CRYSTORAMA HAY-1405-AG 12 Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA HAY-1405-AG 12 Light Chandelier
Product Information
- Model: HAY-1405-AG
- Part Number: N/A
- Recommended Bulb Type: 12-Candelabra Base Bulb
- Recommended Wattage: 40 Watts
- Maximum Wattage: 60 Watts
- Fixture Rating: Dry
Product Usage Instructions
- Before starting installation, ensure that you have all the parts and components required.
- Take one check ring and slide it over the coupler on top of the frame. Screw the threaded pipe into the coupler and then slide the metal tube over the threaded pipe. Place another check ring over the top of the metal tube and secure it with the fixture loop.
- Safely attach the fixture to the outlet box. Install the bulbs (not included) and connect the power.
- When dressing the fixture, start with the crystal labeled (A).
- IMPORTANT: Apply crystal sets in alphabetical order.
Product Crystal Sets
A. 18 Sets – (1) 30x400mm
B. 30 Sets – (1) 30x300mm
C. 42 Sets – (1) 30x200mm
Note: Ensure that the short end of each crystal set is positioned above the frame.
WARNING: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes. Turn off the power before installation.
CAUTION: For extended use, it is recommended to use LED bulbs.
ASSEMBLY INSTRUCTION
MODEL #HAY-1405-AG
WARNING
- All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes.
- You will need 12-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max
- USE LED BULBS FOR EXTENDED USE This fixture is Dry rated
How to Install
- Do a complete inventory of all parts and components before you start installing.
- Slide one check ring over the coupler on top of the frame. Screw the threaded pipe into the coupler and slide the metal tube over the threaded pipe. Slide another check ring over the top of the metal tube and secure it with fixture loop.
- After safely attaching the fixture to the outlet box, install bulbs (not included) and proceed to connect the power.
- When you begin to dress the fixture, start with the crystal labeled (A).
- IMPORTANT: Apply crystal sets in alphabetical order.
DETAILED ILLUSTRATION
Crystal Sets
- A. 18Sets. (1)30x400mm
- B. 30Sets. (1)30x300mm
- C. 42Sets. (1)30x200mm
WARNING: This product can expose you to Lead. which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov.
PART NUMBER
- A. (2)-Wire Connector
- B. (1)-Mounting Plate
- C. (2)-Outlet Box Screws
- D. (1)-Lock washer
- E. (1)-Hex Nut
- F. (1)-Nipple
- G. (1)-Canopy; w5″ x h1.25″ (XFB1405AGCAN5IN)
- H. (1)-Collar Ring
- I. (1)-Collar Loop
- J. (1)-Chain; 72″, 5mm (XFB1405AGCHA5MM)
- K. (1)-Ground Wire
- L. (1)-Fixture Loop
- M. (1)-Metal Tube; 8.5″, 16MM thickness (XFB1405AGROD8.5IN)
- N. (1)-Threaded Pipe; 9.5″, 12MM thickness (XFB1405AGSTEM9.5IN)
- O. (2)-Check Ring
- P. (1)-Frame
PART BAGⅠ: Includes Parts A, C
PART BAG Ⅱ: Includes Parts B, D, E, F, H, I
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>