TECURS MR03 RGB Condenser Microphone User Manual
- June 14, 2024
- TECURS
Table of Contents
MR03 RGB Condenser Microphone
CONDENSER
MICROPHONE
Product Model:MR03
USER MANUAL
PACKING LIST
1 x Micriophone.
1xBase
1 x Anti-wind cap
1 x Microphone Cable
1 x Microphone stand
1 x Pop Filter
3x Magic cable tie
CONTROL PANEL
- Microphone diaphragm-condenser microphone element in cardioid pickup mode.
- Wicrophone lamp with adjustment button-the color of the lamp can be adjusted in 12 RGB colors.On: color mode, monochrome rotation mode, gradient mode and blinking gradient mode. Slow flashing mode, flashing mode, pure white mode, pure orange mode Pure green mode, pure cyan mode, pure blue modePure pink mode, light-off mode.
- Microphone gain knob-Turn the knob to the left to lower the microphone.
- Volume, tum fight to increase the microphone volume. Tap to mute.
- Microphone stand-Microphone stand angle can be adjusted.
- Headphone Jack – /8 inch (3.5 mm) stereo jack for monitor your voice n real time:
- USB Output – Connect directly to your computer via the included USB cable.
- Microphone cable (the cable can be connected to a computer or mobile phone).
GUIDELINES FOR USE
- Adjust and pivot the microphone in refation to the sound source to optimize your sound quality.
- The front of the microphone should be facing the sound source.
- Maintain a distance of approximately 15-20 cm(5.9-7.9 in.) between the sound source and the microphone.
COMPUTER SETUP
Computer with USB interface or TYPE-C interface
Apple MAC OS
- Plug the free end of the provided USB cable into the USB port on your computer. ‘The microphone’s green LED willluminate, indicating the microphone on the working status. Your computer will automatically recognize the USB device and install a driver. There may be no pop- up window or message though.
- To select the “MRO3” as your audio input, first, open your System Preferences.
- Next, dlick Sound to display the Sound preference pane.
- Click the Input tab and select the “MR03″ as the device for sound input.
- Click the output tab and make certain “MRO3” is selected as the default output device. (This should have happened automatically.)
Windows
1.Input settings
Plug the USB cable into your computer. The mic’s green LED wil iluminate, mic
come of the working status.
-
Right-click the speaker icon at the bottom right of the screen. Click *Open sound settings”.
-
Select the Recording tab, and choose “MR03″ as the default device.
When you speak to mic, bar-type icon will tum green and bounce. If it remains unchanged, please reset computer and replug in the USB port. If there’s sillno “MR03″ , please contact Aokeo after service. -
Adjust input volume-Double diick the MRO3″ to open the Microphone Properties window.
Note: Make sure that the microphone gain and headphone volume knob is not
on the zero position.
2.0utput settings
Output computer audio from the microphone 3.5mm jack
- Please plug earphone in the headphone jack on the base,in the *Sound” menu, select the “playback” tab, set “MR03” is the default device.
- Click the speaker (‘MR03″ ) is being used>>Properties>>levels>>drag progress bar to adjust volume of output
Note: (Applicable for MAC and Windows)
If computer prompts that it’s unable to identify USB devices, please restart computer and replug the microphone into other USB port.
2. Ifthe microphone is recognized, but no sound comes out, please check the system sound Whether itis muted or not, and whether you have set the volume control of the microphone to the lowest level. Make sure that the led is green, indicating that the microphone is tumed on.
PHONE SETTING
-
Connect the microphone USB cable to the mobile phone. (excluding iPhone cable, packing box. TYPE-C cable is included.
The indicator light of the microphone will turn green (indicating the microphonePower on). -
Insert the earphone into the 3.5mm earphone jack of the microphone.
-
The connection is complete.
Plug and play design.You don’t have to install any software or complex settings.
Compatible with all mobile phones of 10S and Android system.
(Note: Somephones require OTG to be tumed on)
PRODUCT SPECIFICATIONS
PRODUCT DATA
- Polar Pattern: Cardioid
- Sensitivity:
- – 33:2dB (1.5V, 680KQ; 0dB = 1V /Pa, 1KHz)
- Frequency Rate: 20Hz-20000Hz
- SPL: 110dB
- SIN Ratio: 96dB
- Output impedence: <2.2KQ
- Sampling Rate/Bit depth: 192KHz/24bit
- Product model: MRO3.
- Power supply symbol: DC5V
- Rated power supply voltage or rated power supply voltage range: 5V
- Rated current consumption or rated power consumption: S0mA
- Output power: 0.5W.
Typical Frequency Response Curve Polar Response
IMPORTANT NOTICE
Setting your software levels Correct adjustment of microphone level is
important for optimum performance. Ideally, the microphone level should be as
high as possible without overloading the input of your computer. If you hear
distortion, or if your recording program shows levels that are consistently
overloaded (at peak levels), turn the microphone gain (or level) down, either
through your control panel (or system preferences) settings, or through your
recording software.
If your recording program shows insufficient level, you can increase the
microphone gain either from the control panel (or system preferences) settings
or through your recording program.
Positioning your microphone.Itis important to position the microphone directly
in line (on axis) with the person speaking! singing or instrument (or other
sound source) to achieve the best frequency response of the microphone. For
use in speaking/singing applications, the ideal placement for the microphone s
directly i front of the person speaking/singing. The same placement is optimal
when miking an instrument such as an acoustic guitar, drums or piano.
Experiment with different mic placements to find the best sound for your
particular setup.
Choose your oLtput setting. When you plug microphone to your pe, it cancels
the audio from any other audio file played or there’s no sound on the
playback, you need to manually select the “speaker (Realtek High Definition
Audio)” as the default playback device if you want to output sound via the
computer buillin speaker.
CUSTOMER SERVICE
If you have any questions about the microphone, please feel free to contact us.
Service Email:
gamesupportservice@tecurs.com
Official website: www.tecurs.com