or connectors. Immediately have any faulty item repaired or replaced by a qualified electrician. When an ASTA/BS approved UK 3-pin plug is damaged, cut the cable just above the plug and dispose of the plug safely. Fit a new plug according to the following instructions (the UK only).
    a) Connect the GREEN/YELLOW earth wire to the earth terminal “E”.
    b) Connect the BROWN live wire to the live terminal “L”.
    c) Connect the BLUE neutral wire to the neutral terminal “N”.
    d) After wiring, check that there are no bare wires, that all wires have been correctly connected, that the cable outer insulation extends beyond the cable restraint, and that the restraint is tight.
    Double insulated products, which are always marked with this symbol, are fitted with live (brown) and neutral (blue) wires only.
    To rewire, connect the wires as indicated above – DO NOT connect either wire to the earth terminal.

11. Products that require more than 13 amps are supplied without a plug. In this case, you must contact a qualified electrician to ensure that a suitably rated supply is available. We recommend that you discuss the installation of an industrial round pin plug and socket with your electrician.

12. If an extension reel is used it should be fully unwound before connection. A reel with an RCD fitted is preferred since any appliance plugged into it will be protected. The cable core section is important and should be at least 1.5mm², but to be absolutely sure that the capacity of the reel is suitable for this product and for others that may be used in the other output sockets, we recommend the use of 2.5mm² section cable. If the extension reel is to be used outdoors, ensure it is marked for outdoor use.

GENERAL SAFETY

• WARNING: If the fan falls into water or other liquid, immediately switch off and disconnect from the mains power supply. Do not touch the fan until the mains power supply has been disconnected.
• DO NOT stand the fan on its electrical power cable.
• DO NOT insert any objects through the fan guard.
• DO NOT cover the fan when in use.
• DO NOT immerse the fan in water or any other liquid.
• DO NOT allow children to operate the fan.
• DO NOT stand the fan where it may be knocked over or off a surface, or where the lead may cause a person to trip.
• DO NOT use the fan outdoors.
• DO NOT use an extension cord unless it has been approved by an electrical authority.
• DO NOT modify speed control or attempt to fit any additional external speed control device to the fan.
• DO NOT operate the fan where there are harmful, explosive, or flammable gases, fumes, or hazardous substances.
• When not in use place the fan in its original box, or otherwise cover the fan to protect it from dust and store it in a safe, dry, childproof location.
• Use recommended parts only, unauthorised parts may be dangerous, and will invalidate your warranty.
• Always disconnect the fan from the power supply when moving it from one location to another and ensure the fan is stood on a level surface.
• The fan airflow is powerful. Before using ensure there are no materials or items that may be moved by the stream of air.
• Keep the fan clean and maintained in good condition. For electrical components or motor service contact an authorized service agent.
• disconnect the fan from the mains’ power when not in use, and before servicing or performing any maintenance.
• Use the fan in dry areas only. Do not use in wet or areas with high condensation such as showers, pools, etc.

INTRODUCTION AND SPECIFICATION

High-velocity industrial two-speed drum fan suitable for movement of huge volumes of air. Robust unit with heavy-duty steel casing, guard, and frame. Wheels and handle for easy maneuverability. Carefully balanced and fully guarded blades provide quiet and safe operation. Suitable for use in industrial, commercial, agricultural, and automotive workshop and showroom applications.

• Fan Diameter: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 915mm(36″)
• Speeds: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 735/940rpm
• Maximum Airflow:. . . . . . . . . . . . . . . . . . . . . . . . . . . 258mtr³/min
• Motor: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V – 50Hz – 260W
• Current: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4A

OPERATION

WARNING! Ensure you read, understand and apply the safety instructions in Chapter 1 before using the fan.

1. The fan is easily transportable by means of the wheels provided. Lift by the handle on the main body of the fan on the side opposite the wheels and maneuver the fan into position. Ensure that there is nothing in front of the fan that may be disturbed when the fan is switched on.
2. Check that the speed control box situated in the recess in the rear grille of the fan is set to “OFF”. Uncoil the power lead from its stowage position and plug it into the mains power supply. Ensure that the power lead is not stretched or positioned in such a way as to cause a hazard. Switch the power on.
3. Turn the fan on by rotating the control knob from “OFF” to “LOW”. If a greater airflow is required turn the knob to the “HIGH” setting.
4. When you have finished using the fan ensure you turn the speed control switch to “OFF” and disconnect the fan from mains power.
5. Recoil the lead onto the stowage hooks situated within the recess in the rear grille

MAINTENANCE

WARNING! Ensure the fan is disconnected from the mains power supply before attempting any of the following:

1. Use a soft, damp cloth to clean the body of the fan. DO NOT splash water onto the fan and never allow water to drip onto the motor housing DO NOT use solvents, petroleum, paint thinner or other chemicals to clean the fan.
2. If it becomes necessary to clean the fan blades or inside the fan body, remove the front grille by undoing the 12 screws. Wipe with a damp cloth only. Replace the grille and re-fix using the screws.
3. Should the motor, speed control box or the power lead require service or maintenance contact your local service agent?
4. When not in use place the fan in its original box, or otherwise cover the fan to protect it from dust and store it in a safe, dry, childproof location.

Declaration of Conformity

We, the sole importer into the UK, declare that the product listed here is in conformity with the following standards and directives.  The construction file for this product is held by the Manufacturer and may be inspected, by Signed by Steve Buckle
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications, and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our catalog and latest promotions call us on 01284 757525 and leave your full name, address, and postcode

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>